Fireye 72DUVS4 Amplifier
The Fireye 72DUVS4 is a UV self-check ultra-violet flame amplifier designed for use with the Flame-Monitor and MicroM systems, specifically engineered for continuous process applications. This module interfaces with UV1A, UV2, and UV8A scanners, utilizing a 2 to 4 second Flame Failure Response Time (FFRT) to ensure rapid shut-off during a flame-out event. The integrated Self-Check circuitry periodically simulates a flame failure by driving a mechanical shutter in the scanner, verifying the integrity of the sensing tube and electronics without interrupting the burner cycle. This solid-state amplifier provides localized diagnostic LEDs for instant troubleshooting of the flame signal status. Designed for industrial burner management systems, the 72DUVS4 maintains reliable flame supervision in environments requiring high-duty cycles and fail-safe operation. Its plug-in design allows for seamless integration into existing Flame-Monitor chassis, ensuring minimal downtime during field replacements or system upgrades.
- Continuous Self-Checking: Automatically verifies scanner and amplifier functionality every cycle to prevent unsafe startup or operation.
- Dynamic Signal Monitoring: Provides a steady flame signal pulse to the control programmer, ensuring precise combustion supervision.
- Optimized FFRT: The 2-4 second response window balances nuisance trip prevention with critical safety timing for industrial boilers.
- Rugged Solid-State Build: Built to withstand the thermal and electrical noise common in HVACR commercial mechanical rooms.
What scanners are compatible with the Fireye 72DUVS4?
This amplifier is designed to work with Fireye UV1A3, UV1A6, UV2, and UV8A non-self-check scanners. Note that while the amplifier performs a self-check routine, it requires the scanner to have a shutter mechanism if full continuous-duty supervision is required.
Can I use the 72DUVS4 to replace a 72D10 or 72DUV amplifier?
The 72DUVS4 is a direct upgrade for applications requiring Self-Check capabilities. However, ensure your Flame-Monitor chassis and scanner cabling support the shutter drive signals required for the self-check function to operate correctly.
How do I troubleshoot a low flame signal on this module?
Verify the sight pipe alignment and cleanliness of the UV scanner lens. Use a digital multimeter to check the flame signal voltage at the test points; a reading below 10VDC typically indicates a fouled scanner or an aging UV sensing tube.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $6,333.66
-65%$6,333.66
$2,216.78Fireye 72DUVS4 Amplifier
The Fireye 72DUVS4 is a UV self-check ultra-violet flame amplifier designed for use with the Flame-Monitor and MicroM systems, specifically engineered for continuous process applications. This module interfaces with UV1A, UV2, and UV8A scanners, utilizing a 2 to 4 second Flame Failure Response Time (FFRT) to ensure rapid shut-off during a flame-out event. The integrated Self-Check circuitry periodically simulates a flame failure by driving a mechanical shutter in the scanner, verifying the integrity of the sensing tube and electronics without interrupting the burner cycle. This solid-state amplifier provides localized diagnostic LEDs for instant troubleshooting of the flame signal status. Designed for industrial burner management systems, the 72DUVS4 maintains reliable flame supervision in environments requiring high-duty cycles and fail-safe operation. Its plug-in design allows for seamless integration into existing Flame-Monitor chassis, ensuring minimal downtime during field replacements or system upgrades.
- Continuous Self-Checking: Automatically verifies scanner and amplifier functionality every cycle to prevent unsafe startup or operation.
- Dynamic Signal Monitoring: Provides a steady flame signal pulse to the control programmer, ensuring precise combustion supervision.
- Optimized FFRT: The 2-4 second response window balances nuisance trip prevention with critical safety timing for industrial boilers.
- Rugged Solid-State Build: Built to withstand the thermal and electrical noise common in HVACR commercial mechanical rooms.
What scanners are compatible with the Fireye 72DUVS4?
This amplifier is designed to work with Fireye UV1A3, UV1A6, UV2, and UV8A non-self-check scanners. Note that while the amplifier performs a self-check routine, it requires the scanner to have a shutter mechanism if full continuous-duty supervision is required.
Can I use the 72DUVS4 to replace a 72D10 or 72DUV amplifier?
The 72DUVS4 is a direct upgrade for applications requiring Self-Check capabilities. However, ensure your Flame-Monitor chassis and scanner cabling support the shutter drive signals required for the self-check function to operate correctly.
How do I troubleshoot a low flame signal on this module?
Verify the sight pipe alignment and cleanliness of the UV scanner lens. Use a digital multimeter to check the flame signal voltage at the test points; a reading below 10VDC typically indicates a fouled scanner or an aging UV sensing tube.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fireye 72DUVS4 is a UV self-check ultra-violet flame amplifier designed for use with the Flame-Monitor and MicroM systems, specifically engineered for continuous process applications. This module interfaces with UV1A, UV2, and UV8A scanners, utilizing a 2 to 4 second Flame Failure Response Time (FFRT) to ensure rapid shut-off during a flame-out event. The integrated Self-Check circuitry periodically simulates a flame failure by driving a mechanical shutter in the scanner, verifying the integrity of the sensing tube and electronics without interrupting the burner cycle. This solid-state amplifier provides localized diagnostic LEDs for instant troubleshooting of the flame signal status. Designed for industrial burner management systems, the 72DUVS4 maintains reliable flame supervision in environments requiring high-duty cycles and fail-safe operation. Its plug-in design allows for seamless integration into existing Flame-Monitor chassis, ensuring minimal downtime during field replacements or system upgrades.
- Continuous Self-Checking: Automatically verifies scanner and amplifier functionality every cycle to prevent unsafe startup or operation.
- Dynamic Signal Monitoring: Provides a steady flame signal pulse to the control programmer, ensuring precise combustion supervision.
- Optimized FFRT: The 2-4 second response window balances nuisance trip prevention with critical safety timing for industrial boilers.
- Rugged Solid-State Build: Built to withstand the thermal and electrical noise common in HVACR commercial mechanical rooms.
What scanners are compatible with the Fireye 72DUVS4?
This amplifier is designed to work with Fireye UV1A3, UV1A6, UV2, and UV8A non-self-check scanners. Note that while the amplifier performs a self-check routine, it requires the scanner to have a shutter mechanism if full continuous-duty supervision is required.
Can I use the 72DUVS4 to replace a 72D10 or 72DUV amplifier?
The 72DUVS4 is a direct upgrade for applications requiring Self-Check capabilities. However, ensure your Flame-Monitor chassis and scanner cabling support the shutter drive signals required for the self-check function to operate correctly.
How do I troubleshoot a low flame signal on this module?
Verify the sight pipe alignment and cleanliness of the UV scanner lens. Use a digital multimeter to check the flame signal voltage at the test points; a reading below 10VDC typically indicates a fouled scanner or an aging UV sensing tube.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
