Warrick 3H1C1 Sensor Probe
For high-performance liquid level control, the Warrick 3H1C1 Sensor Probe is the professional choice for contractors managing steam boilers, sumps, and hydronic systems. This single-level conductivity sensor features a robust 316 stainless steel body and 1/4" diameter rod, ensuring long-term resistance to corrosion in demanding HVACR environments. Engineered for versatility, the 1-foot probe is rated for high-pressure/high-temperature applications up to 250 psig at 406°F, making it a reliable component for both commercial and industrial process water systems.
The Series 3H electrode fitting utilizes a 3/8"-18 NPT mounting thread for precise integration into existing vessels. As a veteran-grade conductivity probe, the 3H1C1 provides a secure, pressure-tight seal that prevents vapor leakage and moisture intrusion, which are common causes of over-sensing and false relay trips. The Teflon insulation and 3/4" nylon sleeve ensure clean signal isolation, allowing your liquid level control relay to maintain accurate sensitivity even in fluids with varying conductivity levels. This OEM-spec probe is built for quick installation and can be trimmed in the field to meet specific tank depth requirements.
Key Benefits- Corrosion Resistance: Built with 316 stainless steel alloy for superior durability in caustic or high-purity water applications.
- High-Temperature Rating: Optimized for steam boilers and sterilizers with a 406°F maximum operating temperature.
- Field Adjustable: The 1-foot rod can be trimmed to exact specifications, providing custom liquid level sensing for specific tank depths.
- Pressure-Tight Seal: Designed to withstand 250 psig, eliminating the risk of bypass leaks in pressurized vessels.
- Low Maintenance: The Teflon-insulated sleeve resists mineral buildup and scale, reducing the need for frequent probe cleaning.
What causes a Warrick probe to give false readings?
False "liquid present" signals are often caused by "bridging," where moisture or mineral deposits create a conductive path between the probe and the tank wall. Ensure the Teflon insulation is clean and specify your controller’s sensitivity to match the liquid's conductivity.
Can I use the 3H1C1 as a reference ground?
Yes. While the tank wall is often used, installing a separate Warrick 3H1C1 as a dedicated ground probe is recommended in non-metallic tanks or coated vessels to ensure a consistent electrical path for the relay.
Is this probe compatible with older Series 1 or 2 relays?
This probe is compatible with most conductivity-based relays; however, when replacing electrodes in a system with legacy high-voltage relays, verify that all probes in the same tank are capable of handling the signal voltage to avoid interference.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $195.50
-65%$195.50
$68.42Warrick 3H1C1 Sensor Probe
For high-performance liquid level control, the Warrick 3H1C1 Sensor Probe is the professional choice for contractors managing steam boilers, sumps, and hydronic systems. This single-level conductivity sensor features a robust 316 stainless steel body and 1/4" diameter rod, ensuring long-term resistance to corrosion in demanding HVACR environments. Engineered for versatility, the 1-foot probe is rated for high-pressure/high-temperature applications up to 250 psig at 406°F, making it a reliable component for both commercial and industrial process water systems.
The Series 3H electrode fitting utilizes a 3/8"-18 NPT mounting thread for precise integration into existing vessels. As a veteran-grade conductivity probe, the 3H1C1 provides a secure, pressure-tight seal that prevents vapor leakage and moisture intrusion, which are common causes of over-sensing and false relay trips. The Teflon insulation and 3/4" nylon sleeve ensure clean signal isolation, allowing your liquid level control relay to maintain accurate sensitivity even in fluids with varying conductivity levels. This OEM-spec probe is built for quick installation and can be trimmed in the field to meet specific tank depth requirements.
Key Benefits- Corrosion Resistance: Built with 316 stainless steel alloy for superior durability in caustic or high-purity water applications.
- High-Temperature Rating: Optimized for steam boilers and sterilizers with a 406°F maximum operating temperature.
- Field Adjustable: The 1-foot rod can be trimmed to exact specifications, providing custom liquid level sensing for specific tank depths.
- Pressure-Tight Seal: Designed to withstand 250 psig, eliminating the risk of bypass leaks in pressurized vessels.
- Low Maintenance: The Teflon-insulated sleeve resists mineral buildup and scale, reducing the need for frequent probe cleaning.
What causes a Warrick probe to give false readings?
False "liquid present" signals are often caused by "bridging," where moisture or mineral deposits create a conductive path between the probe and the tank wall. Ensure the Teflon insulation is clean and specify your controller’s sensitivity to match the liquid's conductivity.
Can I use the 3H1C1 as a reference ground?
Yes. While the tank wall is often used, installing a separate Warrick 3H1C1 as a dedicated ground probe is recommended in non-metallic tanks or coated vessels to ensure a consistent electrical path for the relay.
Is this probe compatible with older Series 1 or 2 relays?
This probe is compatible with most conductivity-based relays; however, when replacing electrodes in a system with legacy high-voltage relays, verify that all probes in the same tank are capable of handling the signal voltage to avoid interference.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For high-performance liquid level control, the Warrick 3H1C1 Sensor Probe is the professional choice for contractors managing steam boilers, sumps, and hydronic systems. This single-level conductivity sensor features a robust 316 stainless steel body and 1/4" diameter rod, ensuring long-term resistance to corrosion in demanding HVACR environments. Engineered for versatility, the 1-foot probe is rated for high-pressure/high-temperature applications up to 250 psig at 406°F, making it a reliable component for both commercial and industrial process water systems.
The Series 3H electrode fitting utilizes a 3/8"-18 NPT mounting thread for precise integration into existing vessels. As a veteran-grade conductivity probe, the 3H1C1 provides a secure, pressure-tight seal that prevents vapor leakage and moisture intrusion, which are common causes of over-sensing and false relay trips. The Teflon insulation and 3/4" nylon sleeve ensure clean signal isolation, allowing your liquid level control relay to maintain accurate sensitivity even in fluids with varying conductivity levels. This OEM-spec probe is built for quick installation and can be trimmed in the field to meet specific tank depth requirements.
Key Benefits- Corrosion Resistance: Built with 316 stainless steel alloy for superior durability in caustic or high-purity water applications.
- High-Temperature Rating: Optimized for steam boilers and sterilizers with a 406°F maximum operating temperature.
- Field Adjustable: The 1-foot rod can be trimmed to exact specifications, providing custom liquid level sensing for specific tank depths.
- Pressure-Tight Seal: Designed to withstand 250 psig, eliminating the risk of bypass leaks in pressurized vessels.
- Low Maintenance: The Teflon-insulated sleeve resists mineral buildup and scale, reducing the need for frequent probe cleaning.
What causes a Warrick probe to give false readings?
False "liquid present" signals are often caused by "bridging," where moisture or mineral deposits create a conductive path between the probe and the tank wall. Ensure the Teflon insulation is clean and specify your controller’s sensitivity to match the liquid's conductivity.
Can I use the 3H1C1 as a reference ground?
Yes. While the tank wall is often used, installing a separate Warrick 3H1C1 as a dedicated ground probe is recommended in non-metallic tanks or coated vessels to ensure a consistent electrical path for the relay.
Is this probe compatible with older Series 1 or 2 relays?
This probe is compatible with most conductivity-based relays; however, when replacing electrodes in a system with legacy high-voltage relays, verify that all probes in the same tank are capable of handling the signal voltage to avoid interference.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
