Veris Industries AG01 Sensor
The Veris Industries AG01 is a high-performance carbon monoxide (CO) sensor module engineered specifically for integration with the Veris GWN series gas detection platform. Utilizing advanced electrochemical sensing technology, the AG01 provides superior selectivity and linear output for monitoring CO levels in demanding commercial environments like parking garages, mechanical rooms, and industrial facilities. This plug-and-play module allows for rapid field replacement, maintaining system uptime by as much as 90% compared to traditional hard-wired sensor swaps. Each unit arrives factory calibrated, ensuring out-of-the-box precision with a measurement range of 0-300 ppm and a resolution of 1 ppm. The microprocessor-based design supports OSHA air quality compliance by enabling dual-stage relay contacts at 25/35 ppm (low) and 180 ppm (high) through its compatible base unit. Its robust build is certified to CE and ETL standards, meeting UL 61010-1 EMC performance requirements for building automation and life-safety ventilation control.
Key Benefits for HVACR Contractors
- Optimized Compatibility: Verified for seamless interface with Veris GWN gas platform units, ensuring reliable bus communication and power distribution.
- Precision Detection: High-accuracy ±3% full-scale sensing minimizes nuisance alarms while providing early warnings of gasoline engine exhaust or furnace leaks.
- Modular Serviceability: Eliminate the need for complete sensor housing replacement; the replaceable CO sensing element plugs directly into the existing backplate to reduce labor costs.
- Pre-Calibrated Reliability: Factory testing ensures high-level stability and eliminates the requirement for immediate field calibration during commissioning.
- Wide Environmental Range: Performance-rated for temperatures from -4°F to 122°F, making it suitable for unheated parking structures and plant rooms.
Common Questions
Is the Veris AG01 compatible with other gas monitors?
No, the AG01 is a proprietary CO sensor element designed exclusively for the Veris GWN Series gas platform. It utilizes a specific pin connector that is not compatible with third-party or older HWG/GMD platforms.
Does the AG01 require field calibration upon installation?
The sensor is factory calibrated and ready for immediate deployment. However, local codes or project specifications may require a bump test or verification with CO calibration gas to ensure system-wide relay logic is functioning correctly.
What is the typical lifespan of the AG01 sensor module?
The electrochemical sensor within the AG01 module typically performs reliably for several years depending on environmental conditions like extreme humidity or constant gas exposure. Replacing just the AG01 module is the standard procedure when the GWN base indicates a sensor end-of-life signal.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $294.23
-65%$294.23
$102.98Veris Industries AG01 Sensor
The Veris Industries AG01 is a high-performance carbon monoxide (CO) sensor module engineered specifically for integration with the Veris GWN series gas detection platform. Utilizing advanced electrochemical sensing technology, the AG01 provides superior selectivity and linear output for monitoring CO levels in demanding commercial environments like parking garages, mechanical rooms, and industrial facilities. This plug-and-play module allows for rapid field replacement, maintaining system uptime by as much as 90% compared to traditional hard-wired sensor swaps. Each unit arrives factory calibrated, ensuring out-of-the-box precision with a measurement range of 0-300 ppm and a resolution of 1 ppm. The microprocessor-based design supports OSHA air quality compliance by enabling dual-stage relay contacts at 25/35 ppm (low) and 180 ppm (high) through its compatible base unit. Its robust build is certified to CE and ETL standards, meeting UL 61010-1 EMC performance requirements for building automation and life-safety ventilation control.
Key Benefits for HVACR Contractors
- Optimized Compatibility: Verified for seamless interface with Veris GWN gas platform units, ensuring reliable bus communication and power distribution.
- Precision Detection: High-accuracy ±3% full-scale sensing minimizes nuisance alarms while providing early warnings of gasoline engine exhaust or furnace leaks.
- Modular Serviceability: Eliminate the need for complete sensor housing replacement; the replaceable CO sensing element plugs directly into the existing backplate to reduce labor costs.
- Pre-Calibrated Reliability: Factory testing ensures high-level stability and eliminates the requirement for immediate field calibration during commissioning.
- Wide Environmental Range: Performance-rated for temperatures from -4°F to 122°F, making it suitable for unheated parking structures and plant rooms.
Common Questions
Is the Veris AG01 compatible with other gas monitors?
No, the AG01 is a proprietary CO sensor element designed exclusively for the Veris GWN Series gas platform. It utilizes a specific pin connector that is not compatible with third-party or older HWG/GMD platforms.
Does the AG01 require field calibration upon installation?
The sensor is factory calibrated and ready for immediate deployment. However, local codes or project specifications may require a bump test or verification with CO calibration gas to ensure system-wide relay logic is functioning correctly.
What is the typical lifespan of the AG01 sensor module?
The electrochemical sensor within the AG01 module typically performs reliably for several years depending on environmental conditions like extreme humidity or constant gas exposure. Replacing just the AG01 module is the standard procedure when the GWN base indicates a sensor end-of-life signal.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Veris Industries AG01 is a high-performance carbon monoxide (CO) sensor module engineered specifically for integration with the Veris GWN series gas detection platform. Utilizing advanced electrochemical sensing technology, the AG01 provides superior selectivity and linear output for monitoring CO levels in demanding commercial environments like parking garages, mechanical rooms, and industrial facilities. This plug-and-play module allows for rapid field replacement, maintaining system uptime by as much as 90% compared to traditional hard-wired sensor swaps. Each unit arrives factory calibrated, ensuring out-of-the-box precision with a measurement range of 0-300 ppm and a resolution of 1 ppm. The microprocessor-based design supports OSHA air quality compliance by enabling dual-stage relay contacts at 25/35 ppm (low) and 180 ppm (high) through its compatible base unit. Its robust build is certified to CE and ETL standards, meeting UL 61010-1 EMC performance requirements for building automation and life-safety ventilation control.
Key Benefits for HVACR Contractors
- Optimized Compatibility: Verified for seamless interface with Veris GWN gas platform units, ensuring reliable bus communication and power distribution.
- Precision Detection: High-accuracy ±3% full-scale sensing minimizes nuisance alarms while providing early warnings of gasoline engine exhaust or furnace leaks.
- Modular Serviceability: Eliminate the need for complete sensor housing replacement; the replaceable CO sensing element plugs directly into the existing backplate to reduce labor costs.
- Pre-Calibrated Reliability: Factory testing ensures high-level stability and eliminates the requirement for immediate field calibration during commissioning.
- Wide Environmental Range: Performance-rated for temperatures from -4°F to 122°F, making it suitable for unheated parking structures and plant rooms.
Common Questions
Is the Veris AG01 compatible with other gas monitors?
No, the AG01 is a proprietary CO sensor element designed exclusively for the Veris GWN Series gas platform. It utilizes a specific pin connector that is not compatible with third-party or older HWG/GMD platforms.
Does the AG01 require field calibration upon installation?
The sensor is factory calibrated and ready for immediate deployment. However, local codes or project specifications may require a bump test or verification with CO calibration gas to ensure system-wide relay logic is functioning correctly.
What is the typical lifespan of the AG01 sensor module?
The electrochemical sensor within the AG01 module typically performs reliably for several years depending on environmental conditions like extreme humidity or constant gas exposure. Replacing just the AG01 module is the standard procedure when the GWN base indicates a sensor end-of-life signal.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
