Warrick 26C1A0E Control
The Warrick 26C1A0E Control is a specialized low water cutoff (LWCO) solution designed for critical boiler protection and liquid level monitoring. Operating on 120VAC, this conductivity-based liquid level control features a 26,000-ohm sensitivity, making it ideal for systems requiring a direct acting mode of operation. As an open-board design with a 1/16-inch panel standoff, it is built for easy integration into existing enclosures where space and precise mounting are essential. This unit comes standard with spade terminals for rapid field wiring and secure connections, essential for high-duty cycle industrial environments.
For enhanced system safety, the Warrick 26C1A0E includes a built-in 3-second time delay to prevent nuisance trippings caused by turbulence or surging. The manual reset with power outage feature ensures the system remains deactivated following a low-water condition, even if power is cycled, necessitating a physical intervention to resume operation once safe levels are restored. With its SPDT (1 NO/1 NC) relay, this control manages secondary circuits with technical precision, ensuring boiler safety compliance and reliable pump or alarm activation across varied HVACR platforms.
Key Benefits for Contractors- System Reliability: The 26,000 ohm sensitivity provides steady performance in standard water applications, preventing false dry-run signals.
- Fail-Safe Operation: Integrated manual reset logic ensures that equipment cannot automatically restart until water levels are verified by a technician.
- Streamlined Installation: Designed with a 1/16-inch panel standoff style and spade connectors for a clean, professional fit in compact control cabinets.
- Protection Against Surges: A 3-second time delay filters out momentary level fluctuations, extending the life of your contactors and burners.
- Versatile Signaling: The SPDT relay allows for simultaneous control of a primary load and a remote status alarm.
How does the power outage feature impact the manual reset?
Unlike standard controllers that might reset automatically after a power flicker, the Warrick 26C1A0E is engineered to remember its state. If a low-water trip occurs, restoring power will not bypass the safety lockout; the manual reset must still be engaged, ensuring the root cause is addressed before the boiler fires.
Can this board be used for high-temperature applications?
Yes, this low water cutoff control board is rated for ambient temperatures ranging from -40°F to 150°F, making it suitable for standard mechanical room environments and proximity to steam-generating equipment.
What is the purpose of the 26,000 ohm sensitivity rating?
The 26K ohm rating is the threshold at which the conductivity-based control detects the presence of liquid. This specific sensitivity is calibrated for standard tap water and condensate, ensuring the direct acting relay responds accurately to level changes without being overly sensitive to slight probe scaling.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $337.67
-65%$337.67
$118.18Warrick 26C1A0E Control
The Warrick 26C1A0E Control is a specialized low water cutoff (LWCO) solution designed for critical boiler protection and liquid level monitoring. Operating on 120VAC, this conductivity-based liquid level control features a 26,000-ohm sensitivity, making it ideal for systems requiring a direct acting mode of operation. As an open-board design with a 1/16-inch panel standoff, it is built for easy integration into existing enclosures where space and precise mounting are essential. This unit comes standard with spade terminals for rapid field wiring and secure connections, essential for high-duty cycle industrial environments.
For enhanced system safety, the Warrick 26C1A0E includes a built-in 3-second time delay to prevent nuisance trippings caused by turbulence or surging. The manual reset with power outage feature ensures the system remains deactivated following a low-water condition, even if power is cycled, necessitating a physical intervention to resume operation once safe levels are restored. With its SPDT (1 NO/1 NC) relay, this control manages secondary circuits with technical precision, ensuring boiler safety compliance and reliable pump or alarm activation across varied HVACR platforms.
Key Benefits for Contractors- System Reliability: The 26,000 ohm sensitivity provides steady performance in standard water applications, preventing false dry-run signals.
- Fail-Safe Operation: Integrated manual reset logic ensures that equipment cannot automatically restart until water levels are verified by a technician.
- Streamlined Installation: Designed with a 1/16-inch panel standoff style and spade connectors for a clean, professional fit in compact control cabinets.
- Protection Against Surges: A 3-second time delay filters out momentary level fluctuations, extending the life of your contactors and burners.
- Versatile Signaling: The SPDT relay allows for simultaneous control of a primary load and a remote status alarm.
How does the power outage feature impact the manual reset?
Unlike standard controllers that might reset automatically after a power flicker, the Warrick 26C1A0E is engineered to remember its state. If a low-water trip occurs, restoring power will not bypass the safety lockout; the manual reset must still be engaged, ensuring the root cause is addressed before the boiler fires.
Can this board be used for high-temperature applications?
Yes, this low water cutoff control board is rated for ambient temperatures ranging from -40°F to 150°F, making it suitable for standard mechanical room environments and proximity to steam-generating equipment.
What is the purpose of the 26,000 ohm sensitivity rating?
The 26K ohm rating is the threshold at which the conductivity-based control detects the presence of liquid. This specific sensitivity is calibrated for standard tap water and condensate, ensuring the direct acting relay responds accurately to level changes without being overly sensitive to slight probe scaling.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Warrick 26C1A0E Control is a specialized low water cutoff (LWCO) solution designed for critical boiler protection and liquid level monitoring. Operating on 120VAC, this conductivity-based liquid level control features a 26,000-ohm sensitivity, making it ideal for systems requiring a direct acting mode of operation. As an open-board design with a 1/16-inch panel standoff, it is built for easy integration into existing enclosures where space and precise mounting are essential. This unit comes standard with spade terminals for rapid field wiring and secure connections, essential for high-duty cycle industrial environments.
For enhanced system safety, the Warrick 26C1A0E includes a built-in 3-second time delay to prevent nuisance trippings caused by turbulence or surging. The manual reset with power outage feature ensures the system remains deactivated following a low-water condition, even if power is cycled, necessitating a physical intervention to resume operation once safe levels are restored. With its SPDT (1 NO/1 NC) relay, this control manages secondary circuits with technical precision, ensuring boiler safety compliance and reliable pump or alarm activation across varied HVACR platforms.
Key Benefits for Contractors- System Reliability: The 26,000 ohm sensitivity provides steady performance in standard water applications, preventing false dry-run signals.
- Fail-Safe Operation: Integrated manual reset logic ensures that equipment cannot automatically restart until water levels are verified by a technician.
- Streamlined Installation: Designed with a 1/16-inch panel standoff style and spade connectors for a clean, professional fit in compact control cabinets.
- Protection Against Surges: A 3-second time delay filters out momentary level fluctuations, extending the life of your contactors and burners.
- Versatile Signaling: The SPDT relay allows for simultaneous control of a primary load and a remote status alarm.
How does the power outage feature impact the manual reset?
Unlike standard controllers that might reset automatically after a power flicker, the Warrick 26C1A0E is engineered to remember its state. If a low-water trip occurs, restoring power will not bypass the safety lockout; the manual reset must still be engaged, ensuring the root cause is addressed before the boiler fires.
Can this board be used for high-temperature applications?
Yes, this low water cutoff control board is rated for ambient temperatures ranging from -40°F to 150°F, making it suitable for standard mechanical room environments and proximity to steam-generating equipment.
What is the purpose of the 26,000 ohm sensitivity rating?
The 26K ohm rating is the threshold at which the conductivity-based control detects the presence of liquid. This specific sensitivity is calibrated for standard tap water and condensate, ensuring the direct acting relay responds accurately to level changes without being overly sensitive to slight probe scaling.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
