Velocity Boiler Works (Crown) 130003 Cleancut Pump
The Velocity Boiler Works 13003 CleanCut Pump is a single-stage fuel unit engineered for high-performance residential and light commercial oil burners. This fuel oil pump, which is technically identical to the Beckett 2184404U (also indexed as 01-2184404U), utilizes an integrated solenoid valve to provide instantaneous oil cutoff. By eliminating coasting stops, it prevents soot accumulation and ensures a cleaner combustion cycle. Built for durability, it features a 3450 RPM motor speed and a high-capacity strainer rated for 3 GPH at pressures up to 100-200 psi. The CleanCut pump design reduces the starting load on the burner motor by allowing oil to bypass the piston until full operating speed is reached. This Suntec A2VA-7116 series compatible unit is factory-configured for one-pipe systems but is field-convertible for two-pipe installations using a bypass plug. It is suitable for HVAC contractors looking for a reliable replacement that supports #2 fuel oil and biodiesel blends up to B5.
Key Benefits- Instantaneous Cut-Off: The 110V/120V solenoid valve prevents oil after-drip, reducing heat exchanger fouling and service calls.
- Reduced Motor Strain: Unique bypass circuit lowers torque requirements during startup, extending the life of the burner motor.
- Universal Versatility: Direct replacement for 01-2184404U and standard Suntec A2VA-7116 models used on Beckett, Carlin, and Wayne burners.
- High Lift Capability: Engineered for superior suction in both gravity-feed and lift applications (up to 8ft in single-pipe).
- Simplified Maintenance: Features fewer moving parts than traditional pump-and-external-valve configurations.
Is the 130003 compatible with biodiesel?
This unit is UL-approved for use with standard #2 heating oil and biodiesel blends up to B5. For higher concentrations like B20, verify seal compatibility with the B-series specialized models.
Can I use this on a two-pipe system?
Yes. While it comes ready for one-pipe operation, you can convert it to a two-pipe system by installing the internal bypass plug (typically 1/16") in the return port.
Why is there no fuel reaching the nozzle after installation?
Ensure the solenoid coil is energized. If the burner motor runs but no oil flows, check if the CleanCut cordset is properly seated or use an ohmmeter to verify the coil is not open.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Velocity Boiler Works (Crown) 130003 Cleancut Pump
The Velocity Boiler Works 13003 CleanCut Pump is a single-stage fuel unit engineered for high-performance residential and light commercial oil burners. This fuel oil pump, which is technically identical to the Beckett 2184404U (also indexed as 01-2184404U), utilizes an integrated solenoid valve to provide instantaneous oil cutoff. By eliminating coasting stops, it prevents soot accumulation and ensures a cleaner combustion cycle. Built for durability, it features a 3450 RPM motor speed and a high-capacity strainer rated for 3 GPH at pressures up to 100-200 psi. The CleanCut pump design reduces the starting load on the burner motor by allowing oil to bypass the piston until full operating speed is reached. This Suntec A2VA-7116 series compatible unit is factory-configured for one-pipe systems but is field-convertible for two-pipe installations using a bypass plug. It is suitable for HVAC contractors looking for a reliable replacement that supports #2 fuel oil and biodiesel blends up to B5.
Key Benefits- Instantaneous Cut-Off: The 110V/120V solenoid valve prevents oil after-drip, reducing heat exchanger fouling and service calls.
- Reduced Motor Strain: Unique bypass circuit lowers torque requirements during startup, extending the life of the burner motor.
- Universal Versatility: Direct replacement for 01-2184404U and standard Suntec A2VA-7116 models used on Beckett, Carlin, and Wayne burners.
- High Lift Capability: Engineered for superior suction in both gravity-feed and lift applications (up to 8ft in single-pipe).
- Simplified Maintenance: Features fewer moving parts than traditional pump-and-external-valve configurations.
Is the 130003 compatible with biodiesel?
This unit is UL-approved for use with standard #2 heating oil and biodiesel blends up to B5. For higher concentrations like B20, verify seal compatibility with the B-series specialized models.
Can I use this on a two-pipe system?
Yes. While it comes ready for one-pipe operation, you can convert it to a two-pipe system by installing the internal bypass plug (typically 1/16") in the return port.
Why is there no fuel reaching the nozzle after installation?
Ensure the solenoid coil is energized. If the burner motor runs but no oil flows, check if the CleanCut cordset is properly seated or use an ohmmeter to verify the coil is not open.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Velocity Boiler Works 13003 CleanCut Pump is a single-stage fuel unit engineered for high-performance residential and light commercial oil burners. This fuel oil pump, which is technically identical to the Beckett 2184404U (also indexed as 01-2184404U), utilizes an integrated solenoid valve to provide instantaneous oil cutoff. By eliminating coasting stops, it prevents soot accumulation and ensures a cleaner combustion cycle. Built for durability, it features a 3450 RPM motor speed and a high-capacity strainer rated for 3 GPH at pressures up to 100-200 psi. The CleanCut pump design reduces the starting load on the burner motor by allowing oil to bypass the piston until full operating speed is reached. This Suntec A2VA-7116 series compatible unit is factory-configured for one-pipe systems but is field-convertible for two-pipe installations using a bypass plug. It is suitable for HVAC contractors looking for a reliable replacement that supports #2 fuel oil and biodiesel blends up to B5.
Key Benefits- Instantaneous Cut-Off: The 110V/120V solenoid valve prevents oil after-drip, reducing heat exchanger fouling and service calls.
- Reduced Motor Strain: Unique bypass circuit lowers torque requirements during startup, extending the life of the burner motor.
- Universal Versatility: Direct replacement for 01-2184404U and standard Suntec A2VA-7116 models used on Beckett, Carlin, and Wayne burners.
- High Lift Capability: Engineered for superior suction in both gravity-feed and lift applications (up to 8ft in single-pipe).
- Simplified Maintenance: Features fewer moving parts than traditional pump-and-external-valve configurations.
Is the 130003 compatible with biodiesel?
This unit is UL-approved for use with standard #2 heating oil and biodiesel blends up to B5. For higher concentrations like B20, verify seal compatibility with the B-series specialized models.
Can I use this on a two-pipe system?
Yes. While it comes ready for one-pipe operation, you can convert it to a two-pipe system by installing the internal bypass plug (typically 1/16") in the return port.
Why is there no fuel reaching the nozzle after installation?
Ensure the solenoid coil is energized. If the burner motor runs but no oil flows, check if the CleanCut cordset is properly seated or use an ohmmeter to verify the coil is not open.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
