SKF Bearings 6313 Bearing
The SKF 6313 Bearing is a high-performance radial deep groove ball bearing designed for the heavy-duty demands of industrial HVACR systems, including large-scale centrifugal pumps and commercial air handlers. This 65mm bore unit features a robust 140mm outside diameter and a 33mm width, engineered to accommodate high radial loads and significant axial thrust in both directions. As an open closure design with a C0 internal clearance, it is optimized for applications where consistent lubrication is managed through the housing, allowing for a limiting speed of approximately 6,700 RPM and a reference speed of 10,000 RPM. The pressed steel cage ensures precise ball guidance and structural integrity under thermal stress, maintaining dimensional stability in rigorous environments. With a basic dynamic load rating of 97.5 kN, this uncoated bearing provides the reliable service life required for critical rotating HVACR components. Its cylindrical bore and lack of a snap ring facilitate standard interference fits on precision-ground shafts.
Key Benefits:- High-Speed Capability: Optimized for low friction and vibration, supporting rotational speeds up to 10,000 RPM.
- Multi-Directional Loading: Deep groove raceways handle simultaneous radial and axial loads across diverse motor and blower applications.
- Simplified Maintenance: Open design allows for direct inspection and relubrication within protected housings.
- Precision Tolerance: Manufactured to SKF Explorer performance standards for superior wear resistance.
- Can this bearing be used in vertical shaft applications? Yes, the deep groove design is capable of managing the axial loads typical of vertical fan or pump alignments.
- Is the C0 clearance suitable for standard HVAC motors? C0 internal clearance is the industry standard for most HVACR motor applications, providing the necessary operational play without excessive noise.
- Does this unit come pre-greased? No, as an open bearing, it is supplied with an oil-based rust preventative and requires a site-specific lubricant during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
SKF Bearings 6313 Bearing
The SKF 6313 Bearing is a high-performance radial deep groove ball bearing designed for the heavy-duty demands of industrial HVACR systems, including large-scale centrifugal pumps and commercial air handlers. This 65mm bore unit features a robust 140mm outside diameter and a 33mm width, engineered to accommodate high radial loads and significant axial thrust in both directions. As an open closure design with a C0 internal clearance, it is optimized for applications where consistent lubrication is managed through the housing, allowing for a limiting speed of approximately 6,700 RPM and a reference speed of 10,000 RPM. The pressed steel cage ensures precise ball guidance and structural integrity under thermal stress, maintaining dimensional stability in rigorous environments. With a basic dynamic load rating of 97.5 kN, this uncoated bearing provides the reliable service life required for critical rotating HVACR components. Its cylindrical bore and lack of a snap ring facilitate standard interference fits on precision-ground shafts.
Key Benefits:- High-Speed Capability: Optimized for low friction and vibration, supporting rotational speeds up to 10,000 RPM.
- Multi-Directional Loading: Deep groove raceways handle simultaneous radial and axial loads across diverse motor and blower applications.
- Simplified Maintenance: Open design allows for direct inspection and relubrication within protected housings.
- Precision Tolerance: Manufactured to SKF Explorer performance standards for superior wear resistance.
- Can this bearing be used in vertical shaft applications? Yes, the deep groove design is capable of managing the axial loads typical of vertical fan or pump alignments.
- Is the C0 clearance suitable for standard HVAC motors? C0 internal clearance is the industry standard for most HVACR motor applications, providing the necessary operational play without excessive noise.
- Does this unit come pre-greased? No, as an open bearing, it is supplied with an oil-based rust preventative and requires a site-specific lubricant during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SKF 6313 Bearing is a high-performance radial deep groove ball bearing designed for the heavy-duty demands of industrial HVACR systems, including large-scale centrifugal pumps and commercial air handlers. This 65mm bore unit features a robust 140mm outside diameter and a 33mm width, engineered to accommodate high radial loads and significant axial thrust in both directions. As an open closure design with a C0 internal clearance, it is optimized for applications where consistent lubrication is managed through the housing, allowing for a limiting speed of approximately 6,700 RPM and a reference speed of 10,000 RPM. The pressed steel cage ensures precise ball guidance and structural integrity under thermal stress, maintaining dimensional stability in rigorous environments. With a basic dynamic load rating of 97.5 kN, this uncoated bearing provides the reliable service life required for critical rotating HVACR components. Its cylindrical bore and lack of a snap ring facilitate standard interference fits on precision-ground shafts.
Key Benefits:- High-Speed Capability: Optimized for low friction and vibration, supporting rotational speeds up to 10,000 RPM.
- Multi-Directional Loading: Deep groove raceways handle simultaneous radial and axial loads across diverse motor and blower applications.
- Simplified Maintenance: Open design allows for direct inspection and relubrication within protected housings.
- Precision Tolerance: Manufactured to SKF Explorer performance standards for superior wear resistance.
- Can this bearing be used in vertical shaft applications? Yes, the deep groove design is capable of managing the axial loads typical of vertical fan or pump alignments.
- Is the C0 clearance suitable for standard HVAC motors? C0 internal clearance is the industry standard for most HVACR motor applications, providing the necessary operational play without excessive noise.
- Does this unit come pre-greased? No, as an open bearing, it is supplied with an oil-based rust preventative and requires a site-specific lubricant during installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
