Fireye EP265 Programmer Module
The Fireye EP265 Programmer Module is a critical component for Flame-Monitor burner management systems, specifically engineered for automatic gas or oil burners. This plug-in programmer manages the sequence of operation, integrating a fixed 30-second prepurge period to ensure the combustion chamber is clear of volatile gases before ignition. The Fireye EP265 provides 10-second Trial for Ignition (TFI) timing for both pilot and main flame, ensuring robust ignition cycles in industrial heating environments. Designed for the EB150 series chassis, this module supports recycle mode, allowing the system to restart the sequence automatically upon a momentary flame signal loss or power interruption. It utilizes advanced microprocessor circuitry to monitor flame signal strength and interlock status, providing reliable field performance for commercial boiler controls. Contractors rely on the EP265 for its precise timing accuracy and compatibility with ultraviolet or infrared flame scanners, minimizing downtime and maintaining high safety standards in complex mechanical rooms.
Key Benefits for Contractors
- Fixed Timing Precision: Provides a mandatory 30-second purge and 10/10 TFI sequence to meet strict safety protocols.
- Automatic Recycle Operation: Reduces nuisance lockouts by attempting a re-ignition sequence if the flame signal is interrupted during the run cycle.
- LED Diagnostics: Simplifies troubleshooting by communicating internal program status and fault history directly through the programmer interface.
- Drop-in Compatibility: Fits standard Fireye Flame-Monitor chassis, allowing for quick field replacement without rewiring the entire control cabinet.
- High-Temperature Durability: Engineered to withstand the ambient conditions typical of industrial burner applications.
Common Questions
Is the Fireye EP265 compatible with non-recycling applications?
The EP265 is specifically designed for recycle operation. If your safety logic requires a non-recycling lockout upon flame failure, you should consider the EP160 or EP161 series modules depending on your specific timing requirements.
Can I adjust the purge timing on this module?
No, the EP265 Programmer Module features a factory-set 30-second purge. For applications requiring different purge durations, a different EP-series module must be selected as the timing is hard-coded into the microprocessor.
What flame scanners can be used with this programmer?
Compatibility is determined by the amplifier module installed in the chassis. This programmer works in conjunction with infrared, UV, or flame rod amplifiers to supervise the combustion process effectively.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,695.84
-65%$1,695.84
$593.54Fireye EP265 Programmer Module
The Fireye EP265 Programmer Module is a critical component for Flame-Monitor burner management systems, specifically engineered for automatic gas or oil burners. This plug-in programmer manages the sequence of operation, integrating a fixed 30-second prepurge period to ensure the combustion chamber is clear of volatile gases before ignition. The Fireye EP265 provides 10-second Trial for Ignition (TFI) timing for both pilot and main flame, ensuring robust ignition cycles in industrial heating environments. Designed for the EB150 series chassis, this module supports recycle mode, allowing the system to restart the sequence automatically upon a momentary flame signal loss or power interruption. It utilizes advanced microprocessor circuitry to monitor flame signal strength and interlock status, providing reliable field performance for commercial boiler controls. Contractors rely on the EP265 for its precise timing accuracy and compatibility with ultraviolet or infrared flame scanners, minimizing downtime and maintaining high safety standards in complex mechanical rooms.
Key Benefits for Contractors
- Fixed Timing Precision: Provides a mandatory 30-second purge and 10/10 TFI sequence to meet strict safety protocols.
- Automatic Recycle Operation: Reduces nuisance lockouts by attempting a re-ignition sequence if the flame signal is interrupted during the run cycle.
- LED Diagnostics: Simplifies troubleshooting by communicating internal program status and fault history directly through the programmer interface.
- Drop-in Compatibility: Fits standard Fireye Flame-Monitor chassis, allowing for quick field replacement without rewiring the entire control cabinet.
- High-Temperature Durability: Engineered to withstand the ambient conditions typical of industrial burner applications.
Common Questions
Is the Fireye EP265 compatible with non-recycling applications?
The EP265 is specifically designed for recycle operation. If your safety logic requires a non-recycling lockout upon flame failure, you should consider the EP160 or EP161 series modules depending on your specific timing requirements.
Can I adjust the purge timing on this module?
No, the EP265 Programmer Module features a factory-set 30-second purge. For applications requiring different purge durations, a different EP-series module must be selected as the timing is hard-coded into the microprocessor.
What flame scanners can be used with this programmer?
Compatibility is determined by the amplifier module installed in the chassis. This programmer works in conjunction with infrared, UV, or flame rod amplifiers to supervise the combustion process effectively.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye EP265 Programmer Module is a critical component for Flame-Monitor burner management systems, specifically engineered for automatic gas or oil burners. This plug-in programmer manages the sequence of operation, integrating a fixed 30-second prepurge period to ensure the combustion chamber is clear of volatile gases before ignition. The Fireye EP265 provides 10-second Trial for Ignition (TFI) timing for both pilot and main flame, ensuring robust ignition cycles in industrial heating environments. Designed for the EB150 series chassis, this module supports recycle mode, allowing the system to restart the sequence automatically upon a momentary flame signal loss or power interruption. It utilizes advanced microprocessor circuitry to monitor flame signal strength and interlock status, providing reliable field performance for commercial boiler controls. Contractors rely on the EP265 for its precise timing accuracy and compatibility with ultraviolet or infrared flame scanners, minimizing downtime and maintaining high safety standards in complex mechanical rooms.
Key Benefits for Contractors
- Fixed Timing Precision: Provides a mandatory 30-second purge and 10/10 TFI sequence to meet strict safety protocols.
- Automatic Recycle Operation: Reduces nuisance lockouts by attempting a re-ignition sequence if the flame signal is interrupted during the run cycle.
- LED Diagnostics: Simplifies troubleshooting by communicating internal program status and fault history directly through the programmer interface.
- Drop-in Compatibility: Fits standard Fireye Flame-Monitor chassis, allowing for quick field replacement without rewiring the entire control cabinet.
- High-Temperature Durability: Engineered to withstand the ambient conditions typical of industrial burner applications.
Common Questions
Is the Fireye EP265 compatible with non-recycling applications?
The EP265 is specifically designed for recycle operation. If your safety logic requires a non-recycling lockout upon flame failure, you should consider the EP160 or EP161 series modules depending on your specific timing requirements.
Can I adjust the purge timing on this module?
No, the EP265 Programmer Module features a factory-set 30-second purge. For applications requiring different purge durations, a different EP-series module must be selected as the timing is hard-coded into the microprocessor.
What flame scanners can be used with this programmer?
Compatibility is determined by the amplifier module installed in the chassis. This programmer works in conjunction with infrared, UV, or flame rod amplifiers to supervise the combustion process effectively.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
