Fireye YB110IR2 Chassis
The Fireye YB110IR2 is a robust 120V flame safeguard chassis specifically engineered for continuous-duty industrial and commercial burners. As part of the BurnerLogix Y-Series, this unit integrates a high-performance infrared (IR) amplifier designed for reliable flame signal detection in gas and oil-fired applications. It features an internal microcontroller-based design that executes precise sequencing, timing, and safety diagnostics. This chassis is compatible with the YP100, YP200, and YP300 programmers, offering a modular solution for integrated burner management. The YB110IR2 infrared sensor circuitry is tuned to detect the flicker frequency of the flame, ensuring high immunity to hot refractory interference and background radiation. For technicians, this flame monitoring system provides essential diagnostic LEDs and a dedicated display module connection to facilitate rapid troubleshooting of interlock strings and pilot ignition cycles during commissioning or maintenance.
Key Benefits for Technicians- Interchangeable Programmers: Provides flexibility across various application requirements by swapping YP-series plug-in modules.
- Infrared Sensitivity: Optimized for IR scanners to provide stable flame signals on problematic fuels or high-refractory environments.
- Non-Volatile Memory: Retains lockout history and critical configuration data even during a total power loss.
- Integral Diagnostics: Simplifies sequence tracking and identifies specific faults in the limit string or fuel valve circuits.
- Retrofit Compatibility: Standardized footprint allows for efficient upgrades of legacy burner management systems with minimal wiring changes.
Is the YB110IR2 compatible with UV scanners?
No, the YB110IR2 is specifically hardwired with an internal infrared amplifier. For ultraviolet detection, a YB110UV chassis must be used with the appropriate UV scanner.
Does this chassis include the programmer or display?
This is the power housing and amplifier chassis only. The YP-series programmer and the BLV512 or BLL510 display modules must be purchased separately based on your specific sequence requirements.
How do I resolve a 'Flame Signal Low' error on this unit?
Verify the alignment of the 48PT2 infrared scanner and check for soot buildup on the lens. Ensure the scanner wiring is not run in the same conduit as high-voltage ignition cables to prevent EMI interference.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,526.47
-65%$1,526.47
$534.26Fireye YB110IR2 Chassis
The Fireye YB110IR2 is a robust 120V flame safeguard chassis specifically engineered for continuous-duty industrial and commercial burners. As part of the BurnerLogix Y-Series, this unit integrates a high-performance infrared (IR) amplifier designed for reliable flame signal detection in gas and oil-fired applications. It features an internal microcontroller-based design that executes precise sequencing, timing, and safety diagnostics. This chassis is compatible with the YP100, YP200, and YP300 programmers, offering a modular solution for integrated burner management. The YB110IR2 infrared sensor circuitry is tuned to detect the flicker frequency of the flame, ensuring high immunity to hot refractory interference and background radiation. For technicians, this flame monitoring system provides essential diagnostic LEDs and a dedicated display module connection to facilitate rapid troubleshooting of interlock strings and pilot ignition cycles during commissioning or maintenance.
Key Benefits for Technicians- Interchangeable Programmers: Provides flexibility across various application requirements by swapping YP-series plug-in modules.
- Infrared Sensitivity: Optimized for IR scanners to provide stable flame signals on problematic fuels or high-refractory environments.
- Non-Volatile Memory: Retains lockout history and critical configuration data even during a total power loss.
- Integral Diagnostics: Simplifies sequence tracking and identifies specific faults in the limit string or fuel valve circuits.
- Retrofit Compatibility: Standardized footprint allows for efficient upgrades of legacy burner management systems with minimal wiring changes.
Is the YB110IR2 compatible with UV scanners?
No, the YB110IR2 is specifically hardwired with an internal infrared amplifier. For ultraviolet detection, a YB110UV chassis must be used with the appropriate UV scanner.
Does this chassis include the programmer or display?
This is the power housing and amplifier chassis only. The YP-series programmer and the BLV512 or BLL510 display modules must be purchased separately based on your specific sequence requirements.
How do I resolve a 'Flame Signal Low' error on this unit?
Verify the alignment of the 48PT2 infrared scanner and check for soot buildup on the lens. Ensure the scanner wiring is not run in the same conduit as high-voltage ignition cables to prevent EMI interference.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye YB110IR2 is a robust 120V flame safeguard chassis specifically engineered for continuous-duty industrial and commercial burners. As part of the BurnerLogix Y-Series, this unit integrates a high-performance infrared (IR) amplifier designed for reliable flame signal detection in gas and oil-fired applications. It features an internal microcontroller-based design that executes precise sequencing, timing, and safety diagnostics. This chassis is compatible with the YP100, YP200, and YP300 programmers, offering a modular solution for integrated burner management. The YB110IR2 infrared sensor circuitry is tuned to detect the flicker frequency of the flame, ensuring high immunity to hot refractory interference and background radiation. For technicians, this flame monitoring system provides essential diagnostic LEDs and a dedicated display module connection to facilitate rapid troubleshooting of interlock strings and pilot ignition cycles during commissioning or maintenance.
Key Benefits for Technicians- Interchangeable Programmers: Provides flexibility across various application requirements by swapping YP-series plug-in modules.
- Infrared Sensitivity: Optimized for IR scanners to provide stable flame signals on problematic fuels or high-refractory environments.
- Non-Volatile Memory: Retains lockout history and critical configuration data even during a total power loss.
- Integral Diagnostics: Simplifies sequence tracking and identifies specific faults in the limit string or fuel valve circuits.
- Retrofit Compatibility: Standardized footprint allows for efficient upgrades of legacy burner management systems with minimal wiring changes.
Is the YB110IR2 compatible with UV scanners?
No, the YB110IR2 is specifically hardwired with an internal infrared amplifier. For ultraviolet detection, a YB110UV chassis must be used with the appropriate UV scanner.
Does this chassis include the programmer or display?
This is the power housing and amplifier chassis only. The YP-series programmer and the BLV512 or BLL510 display modules must be purchased separately based on your specific sequence requirements.
How do I resolve a 'Flame Signal Low' error on this unit?
Verify the alignment of the 48PT2 infrared scanner and check for soot buildup on the lens. Ensure the scanner wiring is not run in the same conduit as high-voltage ignition cables to prevent EMI interference.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
