SKF Bearings 6205-2Z Bearing
The SKF 6205-2Z bearing is a high-performance radial deep groove ball bearing engineered for reliability in demanding HVACR applications, such as commercial blowers, condenser fan motors, and circulation pumps. Designed for high rotational speeds, this SKF Explorer class component features a 25mm inside diameter, a 52mm outside diameter, and a 15mm width. The double shielded closure (2Z) utilizes non-contact metallic shields to effectively retain high-quality lubricating grease while protecting the steel cage material and precision raceways from large airborne particulates without adding rotational friction.
Built with C0 internal clearance, this single-row bearing provides optimal radial stability and handles combined axial and radial loads in both directions. The SKF 6205-2Z is optimized for low vibration and noise, which is critical for maintaining the acoustic standards of indoor air handling units. With a limiting speed of 14,000 RPM and a robust dynamic load rating of 14.8 kN, this industrial ball bearing ensures consistent performance and reduced maintenance cycles in continuous-duty motor applications.
Key Benefits- Enhanced Protection: Double shields (2Z) keep factory-applied lubricant in and debris out for extended service life in dusty mechanical rooms.
- High-Speed Stability: Precision-ground raceways support limiting speeds of up to 14,000 RPM, ideal for direct-drive fan motors.
- Optimized Clearances: Standard C0 (CN) radial internal clearance ensures a tight, stable fit for standard temperature operating ranges.
- Versatile Load Management: Deep groove architecture accommodates both significant radial loads and moderate axial thrust.
What is the difference between a 6205-2Z and a 6205-2RS bearing?
The 2Z suffix indicates metallic shields which are non-contact, allowing for higher speed limits and lower friction. In contrast, 2RS uses rubber contact seals which provide better moisture protection but generate more heat and have lower RPM thresholds.
Can this bearing be used in vertical motor mounts?
Yes, the 6205-2Z is designed to handle both radial and axial loads, making it suitable for vertical shaft orientations commonly found in specific HVAC blower configurations.
Is the SKF 6205-2Z pre-lubricated?
Yes, these bearings are supplied pre-filled with high-quality grease intended for the duration of the part's operational life, requiring no further lubrication after installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
SKF Bearings 6205-2Z Bearing
The SKF 6205-2Z bearing is a high-performance radial deep groove ball bearing engineered for reliability in demanding HVACR applications, such as commercial blowers, condenser fan motors, and circulation pumps. Designed for high rotational speeds, this SKF Explorer class component features a 25mm inside diameter, a 52mm outside diameter, and a 15mm width. The double shielded closure (2Z) utilizes non-contact metallic shields to effectively retain high-quality lubricating grease while protecting the steel cage material and precision raceways from large airborne particulates without adding rotational friction.
Built with C0 internal clearance, this single-row bearing provides optimal radial stability and handles combined axial and radial loads in both directions. The SKF 6205-2Z is optimized for low vibration and noise, which is critical for maintaining the acoustic standards of indoor air handling units. With a limiting speed of 14,000 RPM and a robust dynamic load rating of 14.8 kN, this industrial ball bearing ensures consistent performance and reduced maintenance cycles in continuous-duty motor applications.
Key Benefits- Enhanced Protection: Double shields (2Z) keep factory-applied lubricant in and debris out for extended service life in dusty mechanical rooms.
- High-Speed Stability: Precision-ground raceways support limiting speeds of up to 14,000 RPM, ideal for direct-drive fan motors.
- Optimized Clearances: Standard C0 (CN) radial internal clearance ensures a tight, stable fit for standard temperature operating ranges.
- Versatile Load Management: Deep groove architecture accommodates both significant radial loads and moderate axial thrust.
What is the difference between a 6205-2Z and a 6205-2RS bearing?
The 2Z suffix indicates metallic shields which are non-contact, allowing for higher speed limits and lower friction. In contrast, 2RS uses rubber contact seals which provide better moisture protection but generate more heat and have lower RPM thresholds.
Can this bearing be used in vertical motor mounts?
Yes, the 6205-2Z is designed to handle both radial and axial loads, making it suitable for vertical shaft orientations commonly found in specific HVAC blower configurations.
Is the SKF 6205-2Z pre-lubricated?
Yes, these bearings are supplied pre-filled with high-quality grease intended for the duration of the part's operational life, requiring no further lubrication after installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SKF 6205-2Z bearing is a high-performance radial deep groove ball bearing engineered for reliability in demanding HVACR applications, such as commercial blowers, condenser fan motors, and circulation pumps. Designed for high rotational speeds, this SKF Explorer class component features a 25mm inside diameter, a 52mm outside diameter, and a 15mm width. The double shielded closure (2Z) utilizes non-contact metallic shields to effectively retain high-quality lubricating grease while protecting the steel cage material and precision raceways from large airborne particulates without adding rotational friction.
Built with C0 internal clearance, this single-row bearing provides optimal radial stability and handles combined axial and radial loads in both directions. The SKF 6205-2Z is optimized for low vibration and noise, which is critical for maintaining the acoustic standards of indoor air handling units. With a limiting speed of 14,000 RPM and a robust dynamic load rating of 14.8 kN, this industrial ball bearing ensures consistent performance and reduced maintenance cycles in continuous-duty motor applications.
Key Benefits- Enhanced Protection: Double shields (2Z) keep factory-applied lubricant in and debris out for extended service life in dusty mechanical rooms.
- High-Speed Stability: Precision-ground raceways support limiting speeds of up to 14,000 RPM, ideal for direct-drive fan motors.
- Optimized Clearances: Standard C0 (CN) radial internal clearance ensures a tight, stable fit for standard temperature operating ranges.
- Versatile Load Management: Deep groove architecture accommodates both significant radial loads and moderate axial thrust.
What is the difference between a 6205-2Z and a 6205-2RS bearing?
The 2Z suffix indicates metallic shields which are non-contact, allowing for higher speed limits and lower friction. In contrast, 2RS uses rubber contact seals which provide better moisture protection but generate more heat and have lower RPM thresholds.
Can this bearing be used in vertical motor mounts?
Yes, the 6205-2Z is designed to handle both radial and axial loads, making it suitable for vertical shaft orientations commonly found in specific HVAC blower configurations.
Is the SKF 6205-2Z pre-lubricated?
Yes, these bearings are supplied pre-filled with high-quality grease intended for the duration of the part's operational life, requiring no further lubrication after installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
