Warrick 26C1B0Z Control
The Warrick 26C1B0Z is a rugged, open-board liquid level control designed specifically for boiler low water cutoff and pump-up/pump-down applications. Operating on a 120Vac supply voltage, this conductive level sensor utilizes a 26,000-ohm sensitivity for direct acting operation, ensuring precise relay activation when liquid contacts the probe. The SPDT relay configuration provides versatile signaling for both normally open and normally closed circuits, while the 1/8" panel standoff mounting allows for seamless integration into existing control cabinets. To prevent nuisance tripping caused by turbulent liquid surfaces, the board features a built-in 3-second time delay. This model is engineered for reliability, incorporating a manual reset that remains locked even through power outages, alongside a dedicated test feature to verify circuit integrity during routine maintenance. The use of 1/4" spade terminals simplifies field wiring for rapid installation in demanding commercial environments.
Key Benefits- Redundant Safety Logic: The manual reset with power outage feature ensures the system remains in a safe state until manually cleared by a technician.
- Stability in Turbulent Conditions: The 3-second time delay relay prevents rapid cycling, extending the lifespan of connected pumps and contactors.
- Compact Integration: Its open board design and standoff mounting make it an ideal drop-in replacement for tight control panels.
- Reliable Sensing: 26k ohm sensitivity is optimized for standard water applications, providing consistent conductive level control.
How does the manual reset function during a power failure?
The Warrick 26C1B0Z is designed to "remember" its tripped state. If a low-water condition occurs and power is subsequently lost, the control remains locked in the manual reset state once power is restored, requiring physical intervention to resume operation.
Can this board be used for high-temperature steam applications?
Yes, when paired with appropriate Warrick probes and sensors, this low water cutoff control board is standard for steam boiler monitoring where 120Vac logic is required.
What is the purpose of the test feature?
The onboard test button allows contractors to simulate a low-water condition, verifying that the SPDT relay properly interrupts the burner or pump circuit without needing to drain the entire system.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $341.48
-65%$341.48
$119.52Warrick 26C1B0Z Control
The Warrick 26C1B0Z is a rugged, open-board liquid level control designed specifically for boiler low water cutoff and pump-up/pump-down applications. Operating on a 120Vac supply voltage, this conductive level sensor utilizes a 26,000-ohm sensitivity for direct acting operation, ensuring precise relay activation when liquid contacts the probe. The SPDT relay configuration provides versatile signaling for both normally open and normally closed circuits, while the 1/8" panel standoff mounting allows for seamless integration into existing control cabinets. To prevent nuisance tripping caused by turbulent liquid surfaces, the board features a built-in 3-second time delay. This model is engineered for reliability, incorporating a manual reset that remains locked even through power outages, alongside a dedicated test feature to verify circuit integrity during routine maintenance. The use of 1/4" spade terminals simplifies field wiring for rapid installation in demanding commercial environments.
Key Benefits- Redundant Safety Logic: The manual reset with power outage feature ensures the system remains in a safe state until manually cleared by a technician.
- Stability in Turbulent Conditions: The 3-second time delay relay prevents rapid cycling, extending the lifespan of connected pumps and contactors.
- Compact Integration: Its open board design and standoff mounting make it an ideal drop-in replacement for tight control panels.
- Reliable Sensing: 26k ohm sensitivity is optimized for standard water applications, providing consistent conductive level control.
How does the manual reset function during a power failure?
The Warrick 26C1B0Z is designed to "remember" its tripped state. If a low-water condition occurs and power is subsequently lost, the control remains locked in the manual reset state once power is restored, requiring physical intervention to resume operation.
Can this board be used for high-temperature steam applications?
Yes, when paired with appropriate Warrick probes and sensors, this low water cutoff control board is standard for steam boiler monitoring where 120Vac logic is required.
What is the purpose of the test feature?
The onboard test button allows contractors to simulate a low-water condition, verifying that the SPDT relay properly interrupts the burner or pump circuit without needing to drain the entire system.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Warrick 26C1B0Z is a rugged, open-board liquid level control designed specifically for boiler low water cutoff and pump-up/pump-down applications. Operating on a 120Vac supply voltage, this conductive level sensor utilizes a 26,000-ohm sensitivity for direct acting operation, ensuring precise relay activation when liquid contacts the probe. The SPDT relay configuration provides versatile signaling for both normally open and normally closed circuits, while the 1/8" panel standoff mounting allows for seamless integration into existing control cabinets. To prevent nuisance tripping caused by turbulent liquid surfaces, the board features a built-in 3-second time delay. This model is engineered for reliability, incorporating a manual reset that remains locked even through power outages, alongside a dedicated test feature to verify circuit integrity during routine maintenance. The use of 1/4" spade terminals simplifies field wiring for rapid installation in demanding commercial environments.
Key Benefits- Redundant Safety Logic: The manual reset with power outage feature ensures the system remains in a safe state until manually cleared by a technician.
- Stability in Turbulent Conditions: The 3-second time delay relay prevents rapid cycling, extending the lifespan of connected pumps and contactors.
- Compact Integration: Its open board design and standoff mounting make it an ideal drop-in replacement for tight control panels.
- Reliable Sensing: 26k ohm sensitivity is optimized for standard water applications, providing consistent conductive level control.
How does the manual reset function during a power failure?
The Warrick 26C1B0Z is designed to "remember" its tripped state. If a low-water condition occurs and power is subsequently lost, the control remains locked in the manual reset state once power is restored, requiring physical intervention to resume operation.
Can this board be used for high-temperature steam applications?
Yes, when paired with appropriate Warrick probes and sensors, this low water cutoff control board is standard for steam boiler monitoring where 120Vac logic is required.
What is the purpose of the test feature?
The onboard test button allows contractors to simulate a low-water condition, verifying that the SPDT relay properly interrupts the burner or pump circuit without needing to drain the entire system.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
