Warrick DFL1B0K Control
The Warrick DFL1B0K is a field-proven dual function conductivity level control designed for heavy-duty HVACR and industrial liquid management. Operating on 120V AC, this open-board module provides precise liquid level monitoring for two independent functions: a single-level limit and a differential-level control. Engineered with 10K Ohm sensitivity, the DFL1B0K is ideal for boilers, steam generators, and chemical delivery systems where reliable conductivity sensing is mandatory. This specific configuration features integrated manual reset and power outage protection, ensuring the system remains deactivated after a low-water event or nuisance power loss until manual intervention occurs. The 1/8" panel mount design and spade terminal connections facilitate straightforward installation in tight control cabinets. By utilizing a secondary circuit with 2.3 VAC on the probes, this Warrick DFL1B0K control minimizes electrolysis and electrode scaling, extending the service life of your conductivity probes and ensuring consistent performance in demanding environments.
Key Benefits for the Contractor- Dual-Function Versatility: Manages both high-level alarm and low-water cutoff (LWCO) requirements within a single, compact footprint.
- Enhanced System Safety: The manual reset function meets CSD-1 requirements for boiler limit controls, preventing automatic restarts in unsafe conditions.
- Power Outage Reliability: Remembers its state during voltage drops, eliminating operational inconsistencies during intermittent power cycles.
- Solid-State Durability: No moving parts besides the heavy-duty 10A resistive SPDT relay, significantly reducing mechanical failure points.
- Simplified Integration: Features standard spade terminals and an open-board layout for quick wiring and maintenance access.
How do I wire the Warrick DFL1B0K for pump-down operations?
To configure for pump-down, use the inverse mode setting to ensure the output relay de-energizes when the liquid drops below the lower electrode. Always verify your probe wiring against the specific Gems Sensors Warrick diagram for your application's sensitivity needs.
Can this control be used with non-conductive liquids?
No, this is a conductivity-based liquid level control. It requires the media to be conductive (e.g., water, acids, or specialized chemicals) to complete the electrical path between the electrodes and the 10K Ohm sensing circuit.
What is the purpose of the 10K Ohm sensitivity rating?
The 10K Ohm sensitivity is factory-set to match the resistance of standard tap water and many common industrial fluids, providing a stable signal while preventing false "ghost" triggers caused by moisture or foam on the probes.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $462.39
-65%$462.39
$161.84Warrick DFL1B0K Control
The Warrick DFL1B0K is a field-proven dual function conductivity level control designed for heavy-duty HVACR and industrial liquid management. Operating on 120V AC, this open-board module provides precise liquid level monitoring for two independent functions: a single-level limit and a differential-level control. Engineered with 10K Ohm sensitivity, the DFL1B0K is ideal for boilers, steam generators, and chemical delivery systems where reliable conductivity sensing is mandatory. This specific configuration features integrated manual reset and power outage protection, ensuring the system remains deactivated after a low-water event or nuisance power loss until manual intervention occurs. The 1/8" panel mount design and spade terminal connections facilitate straightforward installation in tight control cabinets. By utilizing a secondary circuit with 2.3 VAC on the probes, this Warrick DFL1B0K control minimizes electrolysis and electrode scaling, extending the service life of your conductivity probes and ensuring consistent performance in demanding environments.
Key Benefits for the Contractor- Dual-Function Versatility: Manages both high-level alarm and low-water cutoff (LWCO) requirements within a single, compact footprint.
- Enhanced System Safety: The manual reset function meets CSD-1 requirements for boiler limit controls, preventing automatic restarts in unsafe conditions.
- Power Outage Reliability: Remembers its state during voltage drops, eliminating operational inconsistencies during intermittent power cycles.
- Solid-State Durability: No moving parts besides the heavy-duty 10A resistive SPDT relay, significantly reducing mechanical failure points.
- Simplified Integration: Features standard spade terminals and an open-board layout for quick wiring and maintenance access.
How do I wire the Warrick DFL1B0K for pump-down operations?
To configure for pump-down, use the inverse mode setting to ensure the output relay de-energizes when the liquid drops below the lower electrode. Always verify your probe wiring against the specific Gems Sensors Warrick diagram for your application's sensitivity needs.
Can this control be used with non-conductive liquids?
No, this is a conductivity-based liquid level control. It requires the media to be conductive (e.g., water, acids, or specialized chemicals) to complete the electrical path between the electrodes and the 10K Ohm sensing circuit.
What is the purpose of the 10K Ohm sensitivity rating?
The 10K Ohm sensitivity is factory-set to match the resistance of standard tap water and many common industrial fluids, providing a stable signal while preventing false "ghost" triggers caused by moisture or foam on the probes.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Warrick DFL1B0K is a field-proven dual function conductivity level control designed for heavy-duty HVACR and industrial liquid management. Operating on 120V AC, this open-board module provides precise liquid level monitoring for two independent functions: a single-level limit and a differential-level control. Engineered with 10K Ohm sensitivity, the DFL1B0K is ideal for boilers, steam generators, and chemical delivery systems where reliable conductivity sensing is mandatory. This specific configuration features integrated manual reset and power outage protection, ensuring the system remains deactivated after a low-water event or nuisance power loss until manual intervention occurs. The 1/8" panel mount design and spade terminal connections facilitate straightforward installation in tight control cabinets. By utilizing a secondary circuit with 2.3 VAC on the probes, this Warrick DFL1B0K control minimizes electrolysis and electrode scaling, extending the service life of your conductivity probes and ensuring consistent performance in demanding environments.
Key Benefits for the Contractor- Dual-Function Versatility: Manages both high-level alarm and low-water cutoff (LWCO) requirements within a single, compact footprint.
- Enhanced System Safety: The manual reset function meets CSD-1 requirements for boiler limit controls, preventing automatic restarts in unsafe conditions.
- Power Outage Reliability: Remembers its state during voltage drops, eliminating operational inconsistencies during intermittent power cycles.
- Solid-State Durability: No moving parts besides the heavy-duty 10A resistive SPDT relay, significantly reducing mechanical failure points.
- Simplified Integration: Features standard spade terminals and an open-board layout for quick wiring and maintenance access.
How do I wire the Warrick DFL1B0K for pump-down operations?
To configure for pump-down, use the inverse mode setting to ensure the output relay de-energizes when the liquid drops below the lower electrode. Always verify your probe wiring against the specific Gems Sensors Warrick diagram for your application's sensitivity needs.
Can this control be used with non-conductive liquids?
No, this is a conductivity-based liquid level control. It requires the media to be conductive (e.g., water, acids, or specialized chemicals) to complete the electrical path between the electrodes and the 10K Ohm sensing circuit.
What is the purpose of the 10K Ohm sensitivity rating?
The 10K Ohm sensitivity is factory-set to match the resistance of standard tap water and many common industrial fluids, providing a stable signal while preventing false "ghost" triggers caused by moisture or foam on the probes.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
