Fireye YP148 Programmer Module
The Fireye YP148 Programmer Module is a specialized plug-in component engineered for high-demand industrial burner applications using the BurnerLogix control system. Known for its non-recycle operation and advanced modulation capabilities, the YP148 integrates a proprietary valve-prove test and an active-high low-gas-pressure check to ensure rigorous safety sequences before ignition. Designed to manage the complete sequencing of purge, ignition, and main flame, this flame safeguard programmer features a fixed 4-second flame failure response time (FFRT), making it essential for contractors servicing large-scale commercial boilers and furnaces that require precision timing and dependable terminal logic.
As a veteran-grade combustion control module, the YP148 is distinctive for including a fuel-selection switch and the ability to toggle Burner On/Off through the keypad. It facilitates open damper proving and is compatible with YB110 and YB230 chassis environments. For technicians managing HVACR burner management systems, the YP148 provides a robust solution for automated ignition cycles while maintaining high-integrity oversight of the pilot ignition and trial-for-ignition (PTFI/MTFI) phases. Its plug-in architecture allows for rapid field replacement, ensuring minimal downtime and seamless boiler control system maintenance in compliance with modern safety codes.
Key Benefits- Advanced Safety Logic: Features valve-prove testing and low-gas-pressure checks to prevent unsafe firing conditions.
- Simplified Commissioning: Supports keypad-selectable parameters for precise control over purge and ignition timing.
- Enhanced Compatibility: Seamlessly installs into standard BurnerLogix YB chassis, supporting various flame amplifiers and scanners.
- Operational Versatility: Includes an integrated fuel-selection switch for dual-fuel burner applications.
- Reliable Performance: Delivers a consistent 4-second FFRT to meet industrial safety standards for flame monitoring.
What is the difference between the Fireye YP148 and YP184?
The primary difference is the logic state of the low-gas-pressure check; the YP148 is active high, whereas the YP184 is configured as active low. Professionals must verify the specific wiring and switch requirements of the field installation before selection.
Can the YP148 be used with infrared flame scanners?
Yes, but for BurnerLogix controls prior to Version 12, it is mandatory to perform an "IR LEARN" operation to ensure reliable flame detection and prevent nuisance lockouts.
Does this module support recycling operation?
No, the YP148 is specifically designed for non-recycle operation. If the running interlock circuit (L1-P) opens during the run cycle, the system will initiate a safety lockout rather than attempting an automatic restart.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,148.65
-65%$1,148.65
$402.03Fireye YP148 Programmer Module
The Fireye YP148 Programmer Module is a specialized plug-in component engineered for high-demand industrial burner applications using the BurnerLogix control system. Known for its non-recycle operation and advanced modulation capabilities, the YP148 integrates a proprietary valve-prove test and an active-high low-gas-pressure check to ensure rigorous safety sequences before ignition. Designed to manage the complete sequencing of purge, ignition, and main flame, this flame safeguard programmer features a fixed 4-second flame failure response time (FFRT), making it essential for contractors servicing large-scale commercial boilers and furnaces that require precision timing and dependable terminal logic.
As a veteran-grade combustion control module, the YP148 is distinctive for including a fuel-selection switch and the ability to toggle Burner On/Off through the keypad. It facilitates open damper proving and is compatible with YB110 and YB230 chassis environments. For technicians managing HVACR burner management systems, the YP148 provides a robust solution for automated ignition cycles while maintaining high-integrity oversight of the pilot ignition and trial-for-ignition (PTFI/MTFI) phases. Its plug-in architecture allows for rapid field replacement, ensuring minimal downtime and seamless boiler control system maintenance in compliance with modern safety codes.
Key Benefits- Advanced Safety Logic: Features valve-prove testing and low-gas-pressure checks to prevent unsafe firing conditions.
- Simplified Commissioning: Supports keypad-selectable parameters for precise control over purge and ignition timing.
- Enhanced Compatibility: Seamlessly installs into standard BurnerLogix YB chassis, supporting various flame amplifiers and scanners.
- Operational Versatility: Includes an integrated fuel-selection switch for dual-fuel burner applications.
- Reliable Performance: Delivers a consistent 4-second FFRT to meet industrial safety standards for flame monitoring.
What is the difference between the Fireye YP148 and YP184?
The primary difference is the logic state of the low-gas-pressure check; the YP148 is active high, whereas the YP184 is configured as active low. Professionals must verify the specific wiring and switch requirements of the field installation before selection.
Can the YP148 be used with infrared flame scanners?
Yes, but for BurnerLogix controls prior to Version 12, it is mandatory to perform an "IR LEARN" operation to ensure reliable flame detection and prevent nuisance lockouts.
Does this module support recycling operation?
No, the YP148 is specifically designed for non-recycle operation. If the running interlock circuit (L1-P) opens during the run cycle, the system will initiate a safety lockout rather than attempting an automatic restart.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye YP148 Programmer Module is a specialized plug-in component engineered for high-demand industrial burner applications using the BurnerLogix control system. Known for its non-recycle operation and advanced modulation capabilities, the YP148 integrates a proprietary valve-prove test and an active-high low-gas-pressure check to ensure rigorous safety sequences before ignition. Designed to manage the complete sequencing of purge, ignition, and main flame, this flame safeguard programmer features a fixed 4-second flame failure response time (FFRT), making it essential for contractors servicing large-scale commercial boilers and furnaces that require precision timing and dependable terminal logic.
As a veteran-grade combustion control module, the YP148 is distinctive for including a fuel-selection switch and the ability to toggle Burner On/Off through the keypad. It facilitates open damper proving and is compatible with YB110 and YB230 chassis environments. For technicians managing HVACR burner management systems, the YP148 provides a robust solution for automated ignition cycles while maintaining high-integrity oversight of the pilot ignition and trial-for-ignition (PTFI/MTFI) phases. Its plug-in architecture allows for rapid field replacement, ensuring minimal downtime and seamless boiler control system maintenance in compliance with modern safety codes.
Key Benefits- Advanced Safety Logic: Features valve-prove testing and low-gas-pressure checks to prevent unsafe firing conditions.
- Simplified Commissioning: Supports keypad-selectable parameters for precise control over purge and ignition timing.
- Enhanced Compatibility: Seamlessly installs into standard BurnerLogix YB chassis, supporting various flame amplifiers and scanners.
- Operational Versatility: Includes an integrated fuel-selection switch for dual-fuel burner applications.
- Reliable Performance: Delivers a consistent 4-second FFRT to meet industrial safety standards for flame monitoring.
What is the difference between the Fireye YP148 and YP184?
The primary difference is the logic state of the low-gas-pressure check; the YP148 is active high, whereas the YP184 is configured as active low. Professionals must verify the specific wiring and switch requirements of the field installation before selection.
Can the YP148 be used with infrared flame scanners?
Yes, but for BurnerLogix controls prior to Version 12, it is mandatory to perform an "IR LEARN" operation to ensure reliable flame detection and prevent nuisance lockouts.
Does this module support recycling operation?
No, the YP148 is specifically designed for non-recycle operation. If the running interlock circuit (L1-P) opens during the run cycle, the system will initiate a safety lockout rather than attempting an automatic restart.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
