Fireye YP300 Module
The Fireye YP300 Module is a high-performance BurnerLogix programmer module engineered for precise burner management in industrial and commercial heating applications. This plug-in module integrates seamlessly into YB110 or ZB110 chassis, defining essential operational sequences including recycle operation and low fire start. Designed for reliability in complex combustion environments, it provides a 4-second Flame Failure Response Time (FFRT), ensuring rapid safety shutoffs that meet stringent flame safeguard standards.
For systems requiring advanced control, the Fireye YP300 features early spark termination to minimize electrode wear and optimize the transition from pilot to main flame. All operational parameters are keypad selectable via a compatible display, allowing technicians to fine-tune timings for pre-purge, PTFI, and MTFI directly in the field. This microprocessor-based control supports multiple fuel types and is essential for maintaining code-compliant flame monitoring protection on automatically ignited oil or gas burners.
Key Benefits- Optimized Ignition: Features early spark termination to improve stability and extend technical component life.
- Configurable Performance: Keypad selectable parameters allow for field-adjustable timings without swapping hardware.
- Safe Sequencing: Integrated low fire start and proven running interlocks ensure consistent start-up cycles.
- Rapid Response: Precise 4-second FFRT provides a reliable buffer for complex industrial burner loads.
- Modular Design: Simple plug-in installation into BurnerLogix YB series chassis minimizes downtime during maintenance.
What is the difference between the YP300 and YP302 modules?
The Fireye YP300 is configured for recycle operation and a 4-second FFRT, whereas the YP302 typically provides different response timings or non-recycle modes. Always verify the specific timing requirements of your local code before selection.
Is this module compatible with infrared scanners?
Yes, the YP300 works with various flame detectors; however, when used with IR-based BurnerLogix controls prior to version 12, an "IR Learn" procedure is necessary for verified signal strength.
Can I adjust the pre-purge time on this unit?
Specific parameters such as pre-purge time and trial-for-ignition timings are keypad selectable, provided a compatible alpha-numeric display is connected to the BurnerLogix chassis.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $667.30
-65%$667.30
$233.55Fireye YP300 Module
The Fireye YP300 Module is a high-performance BurnerLogix programmer module engineered for precise burner management in industrial and commercial heating applications. This plug-in module integrates seamlessly into YB110 or ZB110 chassis, defining essential operational sequences including recycle operation and low fire start. Designed for reliability in complex combustion environments, it provides a 4-second Flame Failure Response Time (FFRT), ensuring rapid safety shutoffs that meet stringent flame safeguard standards.
For systems requiring advanced control, the Fireye YP300 features early spark termination to minimize electrode wear and optimize the transition from pilot to main flame. All operational parameters are keypad selectable via a compatible display, allowing technicians to fine-tune timings for pre-purge, PTFI, and MTFI directly in the field. This microprocessor-based control supports multiple fuel types and is essential for maintaining code-compliant flame monitoring protection on automatically ignited oil or gas burners.
Key Benefits- Optimized Ignition: Features early spark termination to improve stability and extend technical component life.
- Configurable Performance: Keypad selectable parameters allow for field-adjustable timings without swapping hardware.
- Safe Sequencing: Integrated low fire start and proven running interlocks ensure consistent start-up cycles.
- Rapid Response: Precise 4-second FFRT provides a reliable buffer for complex industrial burner loads.
- Modular Design: Simple plug-in installation into BurnerLogix YB series chassis minimizes downtime during maintenance.
What is the difference between the YP300 and YP302 modules?
The Fireye YP300 is configured for recycle operation and a 4-second FFRT, whereas the YP302 typically provides different response timings or non-recycle modes. Always verify the specific timing requirements of your local code before selection.
Is this module compatible with infrared scanners?
Yes, the YP300 works with various flame detectors; however, when used with IR-based BurnerLogix controls prior to version 12, an "IR Learn" procedure is necessary for verified signal strength.
Can I adjust the pre-purge time on this unit?
Specific parameters such as pre-purge time and trial-for-ignition timings are keypad selectable, provided a compatible alpha-numeric display is connected to the BurnerLogix chassis.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye YP300 Module is a high-performance BurnerLogix programmer module engineered for precise burner management in industrial and commercial heating applications. This plug-in module integrates seamlessly into YB110 or ZB110 chassis, defining essential operational sequences including recycle operation and low fire start. Designed for reliability in complex combustion environments, it provides a 4-second Flame Failure Response Time (FFRT), ensuring rapid safety shutoffs that meet stringent flame safeguard standards.
For systems requiring advanced control, the Fireye YP300 features early spark termination to minimize electrode wear and optimize the transition from pilot to main flame. All operational parameters are keypad selectable via a compatible display, allowing technicians to fine-tune timings for pre-purge, PTFI, and MTFI directly in the field. This microprocessor-based control supports multiple fuel types and is essential for maintaining code-compliant flame monitoring protection on automatically ignited oil or gas burners.
Key Benefits- Optimized Ignition: Features early spark termination to improve stability and extend technical component life.
- Configurable Performance: Keypad selectable parameters allow for field-adjustable timings without swapping hardware.
- Safe Sequencing: Integrated low fire start and proven running interlocks ensure consistent start-up cycles.
- Rapid Response: Precise 4-second FFRT provides a reliable buffer for complex industrial burner loads.
- Modular Design: Simple plug-in installation into BurnerLogix YB series chassis minimizes downtime during maintenance.
What is the difference between the YP300 and YP302 modules?
The Fireye YP300 is configured for recycle operation and a 4-second FFRT, whereas the YP302 typically provides different response timings or non-recycle modes. Always verify the specific timing requirements of your local code before selection.
Is this module compatible with infrared scanners?
Yes, the YP300 works with various flame detectors; however, when used with IR-based BurnerLogix controls prior to version 12, an "IR Learn" procedure is necessary for verified signal strength.
Can I adjust the pre-purge time on this unit?
Specific parameters such as pre-purge time and trial-for-ignition timings are keypad selectable, provided a compatible alpha-numeric display is connected to the BurnerLogix chassis.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
