Setra SRPMR25WBA2E Pressure Monitor
The Setra SRPMR25WBA2E Room Pressure Monitor is a precision-engineered solution for critical low differential pressure environments where maintaining strict airflow control is non-negotiable. Featuring a ±0.25" WC pressure range and ±0.5% FS accuracy, this unit is designed specifically for hospital isolation rooms, cleanrooms, and laboratories. Unlike flow-through designs that risk cross-contamination, the SRPM utilizes a dead-ended capacitance sensor, ensuring a secure barrier between the monitored zone and reference space. Operating on 24 VAC, this model includes native BACnet MS/TP output, allowing seamless integration into high-level building automation systems (BAS) for real-time monitoring and data logging.
The intuitive backlit LCD touchscreen simplifies field configuration, enabling technicians to set alarm setpoints, adjust time delays, and switch between protection and isolation modes without specialized software. Designed for the active contractor, the SRPMR25WBA2E mounts into a standard electrical box, drastically reducing installation labor. With its NIST-traceable calibration and digital door status input, this monitor provides the reliable sensing required to meet CDC and ASHRAE guidelines for infectious disease and protective environment rooms.
Key Benefits- Enhanced System Integration: Native BACnet communications allow for direct reporting to the central Building Automation System without additional gateways.
- Reduced Maintenance: The on-board dead-ended sensor eliminates drift associated with fouling in flow-based sensors, maintaining calibration stability over long periods.
- Proactive Alarming: Visual and audible alerts, including red/green room status LEDs and a 9999-second variable alarm delay, help prevent nuisance trips while ensuring safety compliance.
- Field Versatility: Bi-directional sensing allows the same unit to be used for positive or negative pressure monitoring, accommodating changing room use-cases.
How do I handle a "stuck" pressure reading on the display?
Ensure the plumbing is correct; the high (positive) port must be connected to the room and the low (negative) port to the reference corridor. If the display is unresponsive, check for terminal connector stability or perform a power cycle.
Can I use this for both isolation and protection modes?
Yes. The SRPMR25WBA2E features a "Quick Room Mode Change" through the touchscreen interface, allowing you to switch between isolation, protection, or standby modes to suit the current occupancy requirements.
What electrical box is required for mounting?
This Setra Room Pressure Monitor is designed to mount into a standard off-the-shelf 4"x4" electrical box with a plaster ring, eliminating the need for custom hardware during the rough-in stage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,822.39
-65%$1,822.39
$637.84Setra SRPMR25WBA2E Pressure Monitor
The Setra SRPMR25WBA2E Room Pressure Monitor is a precision-engineered solution for critical low differential pressure environments where maintaining strict airflow control is non-negotiable. Featuring a ±0.25" WC pressure range and ±0.5% FS accuracy, this unit is designed specifically for hospital isolation rooms, cleanrooms, and laboratories. Unlike flow-through designs that risk cross-contamination, the SRPM utilizes a dead-ended capacitance sensor, ensuring a secure barrier between the monitored zone and reference space. Operating on 24 VAC, this model includes native BACnet MS/TP output, allowing seamless integration into high-level building automation systems (BAS) for real-time monitoring and data logging.
The intuitive backlit LCD touchscreen simplifies field configuration, enabling technicians to set alarm setpoints, adjust time delays, and switch between protection and isolation modes without specialized software. Designed for the active contractor, the SRPMR25WBA2E mounts into a standard electrical box, drastically reducing installation labor. With its NIST-traceable calibration and digital door status input, this monitor provides the reliable sensing required to meet CDC and ASHRAE guidelines for infectious disease and protective environment rooms.
Key Benefits- Enhanced System Integration: Native BACnet communications allow for direct reporting to the central Building Automation System without additional gateways.
- Reduced Maintenance: The on-board dead-ended sensor eliminates drift associated with fouling in flow-based sensors, maintaining calibration stability over long periods.
- Proactive Alarming: Visual and audible alerts, including red/green room status LEDs and a 9999-second variable alarm delay, help prevent nuisance trips while ensuring safety compliance.
- Field Versatility: Bi-directional sensing allows the same unit to be used for positive or negative pressure monitoring, accommodating changing room use-cases.
How do I handle a "stuck" pressure reading on the display?
Ensure the plumbing is correct; the high (positive) port must be connected to the room and the low (negative) port to the reference corridor. If the display is unresponsive, check for terminal connector stability or perform a power cycle.
Can I use this for both isolation and protection modes?
Yes. The SRPMR25WBA2E features a "Quick Room Mode Change" through the touchscreen interface, allowing you to switch between isolation, protection, or standby modes to suit the current occupancy requirements.
What electrical box is required for mounting?
This Setra Room Pressure Monitor is designed to mount into a standard off-the-shelf 4"x4" electrical box with a plaster ring, eliminating the need for custom hardware during the rough-in stage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Setra SRPMR25WBA2E Room Pressure Monitor is a precision-engineered solution for critical low differential pressure environments where maintaining strict airflow control is non-negotiable. Featuring a ±0.25" WC pressure range and ±0.5% FS accuracy, this unit is designed specifically for hospital isolation rooms, cleanrooms, and laboratories. Unlike flow-through designs that risk cross-contamination, the SRPM utilizes a dead-ended capacitance sensor, ensuring a secure barrier between the monitored zone and reference space. Operating on 24 VAC, this model includes native BACnet MS/TP output, allowing seamless integration into high-level building automation systems (BAS) for real-time monitoring and data logging.
The intuitive backlit LCD touchscreen simplifies field configuration, enabling technicians to set alarm setpoints, adjust time delays, and switch between protection and isolation modes without specialized software. Designed for the active contractor, the SRPMR25WBA2E mounts into a standard electrical box, drastically reducing installation labor. With its NIST-traceable calibration and digital door status input, this monitor provides the reliable sensing required to meet CDC and ASHRAE guidelines for infectious disease and protective environment rooms.
Key Benefits- Enhanced System Integration: Native BACnet communications allow for direct reporting to the central Building Automation System without additional gateways.
- Reduced Maintenance: The on-board dead-ended sensor eliminates drift associated with fouling in flow-based sensors, maintaining calibration stability over long periods.
- Proactive Alarming: Visual and audible alerts, including red/green room status LEDs and a 9999-second variable alarm delay, help prevent nuisance trips while ensuring safety compliance.
- Field Versatility: Bi-directional sensing allows the same unit to be used for positive or negative pressure monitoring, accommodating changing room use-cases.
How do I handle a "stuck" pressure reading on the display?
Ensure the plumbing is correct; the high (positive) port must be connected to the room and the low (negative) port to the reference corridor. If the display is unresponsive, check for terminal connector stability or perform a power cycle.
Can I use this for both isolation and protection modes?
Yes. The SRPMR25WBA2E features a "Quick Room Mode Change" through the touchscreen interface, allowing you to switch between isolation, protection, or standby modes to suit the current occupancy requirements.
What electrical box is required for mounting?
This Setra Room Pressure Monitor is designed to mount into a standard off-the-shelf 4"x4" electrical box with a plaster ring, eliminating the need for custom hardware during the rough-in stage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
