Setra 2301050PD3V2EB Manifold
When you are handling critical wet-to-wet applications, the Setra 2301050PD3V2EB Manifold provides the specialized performance required for high-accuracy differential pressure sensing. Unlike standard sensors that calculate differential pressure using two separate gauge sensors, the Model 230 utilizes a true wet-to-wet differential pressure transducer featuring a single 17-4 stainless steel diaphragm. This 0 to 50 PSID unidirectional pressure range unit ensures that your measurement is not impacted by line pressure fluctuations, offering a consistent ±0.25% full-scale accuracy.
This configuration includes a 3-valve machined brass manifold, which simplifies installation and maintenance by allowing for easy zeroing and bleeding without breaking process lines. The 0.05-10.05 VDC output provides a linear analog signal that is 20 times faster than oil-filled sensors, making it ideal for fast-response HVAC and process control systems. Equipped with Viton bleed screw seals and a NEMA 4 rated housing, this transducer is built for industrial-grade durability in demanding environments.
Key Benefits- Superior Accuracy: Single diaphragm design eliminates errors common in dual-sensor calculation methods.
- Rapid Response: Capacitive stainless steel sensor technology responds significantly faster than typical fluid-filled units.
- Installation Efficiency: Integrated 3-valve manifold reduces potential leak points and speeds up commissioning.
- Chemical Compatibility: Viton seals and 17-4 stainless steel wetted parts enable use with various liquids and gases.
- Robust Protection: NEMA 4/IP65 enclosure protects internal electronics from moisture and dust ingress.
What is the purpose of the 3-valve manifold on this unit?
The manifold allows a technician to isolate the sensor from the process, equalize the pressure to check the zero point, and bleed air from the lines through the Viton bleed screw seals without removing the device.
Is the output compatible with 0-10V control systems?
Yes, the 0.05-10.05 VDC output is designed to interface seamlessly with standard 24 VDC controllers and building automation systems.
Can this sensor be used for water and glycol mixtures?
The 17-4 PH stainless steel wetted components are compatible with most non-corrosive liquids and gases typically found in hydronic HVAC systems.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $881.64
-65%$881.64
$308.57Setra 2301050PD3V2EB Manifold
When you are handling critical wet-to-wet applications, the Setra 2301050PD3V2EB Manifold provides the specialized performance required for high-accuracy differential pressure sensing. Unlike standard sensors that calculate differential pressure using two separate gauge sensors, the Model 230 utilizes a true wet-to-wet differential pressure transducer featuring a single 17-4 stainless steel diaphragm. This 0 to 50 PSID unidirectional pressure range unit ensures that your measurement is not impacted by line pressure fluctuations, offering a consistent ±0.25% full-scale accuracy.
This configuration includes a 3-valve machined brass manifold, which simplifies installation and maintenance by allowing for easy zeroing and bleeding without breaking process lines. The 0.05-10.05 VDC output provides a linear analog signal that is 20 times faster than oil-filled sensors, making it ideal for fast-response HVAC and process control systems. Equipped with Viton bleed screw seals and a NEMA 4 rated housing, this transducer is built for industrial-grade durability in demanding environments.
Key Benefits- Superior Accuracy: Single diaphragm design eliminates errors common in dual-sensor calculation methods.
- Rapid Response: Capacitive stainless steel sensor technology responds significantly faster than typical fluid-filled units.
- Installation Efficiency: Integrated 3-valve manifold reduces potential leak points and speeds up commissioning.
- Chemical Compatibility: Viton seals and 17-4 stainless steel wetted parts enable use with various liquids and gases.
- Robust Protection: NEMA 4/IP65 enclosure protects internal electronics from moisture and dust ingress.
What is the purpose of the 3-valve manifold on this unit?
The manifold allows a technician to isolate the sensor from the process, equalize the pressure to check the zero point, and bleed air from the lines through the Viton bleed screw seals without removing the device.
Is the output compatible with 0-10V control systems?
Yes, the 0.05-10.05 VDC output is designed to interface seamlessly with standard 24 VDC controllers and building automation systems.
Can this sensor be used for water and glycol mixtures?
The 17-4 PH stainless steel wetted components are compatible with most non-corrosive liquids and gases typically found in hydronic HVAC systems.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you are handling critical wet-to-wet applications, the Setra 2301050PD3V2EB Manifold provides the specialized performance required for high-accuracy differential pressure sensing. Unlike standard sensors that calculate differential pressure using two separate gauge sensors, the Model 230 utilizes a true wet-to-wet differential pressure transducer featuring a single 17-4 stainless steel diaphragm. This 0 to 50 PSID unidirectional pressure range unit ensures that your measurement is not impacted by line pressure fluctuations, offering a consistent ±0.25% full-scale accuracy.
This configuration includes a 3-valve machined brass manifold, which simplifies installation and maintenance by allowing for easy zeroing and bleeding without breaking process lines. The 0.05-10.05 VDC output provides a linear analog signal that is 20 times faster than oil-filled sensors, making it ideal for fast-response HVAC and process control systems. Equipped with Viton bleed screw seals and a NEMA 4 rated housing, this transducer is built for industrial-grade durability in demanding environments.
Key Benefits- Superior Accuracy: Single diaphragm design eliminates errors common in dual-sensor calculation methods.
- Rapid Response: Capacitive stainless steel sensor technology responds significantly faster than typical fluid-filled units.
- Installation Efficiency: Integrated 3-valve manifold reduces potential leak points and speeds up commissioning.
- Chemical Compatibility: Viton seals and 17-4 stainless steel wetted parts enable use with various liquids and gases.
- Robust Protection: NEMA 4/IP65 enclosure protects internal electronics from moisture and dust ingress.
What is the purpose of the 3-valve manifold on this unit?
The manifold allows a technician to isolate the sensor from the process, equalize the pressure to check the zero point, and bleed air from the lines through the Viton bleed screw seals without removing the device.
Is the output compatible with 0-10V control systems?
Yes, the 0.05-10.05 VDC output is designed to interface seamlessly with standard 24 VDC controllers and building automation systems.
Can this sensor be used for water and glycol mixtures?
The 17-4 PH stainless steel wetted components are compatible with most non-corrosive liquids and gases typically found in hydronic HVAC systems.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
