Sta-Rite Pumps FNC-L Pump and Motor
The Sta-Rite FNC-L Pump and Motor serves as a rugged 1/2 HP centrifugal pump designed for high-performance shallow well jet pump applications, specifically where lift requirements do not exceed 25 feet. This unit features a heavy-duty close-grained cast iron body and base, precision-treated for superior corrosion resistance in demanding HVACR and agricultural environments. Built with a 115V single-phase motor, the FNC-L utilizes a Noryl impeller and a precision-molded diffuser to ensure rapid priming and efficient air handling. Professional contractors rely on its stainless steel shaft and internal mechanical shaft seal, which is precision-lapped for a carbon-ceramic, leak-proof interface. The motor is engineered with sealed ball bearings and high-grade insulation to resist moisture and contaminants, maintaining performance in harsh climates. A built-in pressure switch with a fixed 20 PSI differential and a dustproof canopy protect critical electrical components from debris, making this self-priming pump a staple for reliable water delivery and pressure boosting in small-scale irrigation or residential systems.
Key Benefits
- Corrosion-Resistant Construction: Close-grained cast iron housing and stainless steel shaft ensure longevity in high-moisture environments.
- Efficient Priming: Multi-port, reinforced polypropylene diffuser allows the pump to prime faster and handle air pockets without losing pressure.
- Contaminant Protection: A dustproof motor cover and shielded ball bearings prevent dirt and insects from fouling electrical switching components.
- Serviceability: Includes a dedicated drain port for winterizing and a cleanout plug for debris removal, reducing downtime during maintenance.
Common Questions
What is the maximum lift and suction capacity for this model?
The FNC-L is rated for a maximum lift of 25 vertical feet. It features a 1-1/4 inch NPT suction port and a 1 inch NPT discharge, delivering approximately 6 GPM at a 10-foot lift with a 40 PSI setting.
How do I prevent air leaks in the suction line?
Inspect the drain plug o-rings and pump lid seals regularly. Deteriorated rubber components are the most common source of "vacuum leaks" that prevent proper priming. Using high-quality replacement o-rings is recommended for arid or freezing climates.
Can this motor be rewired for 230V operation?
While many Sta-Rite FN series motors are dual-voltage (115/230V), this specific 115V unit is configured for standard domestic electrical supplies. Always verify the wiring diagram on the motor nameplate before adjusting voltage settings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Sta-Rite Pumps FNC-L Pump and Motor
The Sta-Rite FNC-L Pump and Motor serves as a rugged 1/2 HP centrifugal pump designed for high-performance shallow well jet pump applications, specifically where lift requirements do not exceed 25 feet. This unit features a heavy-duty close-grained cast iron body and base, precision-treated for superior corrosion resistance in demanding HVACR and agricultural environments. Built with a 115V single-phase motor, the FNC-L utilizes a Noryl impeller and a precision-molded diffuser to ensure rapid priming and efficient air handling. Professional contractors rely on its stainless steel shaft and internal mechanical shaft seal, which is precision-lapped for a carbon-ceramic, leak-proof interface. The motor is engineered with sealed ball bearings and high-grade insulation to resist moisture and contaminants, maintaining performance in harsh climates. A built-in pressure switch with a fixed 20 PSI differential and a dustproof canopy protect critical electrical components from debris, making this self-priming pump a staple for reliable water delivery and pressure boosting in small-scale irrigation or residential systems.
Key Benefits
- Corrosion-Resistant Construction: Close-grained cast iron housing and stainless steel shaft ensure longevity in high-moisture environments.
- Efficient Priming: Multi-port, reinforced polypropylene diffuser allows the pump to prime faster and handle air pockets without losing pressure.
- Contaminant Protection: A dustproof motor cover and shielded ball bearings prevent dirt and insects from fouling electrical switching components.
- Serviceability: Includes a dedicated drain port for winterizing and a cleanout plug for debris removal, reducing downtime during maintenance.
Common Questions
What is the maximum lift and suction capacity for this model?
The FNC-L is rated for a maximum lift of 25 vertical feet. It features a 1-1/4 inch NPT suction port and a 1 inch NPT discharge, delivering approximately 6 GPM at a 10-foot lift with a 40 PSI setting.
How do I prevent air leaks in the suction line?
Inspect the drain plug o-rings and pump lid seals regularly. Deteriorated rubber components are the most common source of "vacuum leaks" that prevent proper priming. Using high-quality replacement o-rings is recommended for arid or freezing climates.
Can this motor be rewired for 230V operation?
While many Sta-Rite FN series motors are dual-voltage (115/230V), this specific 115V unit is configured for standard domestic electrical supplies. Always verify the wiring diagram on the motor nameplate before adjusting voltage settings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Sta-Rite FNC-L Pump and Motor serves as a rugged 1/2 HP centrifugal pump designed for high-performance shallow well jet pump applications, specifically where lift requirements do not exceed 25 feet. This unit features a heavy-duty close-grained cast iron body and base, precision-treated for superior corrosion resistance in demanding HVACR and agricultural environments. Built with a 115V single-phase motor, the FNC-L utilizes a Noryl impeller and a precision-molded diffuser to ensure rapid priming and efficient air handling. Professional contractors rely on its stainless steel shaft and internal mechanical shaft seal, which is precision-lapped for a carbon-ceramic, leak-proof interface. The motor is engineered with sealed ball bearings and high-grade insulation to resist moisture and contaminants, maintaining performance in harsh climates. A built-in pressure switch with a fixed 20 PSI differential and a dustproof canopy protect critical electrical components from debris, making this self-priming pump a staple for reliable water delivery and pressure boosting in small-scale irrigation or residential systems.
Key Benefits
- Corrosion-Resistant Construction: Close-grained cast iron housing and stainless steel shaft ensure longevity in high-moisture environments.
- Efficient Priming: Multi-port, reinforced polypropylene diffuser allows the pump to prime faster and handle air pockets without losing pressure.
- Contaminant Protection: A dustproof motor cover and shielded ball bearings prevent dirt and insects from fouling electrical switching components.
- Serviceability: Includes a dedicated drain port for winterizing and a cleanout plug for debris removal, reducing downtime during maintenance.
Common Questions
What is the maximum lift and suction capacity for this model?
The FNC-L is rated for a maximum lift of 25 vertical feet. It features a 1-1/4 inch NPT suction port and a 1 inch NPT discharge, delivering approximately 6 GPM at a 10-foot lift with a 40 PSI setting.
How do I prevent air leaks in the suction line?
Inspect the drain plug o-rings and pump lid seals regularly. Deteriorated rubber components are the most common source of "vacuum leaks" that prevent proper priming. Using high-quality replacement o-rings is recommended for arid or freezing climates.
Can this motor be rewired for 230V operation?
While many Sta-Rite FN series motors are dual-voltage (115/230V), this specific 115V unit is configured for standard domestic electrical supplies. Always verify the wiring diagram on the motor nameplate before adjusting voltage settings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
