KMC Controls CSC-3025-10 Control
The KMC Controls CSC-3025-10 is a high-performance pneumatic reset volume controller engineered specifically for terminal unit applications, including direct compatibility with Trane VAV units. This sub-master air velocity controller features a universal design capable of managing both normally open and normally closed dampers, making it a versatile field replacement for existing VAV box controls. With a factory-set 8 PSI reset start point and a 0 to 2" WC differential pressure range, this unit ensures precise airflow modulation based on the signal from a master thermostat.
Built for the rigors of commercial HVACR environments, the CSC-3025-10 utilizes a high-flow output (0 to supply pressure) and maintains a low air consumption rate of 46.1 SCIM at 20 psig. Contractors can easily perform field adjustments to the reset start point and span (0-10 psig) to match specific system requirements. Its robust ABS housing and 1/4" push-on fittings simplify integration into existing pneumatic control sequences, providing reliable velocity pressure sensing and consistent airflow setpoint control.
- Universal Application: Supports both Direct Acting (DA) and Reverse Acting (RA) reset configurations for maximum flexibility on the job site.
- Precise Multi-Point Calibration: Features independent adjustment knobs for minimum and maximum airflow setpoints to optimize terminal unit performance.
- High-Flow Capacity: Engineered for systems requiring rapid response times and high-volume delivery.
- Trane Compatible: Specifically cross-referenced to replace Trane X131900524010 and legacy CSC-series controllers in Trane air handlers.
- Compact Mounting: Rugged plastic construction with an included mounting bracket for secure installation in tight plenum spaces.
Common Questions
Is the CSC-3025-10 compatible with non-Trane systems?
Yes, while it is optimized for Trane terminal units, its universal design allows it to replace most 0-2" range pneumatic controllers from major manufacturers when calibrated to the system's specific reset parameters.
How do I adjust the reset start point in the field?
The unit is factory-set at 8 PSI, but the start point is field-adjustable between 0 and 10 PSI. Technicians should use a pressure gauge at the "T" port to verify the thermostat signal before adjusting the internal setpoint screw.
Can this controller be mounted in any orientation?
The CSC-3000 series is position-sensitive. For accurate differential pressure sensing, it must be mounted and calibrated in either a strictly horizontal or vertical plane as specified in the technical data sheet.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
KMC Controls CSC-3025-10 Control
The KMC Controls CSC-3025-10 is a high-performance pneumatic reset volume controller engineered specifically for terminal unit applications, including direct compatibility with Trane VAV units. This sub-master air velocity controller features a universal design capable of managing both normally open and normally closed dampers, making it a versatile field replacement for existing VAV box controls. With a factory-set 8 PSI reset start point and a 0 to 2" WC differential pressure range, this unit ensures precise airflow modulation based on the signal from a master thermostat.
Built for the rigors of commercial HVACR environments, the CSC-3025-10 utilizes a high-flow output (0 to supply pressure) and maintains a low air consumption rate of 46.1 SCIM at 20 psig. Contractors can easily perform field adjustments to the reset start point and span (0-10 psig) to match specific system requirements. Its robust ABS housing and 1/4" push-on fittings simplify integration into existing pneumatic control sequences, providing reliable velocity pressure sensing and consistent airflow setpoint control.
- Universal Application: Supports both Direct Acting (DA) and Reverse Acting (RA) reset configurations for maximum flexibility on the job site.
- Precise Multi-Point Calibration: Features independent adjustment knobs for minimum and maximum airflow setpoints to optimize terminal unit performance.
- High-Flow Capacity: Engineered for systems requiring rapid response times and high-volume delivery.
- Trane Compatible: Specifically cross-referenced to replace Trane X131900524010 and legacy CSC-series controllers in Trane air handlers.
- Compact Mounting: Rugged plastic construction with an included mounting bracket for secure installation in tight plenum spaces.
Common Questions
Is the CSC-3025-10 compatible with non-Trane systems?
Yes, while it is optimized for Trane terminal units, its universal design allows it to replace most 0-2" range pneumatic controllers from major manufacturers when calibrated to the system's specific reset parameters.
How do I adjust the reset start point in the field?
The unit is factory-set at 8 PSI, but the start point is field-adjustable between 0 and 10 PSI. Technicians should use a pressure gauge at the "T" port to verify the thermostat signal before adjusting the internal setpoint screw.
Can this controller be mounted in any orientation?
The CSC-3000 series is position-sensitive. For accurate differential pressure sensing, it must be mounted and calibrated in either a strictly horizontal or vertical plane as specified in the technical data sheet.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The KMC Controls CSC-3025-10 is a high-performance pneumatic reset volume controller engineered specifically for terminal unit applications, including direct compatibility with Trane VAV units. This sub-master air velocity controller features a universal design capable of managing both normally open and normally closed dampers, making it a versatile field replacement for existing VAV box controls. With a factory-set 8 PSI reset start point and a 0 to 2" WC differential pressure range, this unit ensures precise airflow modulation based on the signal from a master thermostat.
Built for the rigors of commercial HVACR environments, the CSC-3025-10 utilizes a high-flow output (0 to supply pressure) and maintains a low air consumption rate of 46.1 SCIM at 20 psig. Contractors can easily perform field adjustments to the reset start point and span (0-10 psig) to match specific system requirements. Its robust ABS housing and 1/4" push-on fittings simplify integration into existing pneumatic control sequences, providing reliable velocity pressure sensing and consistent airflow setpoint control.
- Universal Application: Supports both Direct Acting (DA) and Reverse Acting (RA) reset configurations for maximum flexibility on the job site.
- Precise Multi-Point Calibration: Features independent adjustment knobs for minimum and maximum airflow setpoints to optimize terminal unit performance.
- High-Flow Capacity: Engineered for systems requiring rapid response times and high-volume delivery.
- Trane Compatible: Specifically cross-referenced to replace Trane X131900524010 and legacy CSC-series controllers in Trane air handlers.
- Compact Mounting: Rugged plastic construction with an included mounting bracket for secure installation in tight plenum spaces.
Common Questions
Is the CSC-3025-10 compatible with non-Trane systems?
Yes, while it is optimized for Trane terminal units, its universal design allows it to replace most 0-2" range pneumatic controllers from major manufacturers when calibrated to the system's specific reset parameters.
How do I adjust the reset start point in the field?
The unit is factory-set at 8 PSI, but the start point is field-adjustable between 0 and 10 PSI. Technicians should use a pressure gauge at the "T" port to verify the thermostat signal before adjusting the internal setpoint screw.
Can this controller be mounted in any orientation?
The CSC-3000 series is position-sensitive. For accurate differential pressure sensing, it must be mounted and calibrated in either a strictly horizontal or vertical plane as specified in the technical data sheet.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
