Velocity Boiler Works (Crown) 233031 Ignitor With Gasket
For high-efficiency ignition in Velocity Boiler Works BWC series condensing boilers, the Velocity Boiler Works (Crown) 233031 Ignitor With Gasket is the specified OEM boiler replacement part for ensuring reliable spark in a sealed combustion environment. This kit, often identified by technicians as the Velocity Boiler 233031 igniter kit, includes the primary 240010 electrode, a high-temperature 240011 electrode gasket, and two M4 hex nuts for precise torque and alignment. This assembly is critical for Crown BWC070, BWC150, and BWC151 models, providing the consistent arc necessary for optimal fuel-to-air combustion. The pre-installed gasket is engineered from durable nitrile/EPDM and rated for temperatures between 1000°F and 1200°F, preventing dangerous flue gas leakage and maintaining the pressure integrity of the heat exchanger assembly. Using a genuine Velocity Boiler Works ignitor guarantees correct flame sensing and ignition cycles, reducing common issues like short cycling or ignition failure codes in residential and commercial hydronic systems.
Key Benefits for Technicians
- Exact Compatibility: Precision-fit for Velocity Boiler Works BWC series, specifically models BWC070, BWC150, and BWC151.
- Sealed Combustion Security: Includes a 240011 electrode gasket to ensure a gas-tight seal against the burner plate.
- Durable OEM Build: Robust electrode construction withstands the high-temperature environment of commercial and residential condensing boilers.
- Rapid Replacement: Kit includes all necessary fasteners (M4 hex nuts) for a clean swap during emergency service calls.
- Reliable Ignition: Engineered to provide stable arc performance, minimizing downtime caused by ignition lockout.
Common Questions
Which boiler models use the 233031 ignitor?
This ignitor kit is designed specifically for Velocity Boiler Works (formerly Crown Boiler) BWC series condensing boilers, including technical applications for the Crown BWC070, BWC150, and BWC151 systems.
What is the typical resistance or voltage for this ignitor?
This component operates within a wide voltage range of 24V to 240V depending on the control board signal. When diagnosing with a multimeter, ensure the power is off and check for continuity; a cracked ceramic insulator or fouled electrode tip are common indicators for replacement.
Does this kit include the gasket?
Yes, the 233031 kit includes one 240011 electrode gasket. It is professionally recommended to replace the gasket whenever the ignitor is pulled for inspection to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $124.90
-65%$124.90
$43.71Velocity Boiler Works (Crown) 233031 Ignitor With Gasket
For high-efficiency ignition in Velocity Boiler Works BWC series condensing boilers, the Velocity Boiler Works (Crown) 233031 Ignitor With Gasket is the specified OEM boiler replacement part for ensuring reliable spark in a sealed combustion environment. This kit, often identified by technicians as the Velocity Boiler 233031 igniter kit, includes the primary 240010 electrode, a high-temperature 240011 electrode gasket, and two M4 hex nuts for precise torque and alignment. This assembly is critical for Crown BWC070, BWC150, and BWC151 models, providing the consistent arc necessary for optimal fuel-to-air combustion. The pre-installed gasket is engineered from durable nitrile/EPDM and rated for temperatures between 1000°F and 1200°F, preventing dangerous flue gas leakage and maintaining the pressure integrity of the heat exchanger assembly. Using a genuine Velocity Boiler Works ignitor guarantees correct flame sensing and ignition cycles, reducing common issues like short cycling or ignition failure codes in residential and commercial hydronic systems.
Key Benefits for Technicians
- Exact Compatibility: Precision-fit for Velocity Boiler Works BWC series, specifically models BWC070, BWC150, and BWC151.
- Sealed Combustion Security: Includes a 240011 electrode gasket to ensure a gas-tight seal against the burner plate.
- Durable OEM Build: Robust electrode construction withstands the high-temperature environment of commercial and residential condensing boilers.
- Rapid Replacement: Kit includes all necessary fasteners (M4 hex nuts) for a clean swap during emergency service calls.
- Reliable Ignition: Engineered to provide stable arc performance, minimizing downtime caused by ignition lockout.
Common Questions
Which boiler models use the 233031 ignitor?
This ignitor kit is designed specifically for Velocity Boiler Works (formerly Crown Boiler) BWC series condensing boilers, including technical applications for the Crown BWC070, BWC150, and BWC151 systems.
What is the typical resistance or voltage for this ignitor?
This component operates within a wide voltage range of 24V to 240V depending on the control board signal. When diagnosing with a multimeter, ensure the power is off and check for continuity; a cracked ceramic insulator or fouled electrode tip are common indicators for replacement.
Does this kit include the gasket?
Yes, the 233031 kit includes one 240011 electrode gasket. It is professionally recommended to replace the gasket whenever the ignitor is pulled for inspection to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For high-efficiency ignition in Velocity Boiler Works BWC series condensing boilers, the Velocity Boiler Works (Crown) 233031 Ignitor With Gasket is the specified OEM boiler replacement part for ensuring reliable spark in a sealed combustion environment. This kit, often identified by technicians as the Velocity Boiler 233031 igniter kit, includes the primary 240010 electrode, a high-temperature 240011 electrode gasket, and two M4 hex nuts for precise torque and alignment. This assembly is critical for Crown BWC070, BWC150, and BWC151 models, providing the consistent arc necessary for optimal fuel-to-air combustion. The pre-installed gasket is engineered from durable nitrile/EPDM and rated for temperatures between 1000°F and 1200°F, preventing dangerous flue gas leakage and maintaining the pressure integrity of the heat exchanger assembly. Using a genuine Velocity Boiler Works ignitor guarantees correct flame sensing and ignition cycles, reducing common issues like short cycling or ignition failure codes in residential and commercial hydronic systems.
Key Benefits for Technicians
- Exact Compatibility: Precision-fit for Velocity Boiler Works BWC series, specifically models BWC070, BWC150, and BWC151.
- Sealed Combustion Security: Includes a 240011 electrode gasket to ensure a gas-tight seal against the burner plate.
- Durable OEM Build: Robust electrode construction withstands the high-temperature environment of commercial and residential condensing boilers.
- Rapid Replacement: Kit includes all necessary fasteners (M4 hex nuts) for a clean swap during emergency service calls.
- Reliable Ignition: Engineered to provide stable arc performance, minimizing downtime caused by ignition lockout.
Common Questions
Which boiler models use the 233031 ignitor?
This ignitor kit is designed specifically for Velocity Boiler Works (formerly Crown Boiler) BWC series condensing boilers, including technical applications for the Crown BWC070, BWC150, and BWC151 systems.
What is the typical resistance or voltage for this ignitor?
This component operates within a wide voltage range of 24V to 240V depending on the control board signal. When diagnosing with a multimeter, ensure the power is off and check for continuity; a cracked ceramic insulator or fouled electrode tip are common indicators for replacement.
Does this kit include the gasket?
Yes, the 233031 kit includes one 240011 electrode gasket. It is professionally recommended to replace the gasket whenever the ignitor is pulled for inspection to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
