Warrick 3R1A0 Liquid Level Accessory
The Warrick 3R1A0 is a professional-grade liquid level accessory designed for reliable conductivity-based sensing in industrial and commercial applications. This 12-inch brass probe rod features a standard 1/4" threaded connection, ensuring a secure and precise fit with Series 3E, 3F, 3G, and 3B fittings. As a primary sensing element for conductivity liquid level controls, the 3R1A0 facilitates accurate point-level detection in non-corrosive liquids, specifically where high-quality brass is required for electrical conductivity and structural integrity. For technicians performing liquid level probe replacement or initial system assembly, this rod provides the necessary vertical extension to reach prescribed setpoints within the vessel. The 3R series brass electrode is commonly utilized in hot water systems and general-purpose tank monitoring due to its consistent performance and ease of field-trimming to meet specific depth requirements. When integrating this Warrick probe rod into an existing Gems Sensors & Controls setup, ensure that the threaded interface is properly seated within the fitting to maintain circuit continuity and prevent false resets or signal loss.
Key Benefits- Universal Compatibility: Engineered for seamless integration with Series 3E, 3F, 3G, and 3B sensor fittings, allowing for versatile field applications.
- Optimized Conductivity: High-grade brass construction ensures a reliable electrical path for liquid level control relays to detect fluid presence without latency.
- Field-Adjustable Length: The 1-foot 3R1A0 probe can be trimmed or coupled with additional rods for precise low water cutoff or sump pump activation heights.
- Durable Threaded Connection: Features a robust 1/4" threaded end designed to withstand the vibrations and thermal cycling typical in HVACR liquid level monitoring.
Is the Warrick 3R1A0 compatible with corrosive chemicals?
While brass is effective for general-purpose liquid level sensing in water or neutral fluids, it is typically not recommended for acidic or highly corrosive environments. For those applications, we recommend 316 Stainless Steel or specialized alloy probes.
What is the maximum temperature rating for this brass probe?
The 3R1A0 rod itself is designed to handle high-temperature industrial environments; however, the overall temperature limit of your liquid level control system is usually determined by the pressure-tight rating of the specific Warrick fitting (e.g., Series 3E or 3B) used during installation.
How do I ensure a proper seal when installing the 1/4" threaded rod?
For most conductivity probes, the rod should be threaded firmly into the fitting's internal contact. If used in a pressure-tight assembly, ensure the insulator and gaskets of the master fitting are in good condition to prevent moisture wicking, which can cause relay over-sensing issues.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $55.20
-65%$55.20
$19.32Warrick 3R1A0 Liquid Level Accessory
The Warrick 3R1A0 is a professional-grade liquid level accessory designed for reliable conductivity-based sensing in industrial and commercial applications. This 12-inch brass probe rod features a standard 1/4" threaded connection, ensuring a secure and precise fit with Series 3E, 3F, 3G, and 3B fittings. As a primary sensing element for conductivity liquid level controls, the 3R1A0 facilitates accurate point-level detection in non-corrosive liquids, specifically where high-quality brass is required for electrical conductivity and structural integrity. For technicians performing liquid level probe replacement or initial system assembly, this rod provides the necessary vertical extension to reach prescribed setpoints within the vessel. The 3R series brass electrode is commonly utilized in hot water systems and general-purpose tank monitoring due to its consistent performance and ease of field-trimming to meet specific depth requirements. When integrating this Warrick probe rod into an existing Gems Sensors & Controls setup, ensure that the threaded interface is properly seated within the fitting to maintain circuit continuity and prevent false resets or signal loss.
Key Benefits- Universal Compatibility: Engineered for seamless integration with Series 3E, 3F, 3G, and 3B sensor fittings, allowing for versatile field applications.
- Optimized Conductivity: High-grade brass construction ensures a reliable electrical path for liquid level control relays to detect fluid presence without latency.
- Field-Adjustable Length: The 1-foot 3R1A0 probe can be trimmed or coupled with additional rods for precise low water cutoff or sump pump activation heights.
- Durable Threaded Connection: Features a robust 1/4" threaded end designed to withstand the vibrations and thermal cycling typical in HVACR liquid level monitoring.
Is the Warrick 3R1A0 compatible with corrosive chemicals?
While brass is effective for general-purpose liquid level sensing in water or neutral fluids, it is typically not recommended for acidic or highly corrosive environments. For those applications, we recommend 316 Stainless Steel or specialized alloy probes.
What is the maximum temperature rating for this brass probe?
The 3R1A0 rod itself is designed to handle high-temperature industrial environments; however, the overall temperature limit of your liquid level control system is usually determined by the pressure-tight rating of the specific Warrick fitting (e.g., Series 3E or 3B) used during installation.
How do I ensure a proper seal when installing the 1/4" threaded rod?
For most conductivity probes, the rod should be threaded firmly into the fitting's internal contact. If used in a pressure-tight assembly, ensure the insulator and gaskets of the master fitting are in good condition to prevent moisture wicking, which can cause relay over-sensing issues.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Warrick 3R1A0 is a professional-grade liquid level accessory designed for reliable conductivity-based sensing in industrial and commercial applications. This 12-inch brass probe rod features a standard 1/4" threaded connection, ensuring a secure and precise fit with Series 3E, 3F, 3G, and 3B fittings. As a primary sensing element for conductivity liquid level controls, the 3R1A0 facilitates accurate point-level detection in non-corrosive liquids, specifically where high-quality brass is required for electrical conductivity and structural integrity. For technicians performing liquid level probe replacement or initial system assembly, this rod provides the necessary vertical extension to reach prescribed setpoints within the vessel. The 3R series brass electrode is commonly utilized in hot water systems and general-purpose tank monitoring due to its consistent performance and ease of field-trimming to meet specific depth requirements. When integrating this Warrick probe rod into an existing Gems Sensors & Controls setup, ensure that the threaded interface is properly seated within the fitting to maintain circuit continuity and prevent false resets or signal loss.
Key Benefits- Universal Compatibility: Engineered for seamless integration with Series 3E, 3F, 3G, and 3B sensor fittings, allowing for versatile field applications.
- Optimized Conductivity: High-grade brass construction ensures a reliable electrical path for liquid level control relays to detect fluid presence without latency.
- Field-Adjustable Length: The 1-foot 3R1A0 probe can be trimmed or coupled with additional rods for precise low water cutoff or sump pump activation heights.
- Durable Threaded Connection: Features a robust 1/4" threaded end designed to withstand the vibrations and thermal cycling typical in HVACR liquid level monitoring.
Is the Warrick 3R1A0 compatible with corrosive chemicals?
While brass is effective for general-purpose liquid level sensing in water or neutral fluids, it is typically not recommended for acidic or highly corrosive environments. For those applications, we recommend 316 Stainless Steel or specialized alloy probes.
What is the maximum temperature rating for this brass probe?
The 3R1A0 rod itself is designed to handle high-temperature industrial environments; however, the overall temperature limit of your liquid level control system is usually determined by the pressure-tight rating of the specific Warrick fitting (e.g., Series 3E or 3B) used during installation.
How do I ensure a proper seal when installing the 1/4" threaded rod?
For most conductivity probes, the rod should be threaded firmly into the fitting's internal contact. If used in a pressure-tight assembly, ensure the insulator and gaskets of the master fitting are in good condition to prevent moisture wicking, which can cause relay over-sensing issues.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
