Fireye FX20-1 Servo Motor
The Fireye FX20-1 Servo Motor is a high-precision 24VDC actuator designed for the exacting requirements of industrial burner systems. Engineered to drive fuel valves and air dampers, this Modbus-controlled servo delivers a nominal torque of 20Nm (15 ft-lb) with a maximum rotation angle of 100 degrees. As a veteran technician knows, the integration of quick disconnect connectors significantly reduces field wiring time and simplifies the replacement process in critical combustion loops. This industrial combustion actuator features a stepper motor design that interprets commands via RS-485 at a 56k baud rate, ensuring seamless compatibility with Fireye Nexus FX systems, specifically the NXF4000 and PPC4000 controllers.
Built for harsh environments, the Fireye FX20-1 maintains a NEMA 4 IP65 rating and operates reliably across a temperature range of -4??F to +140??F. The 100% duty cycle and 30-second actuating time for a 90-degree stroke provide the consistent Nexus flame safeguard performance required for optimal fuel-air ratio control. Whether you are performing a new installation or a site retrofit, the arbitrary mounting orientation and internal feedback potentiometer allow for flexible integration into existing burner management systems.
Key Benefits of the Fireye FX20-1- High Torque Output: Delivers 20Nm (15 ft-lb) of torque, sufficient for heavy-duty fuel valves and large air dampers.
- Precise Positioning: Utilizes a stepper motor and internal potentiometer for accurate Modbus-based motion control.
- Rapid Installation: Features quick disconnect connectors to streamline electrical termination and field maintenance.
- Rugged Reliability: NEMA 4 and IP65 rated housing protects internal components from moisture and industrial contaminants.
- System Compatibility: Pre-configured for 56k baud rate communication, making it a direct match for Fireye NXF4000 and PPC4000 controllers.
Is the FX20-1 compatible with the older Fireye 945 series servos?
No, the FX series uses a different communication protocol and mounting footprint; it is not a direct replacement for the legacy 945 series.
What is the proper grounding procedure for this servo motor?
Technicians should always connect the ground first to eliminate electrostatic discharge (ESD) potential before connecting the 24VDC power or Modbus communication wires.
Can the travel time or rotation angle be adjusted in the field?
The rotation angle and actuating speed are limited by the firmware and the commands sent via the burner management system's Modbus RTU protocol.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Fireye FX20-1 Servo Motor
The Fireye FX20-1 Servo Motor is a high-precision 24VDC actuator designed for the exacting requirements of industrial burner systems. Engineered to drive fuel valves and air dampers, this Modbus-controlled servo delivers a nominal torque of 20Nm (15 ft-lb) with a maximum rotation angle of 100 degrees. As a veteran technician knows, the integration of quick disconnect connectors significantly reduces field wiring time and simplifies the replacement process in critical combustion loops. This industrial combustion actuator features a stepper motor design that interprets commands via RS-485 at a 56k baud rate, ensuring seamless compatibility with Fireye Nexus FX systems, specifically the NXF4000 and PPC4000 controllers.
Built for harsh environments, the Fireye FX20-1 maintains a NEMA 4 IP65 rating and operates reliably across a temperature range of -4??F to +140??F. The 100% duty cycle and 30-second actuating time for a 90-degree stroke provide the consistent Nexus flame safeguard performance required for optimal fuel-air ratio control. Whether you are performing a new installation or a site retrofit, the arbitrary mounting orientation and internal feedback potentiometer allow for flexible integration into existing burner management systems.
Key Benefits of the Fireye FX20-1- High Torque Output: Delivers 20Nm (15 ft-lb) of torque, sufficient for heavy-duty fuel valves and large air dampers.
- Precise Positioning: Utilizes a stepper motor and internal potentiometer for accurate Modbus-based motion control.
- Rapid Installation: Features quick disconnect connectors to streamline electrical termination and field maintenance.
- Rugged Reliability: NEMA 4 and IP65 rated housing protects internal components from moisture and industrial contaminants.
- System Compatibility: Pre-configured for 56k baud rate communication, making it a direct match for Fireye NXF4000 and PPC4000 controllers.
Is the FX20-1 compatible with the older Fireye 945 series servos?
No, the FX series uses a different communication protocol and mounting footprint; it is not a direct replacement for the legacy 945 series.
What is the proper grounding procedure for this servo motor?
Technicians should always connect the ground first to eliminate electrostatic discharge (ESD) potential before connecting the 24VDC power or Modbus communication wires.
Can the travel time or rotation angle be adjusted in the field?
The rotation angle and actuating speed are limited by the firmware and the commands sent via the burner management system's Modbus RTU protocol.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye FX20-1 Servo Motor is a high-precision 24VDC actuator designed for the exacting requirements of industrial burner systems. Engineered to drive fuel valves and air dampers, this Modbus-controlled servo delivers a nominal torque of 20Nm (15 ft-lb) with a maximum rotation angle of 100 degrees. As a veteran technician knows, the integration of quick disconnect connectors significantly reduces field wiring time and simplifies the replacement process in critical combustion loops. This industrial combustion actuator features a stepper motor design that interprets commands via RS-485 at a 56k baud rate, ensuring seamless compatibility with Fireye Nexus FX systems, specifically the NXF4000 and PPC4000 controllers.
Built for harsh environments, the Fireye FX20-1 maintains a NEMA 4 IP65 rating and operates reliably across a temperature range of -4??F to +140??F. The 100% duty cycle and 30-second actuating time for a 90-degree stroke provide the consistent Nexus flame safeguard performance required for optimal fuel-air ratio control. Whether you are performing a new installation or a site retrofit, the arbitrary mounting orientation and internal feedback potentiometer allow for flexible integration into existing burner management systems.
Key Benefits of the Fireye FX20-1- High Torque Output: Delivers 20Nm (15 ft-lb) of torque, sufficient for heavy-duty fuel valves and large air dampers.
- Precise Positioning: Utilizes a stepper motor and internal potentiometer for accurate Modbus-based motion control.
- Rapid Installation: Features quick disconnect connectors to streamline electrical termination and field maintenance.
- Rugged Reliability: NEMA 4 and IP65 rated housing protects internal components from moisture and industrial contaminants.
- System Compatibility: Pre-configured for 56k baud rate communication, making it a direct match for Fireye NXF4000 and PPC4000 controllers.
Is the FX20-1 compatible with the older Fireye 945 series servos?
No, the FX series uses a different communication protocol and mounting footprint; it is not a direct replacement for the legacy 945 series.
What is the proper grounding procedure for this servo motor?
Technicians should always connect the ground first to eliminate electrostatic discharge (ESD) potential before connecting the 24VDC power or Modbus communication wires.
Can the travel time or rotation angle be adjusted in the field?
The rotation angle and actuating speed are limited by the firmware and the commands sent via the burner management system's Modbus RTU protocol.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
