Veris Industries H-932 Sensor
The Veris Industries H-932 Hawkeye current transducer is a heavy-duty solution for commercial and industrial motor status monitoring. This split-core current sensor features a switch-selectable amperage range of 0-30/60/120A, allowing you to maximize resolution and accuracy (±2% F.S.) for a variety of fractional and full-sized motor loads. Designed for seamless integration into building automation systems, the H-932 provides a linear 0-5VDC output proportional to the sensed current, making it a reliable choice for load trending and fan or pump status verification.
For contractors looking to reduce site labor, this unit includes an integrated SPST command relay rated for 5A at 250VAC. This combination allows for both start/stop control and status feedback in a single device, eliminating the need for separate components and extra conduit runs. The self-gripping iris and removable mounting bracket provide maximum physical flexibility within crowded motor control centers or electrical enclosures. Since it is induced from the monitored conductor, no external power is required for the analog output, simplifying your wiring and reducing failure points in your HVAC control circuits.
Key Benefits for Technicians
- Switch-Selectable Ranges: Field-adjust between 30A, 60A, and 120A to match specific motor nameplate data without needing multiple sensors.
- All-In-One Control: Combines a current transducer and a command relay to handle both the pilot duty signal and load status.
- Fast Retrofits: The split-core design allows for installation over existing wires without disconnecting the conductor.
- No Jumpers: Calibration is handled via a three-position slide switch, reducing the risk of installation error or lost parts.
- Mounting Versatility: The bracket can be attached to the back, side, or bottom, or it can be DIN-rail mounted using the optional AH01 clip.
Common Questions & Answers
How do I scale the 0-5VDC signal in my controller?
Scale your software to match the range selected on the physical switch. For example, if you set the H-932 to the 60A range, a 2.5VDC signal represents 30A of sensed current. Always verify full-scale current draw before setting the switch for peak resolution.
Can I use this for monitoring VFD output?
The H-932 is optimized for 50/60 Hz cycles on the line side of a Variable Frequency Drive. For critical monitoring on the load side of a VFD, contractors often prefer dedicated frequency-compensated models to ensure signal stability across varying pulse width modulation (PWM) speeds.
What is the maximum wire size for the sensing window?
The internal window accommodates a monitored conductor up to 0.8 inches (21 mm) in diameter. Ensure the conductor is centered for the most consistent accuracy.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Veris Industries H-932 Sensor
The Veris Industries H-932 Hawkeye current transducer is a heavy-duty solution for commercial and industrial motor status monitoring. This split-core current sensor features a switch-selectable amperage range of 0-30/60/120A, allowing you to maximize resolution and accuracy (±2% F.S.) for a variety of fractional and full-sized motor loads. Designed for seamless integration into building automation systems, the H-932 provides a linear 0-5VDC output proportional to the sensed current, making it a reliable choice for load trending and fan or pump status verification.
For contractors looking to reduce site labor, this unit includes an integrated SPST command relay rated for 5A at 250VAC. This combination allows for both start/stop control and status feedback in a single device, eliminating the need for separate components and extra conduit runs. The self-gripping iris and removable mounting bracket provide maximum physical flexibility within crowded motor control centers or electrical enclosures. Since it is induced from the monitored conductor, no external power is required for the analog output, simplifying your wiring and reducing failure points in your HVAC control circuits.
Key Benefits for Technicians
- Switch-Selectable Ranges: Field-adjust between 30A, 60A, and 120A to match specific motor nameplate data without needing multiple sensors.
- All-In-One Control: Combines a current transducer and a command relay to handle both the pilot duty signal and load status.
- Fast Retrofits: The split-core design allows for installation over existing wires without disconnecting the conductor.
- No Jumpers: Calibration is handled via a three-position slide switch, reducing the risk of installation error or lost parts.
- Mounting Versatility: The bracket can be attached to the back, side, or bottom, or it can be DIN-rail mounted using the optional AH01 clip.
Common Questions & Answers
How do I scale the 0-5VDC signal in my controller?
Scale your software to match the range selected on the physical switch. For example, if you set the H-932 to the 60A range, a 2.5VDC signal represents 30A of sensed current. Always verify full-scale current draw before setting the switch for peak resolution.
Can I use this for monitoring VFD output?
The H-932 is optimized for 50/60 Hz cycles on the line side of a Variable Frequency Drive. For critical monitoring on the load side of a VFD, contractors often prefer dedicated frequency-compensated models to ensure signal stability across varying pulse width modulation (PWM) speeds.
What is the maximum wire size for the sensing window?
The internal window accommodates a monitored conductor up to 0.8 inches (21 mm) in diameter. Ensure the conductor is centered for the most consistent accuracy.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Veris Industries H-932 Hawkeye current transducer is a heavy-duty solution for commercial and industrial motor status monitoring. This split-core current sensor features a switch-selectable amperage range of 0-30/60/120A, allowing you to maximize resolution and accuracy (±2% F.S.) for a variety of fractional and full-sized motor loads. Designed for seamless integration into building automation systems, the H-932 provides a linear 0-5VDC output proportional to the sensed current, making it a reliable choice for load trending and fan or pump status verification.
For contractors looking to reduce site labor, this unit includes an integrated SPST command relay rated for 5A at 250VAC. This combination allows for both start/stop control and status feedback in a single device, eliminating the need for separate components and extra conduit runs. The self-gripping iris and removable mounting bracket provide maximum physical flexibility within crowded motor control centers or electrical enclosures. Since it is induced from the monitored conductor, no external power is required for the analog output, simplifying your wiring and reducing failure points in your HVAC control circuits.
Key Benefits for Technicians
- Switch-Selectable Ranges: Field-adjust between 30A, 60A, and 120A to match specific motor nameplate data without needing multiple sensors.
- All-In-One Control: Combines a current transducer and a command relay to handle both the pilot duty signal and load status.
- Fast Retrofits: The split-core design allows for installation over existing wires without disconnecting the conductor.
- No Jumpers: Calibration is handled via a three-position slide switch, reducing the risk of installation error or lost parts.
- Mounting Versatility: The bracket can be attached to the back, side, or bottom, or it can be DIN-rail mounted using the optional AH01 clip.
Common Questions & Answers
How do I scale the 0-5VDC signal in my controller?
Scale your software to match the range selected on the physical switch. For example, if you set the H-932 to the 60A range, a 2.5VDC signal represents 30A of sensed current. Always verify full-scale current draw before setting the switch for peak resolution.
Can I use this for monitoring VFD output?
The H-932 is optimized for 50/60 Hz cycles on the line side of a Variable Frequency Drive. For critical monitoring on the load side of a VFD, contractors often prefer dedicated frequency-compensated models to ensure signal stability across varying pulse width modulation (PWM) speeds.
What is the maximum wire size for the sensing window?
The internal window accommodates a monitored conductor up to 0.8 inches (21 mm) in diameter. Ensure the conductor is centered for the most consistent accuracy.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
