KMC Controls CSP-5002 Controller
The KMC Controls CSP-5002 is a professional-grade, pressure-independent VAV Flow Controller-Actuator designed for precise airflow management in variable air volume terminal units. Engineered as a combination unit, this analog electronic controller features an onboard flow-through sensor utilizing twin platinum resistance temperature detectors for a high-accuracy velocity setpoint range of 0 to 3,300 fpm. As a CW (Clockwise) to close model, it delivers a minimum output torque of 50 in-lb, ensuring reliable damper manipulation in demanding commercial HVAC environments. The CSP-5002 integrates seamlessly with CTE-5100 series room thermostats, allowing for full-range flow control and easy field adjustments via internal potentiometers or the thermostat interface. Its microprocessor-based logic supports diverse applications, including proportional or two-position reheat and fan induction. Technicians will appreciate the magnetic clutch, gear disengagement button for manual positioning, and internal LED status indicators that confirm opening and closing cycles during HVAC system optimization and air balancing procedures.
Key Benefits- High-Precision Sensing: Features twin platinum RTDs for a 3% setpoint accuracy across the entire velocity range.
- Versatile Integration: Compatible with single or multi-point differential pressure measuring stations and pitot tubes.
- Field Adjustability: Adjustable mechanical end stops and jumpers allow for rapid rotation setup and flow limit configuration.
- Robust Performance: Provides significant 50 in-lb torque to handle standard VAV box dampers without stalling.
- Diagnostic Feedback: Visual confirmation of actuator movement via green (open) and red (close) internal LEDs.
How do I change the rotation direction on the CSP-5002?
While the CSP-5002 is factory-set for CW to close, the rotation direction can be field-reversed by accessing the internal jumper located behind the protective door tab.
What is the proper mounting procedure for the damper shaft?
This HVACR actuator mounts directly onto a standard 1/2-inch diameter shaft. For 3/8-inch shafts, the HFO-0011 adaptor is required for secure installation.
Can I use this for air balancing without a laptop?
Yes, airflow velocity limits and setpoints can be adjusted manually using the onboard MIN and MAX potentiometers or through a compatible CTE-5100 series thermostat.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
KMC Controls CSP-5002 Controller
The KMC Controls CSP-5002 is a professional-grade, pressure-independent VAV Flow Controller-Actuator designed for precise airflow management in variable air volume terminal units. Engineered as a combination unit, this analog electronic controller features an onboard flow-through sensor utilizing twin platinum resistance temperature detectors for a high-accuracy velocity setpoint range of 0 to 3,300 fpm. As a CW (Clockwise) to close model, it delivers a minimum output torque of 50 in-lb, ensuring reliable damper manipulation in demanding commercial HVAC environments. The CSP-5002 integrates seamlessly with CTE-5100 series room thermostats, allowing for full-range flow control and easy field adjustments via internal potentiometers or the thermostat interface. Its microprocessor-based logic supports diverse applications, including proportional or two-position reheat and fan induction. Technicians will appreciate the magnetic clutch, gear disengagement button for manual positioning, and internal LED status indicators that confirm opening and closing cycles during HVAC system optimization and air balancing procedures.
Key Benefits- High-Precision Sensing: Features twin platinum RTDs for a 3% setpoint accuracy across the entire velocity range.
- Versatile Integration: Compatible with single or multi-point differential pressure measuring stations and pitot tubes.
- Field Adjustability: Adjustable mechanical end stops and jumpers allow for rapid rotation setup and flow limit configuration.
- Robust Performance: Provides significant 50 in-lb torque to handle standard VAV box dampers without stalling.
- Diagnostic Feedback: Visual confirmation of actuator movement via green (open) and red (close) internal LEDs.
How do I change the rotation direction on the CSP-5002?
While the CSP-5002 is factory-set for CW to close, the rotation direction can be field-reversed by accessing the internal jumper located behind the protective door tab.
What is the proper mounting procedure for the damper shaft?
This HVACR actuator mounts directly onto a standard 1/2-inch diameter shaft. For 3/8-inch shafts, the HFO-0011 adaptor is required for secure installation.
Can I use this for air balancing without a laptop?
Yes, airflow velocity limits and setpoints can be adjusted manually using the onboard MIN and MAX potentiometers or through a compatible CTE-5100 series thermostat.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The KMC Controls CSP-5002 is a professional-grade, pressure-independent VAV Flow Controller-Actuator designed for precise airflow management in variable air volume terminal units. Engineered as a combination unit, this analog electronic controller features an onboard flow-through sensor utilizing twin platinum resistance temperature detectors for a high-accuracy velocity setpoint range of 0 to 3,300 fpm. As a CW (Clockwise) to close model, it delivers a minimum output torque of 50 in-lb, ensuring reliable damper manipulation in demanding commercial HVAC environments. The CSP-5002 integrates seamlessly with CTE-5100 series room thermostats, allowing for full-range flow control and easy field adjustments via internal potentiometers or the thermostat interface. Its microprocessor-based logic supports diverse applications, including proportional or two-position reheat and fan induction. Technicians will appreciate the magnetic clutch, gear disengagement button for manual positioning, and internal LED status indicators that confirm opening and closing cycles during HVAC system optimization and air balancing procedures.
Key Benefits- High-Precision Sensing: Features twin platinum RTDs for a 3% setpoint accuracy across the entire velocity range.
- Versatile Integration: Compatible with single or multi-point differential pressure measuring stations and pitot tubes.
- Field Adjustability: Adjustable mechanical end stops and jumpers allow for rapid rotation setup and flow limit configuration.
- Robust Performance: Provides significant 50 in-lb torque to handle standard VAV box dampers without stalling.
- Diagnostic Feedback: Visual confirmation of actuator movement via green (open) and red (close) internal LEDs.
How do I change the rotation direction on the CSP-5002?
While the CSP-5002 is factory-set for CW to close, the rotation direction can be field-reversed by accessing the internal jumper located behind the protective door tab.
What is the proper mounting procedure for the damper shaft?
This HVACR actuator mounts directly onto a standard 1/2-inch diameter shaft. For 3/8-inch shafts, the HFO-0011 adaptor is required for secure installation.
Can I use this for air balancing without a laptop?
Yes, airflow velocity limits and setpoints can be adjusted manually using the onboard MIN and MAX potentiometers or through a compatible CTE-5100 series thermostat.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
