Fireye EP161 Module
The Fireye EP161 is a high-performance flame safeguard programmer module designed for use with the Flame-Monitor system. Engineered for industrial and commercial burner applications, this plug-in programmer provides essential sequencing, timing, and monitoring functions to ensure safe burner operation. The unit features a fixed 60-second purge cycle, essential for clearing the combustion chamber of residual gases prior to ignition. This module is critical for technicians managing E110 control systems, offering precise control over the 10-second Trial for Ignition (TFI) or optional 30-second TFI depending on terminal configuration.
Built for reliability in harsh boiler room environments, the Fireye EP161 module monitors flame signals and manages fuel valves with tight tolerance. It is non-recycling (NR) upon flame failure during the run period, requiring a manual reset or power cycle to ensure the cause of failure is investigated. This burner controller module integrates seamlessly with existing Flame-Monitor chassis, utilizing on-board microprocessors to run self-diagnostics and provide clear status indications via the system display. When replacing legacy boiler controls, the EP161 ensures your combustion system meets modern safety standards while maintaining high operational uptime.
Key Benefits:
- Fixed 60-Second Pre-Purge: Ensures consistent safety protocols and compliance with combustion standards before every start-up.
- Flexible TFI Timing: Supports both 10-second and 30-second TFI intervals, allowing for precise adjustment based on specific fuel requirements.
- Non-Recycling Logic: Increases safety by preventing automatic restarts following a flame failure during the combustion cycle.
- LED Status Diagnostics: Facilitates rapid troubleshooting for field technicians by identifying lockout causes within the Fireye Flame-Monitor sequence.
- Rugged Plug-in Design: Minimizes downtime with a simple installation process that fits standard Fireye EB700 chassis.
Common Questions:
Can the purge timing be adjusted on the Fireye EP161?
No, the EP161 features a fixed 60-second purge cycle. If your application requires a shorter or longer purge duration, you must select the appropriate EP series module designed for that specific timing.
What does the 'NR' designation signify for this module?
The 'NR' stands for Non-Recycling. If a flame failure occurs during the main burner sequence, the module will lock out rather than attempting to restart the purge and ignition cycle automatically.
Which chassis is compatible with the Fireye EP161?
The EP161 is designed to be used with the Flame-Monitor EB700 series chassis. Ensure your wiring base and flame scanner (UV, infrared, or flame rod) are compatible with the integrated amplifier.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Fireye EP161 Module
The Fireye EP161 is a high-performance flame safeguard programmer module designed for use with the Flame-Monitor system. Engineered for industrial and commercial burner applications, this plug-in programmer provides essential sequencing, timing, and monitoring functions to ensure safe burner operation. The unit features a fixed 60-second purge cycle, essential for clearing the combustion chamber of residual gases prior to ignition. This module is critical for technicians managing E110 control systems, offering precise control over the 10-second Trial for Ignition (TFI) or optional 30-second TFI depending on terminal configuration.
Built for reliability in harsh boiler room environments, the Fireye EP161 module monitors flame signals and manages fuel valves with tight tolerance. It is non-recycling (NR) upon flame failure during the run period, requiring a manual reset or power cycle to ensure the cause of failure is investigated. This burner controller module integrates seamlessly with existing Flame-Monitor chassis, utilizing on-board microprocessors to run self-diagnostics and provide clear status indications via the system display. When replacing legacy boiler controls, the EP161 ensures your combustion system meets modern safety standards while maintaining high operational uptime.
Key Benefits:
- Fixed 60-Second Pre-Purge: Ensures consistent safety protocols and compliance with combustion standards before every start-up.
- Flexible TFI Timing: Supports both 10-second and 30-second TFI intervals, allowing for precise adjustment based on specific fuel requirements.
- Non-Recycling Logic: Increases safety by preventing automatic restarts following a flame failure during the combustion cycle.
- LED Status Diagnostics: Facilitates rapid troubleshooting for field technicians by identifying lockout causes within the Fireye Flame-Monitor sequence.
- Rugged Plug-in Design: Minimizes downtime with a simple installation process that fits standard Fireye EB700 chassis.
Common Questions:
Can the purge timing be adjusted on the Fireye EP161?
No, the EP161 features a fixed 60-second purge cycle. If your application requires a shorter or longer purge duration, you must select the appropriate EP series module designed for that specific timing.
What does the 'NR' designation signify for this module?
The 'NR' stands for Non-Recycling. If a flame failure occurs during the main burner sequence, the module will lock out rather than attempting to restart the purge and ignition cycle automatically.
Which chassis is compatible with the Fireye EP161?
The EP161 is designed to be used with the Flame-Monitor EB700 series chassis. Ensure your wiring base and flame scanner (UV, infrared, or flame rod) are compatible with the integrated amplifier.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye EP161 is a high-performance flame safeguard programmer module designed for use with the Flame-Monitor system. Engineered for industrial and commercial burner applications, this plug-in programmer provides essential sequencing, timing, and monitoring functions to ensure safe burner operation. The unit features a fixed 60-second purge cycle, essential for clearing the combustion chamber of residual gases prior to ignition. This module is critical for technicians managing E110 control systems, offering precise control over the 10-second Trial for Ignition (TFI) or optional 30-second TFI depending on terminal configuration.
Built for reliability in harsh boiler room environments, the Fireye EP161 module monitors flame signals and manages fuel valves with tight tolerance. It is non-recycling (NR) upon flame failure during the run period, requiring a manual reset or power cycle to ensure the cause of failure is investigated. This burner controller module integrates seamlessly with existing Flame-Monitor chassis, utilizing on-board microprocessors to run self-diagnostics and provide clear status indications via the system display. When replacing legacy boiler controls, the EP161 ensures your combustion system meets modern safety standards while maintaining high operational uptime.
Key Benefits:
- Fixed 60-Second Pre-Purge: Ensures consistent safety protocols and compliance with combustion standards before every start-up.
- Flexible TFI Timing: Supports both 10-second and 30-second TFI intervals, allowing for precise adjustment based on specific fuel requirements.
- Non-Recycling Logic: Increases safety by preventing automatic restarts following a flame failure during the combustion cycle.
- LED Status Diagnostics: Facilitates rapid troubleshooting for field technicians by identifying lockout causes within the Fireye Flame-Monitor sequence.
- Rugged Plug-in Design: Minimizes downtime with a simple installation process that fits standard Fireye EB700 chassis.
Common Questions:
Can the purge timing be adjusted on the Fireye EP161?
No, the EP161 features a fixed 60-second purge cycle. If your application requires a shorter or longer purge duration, you must select the appropriate EP series module designed for that specific timing.
What does the 'NR' designation signify for this module?
The 'NR' stands for Non-Recycling. If a flame failure occurs during the main burner sequence, the module will lock out rather than attempting to restart the purge and ignition cycle automatically.
Which chassis is compatible with the Fireye EP161?
The EP161 is designed to be used with the Flame-Monitor EB700 series chassis. Ensure your wiring base and flame scanner (UV, infrared, or flame rod) are compatible with the integrated amplifier.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
