Schneider Electric (Viconics) VT7200C5531E Control
The Schneider Electric (Viconics) VT7200C5531E Control is a purpose-built VAV zone controller engineered for precise performance in pressure-dependent applications. Delivering high-resolution PI proportional control, this device eliminates the temperature hunting typical of standard differential thermostats, stabilizing reheat and perimeter radiation systems. This vertical-mount unit features a factory-installed Passive Infrared (PIR) sensor, streamlining demand-based occupancy sequences without the need for external hardware. Designed for LonWorks network integration through Echelon technology, it allows for seamless communication within a larger building automation system (BAS) architecture.
For field deployment, this controller provides 2 on/off or floating outputs and a dedicated auxiliary contact for lighting control or supplemental heat. Its logic-embedded interface requires no specialized software, allowing technicians to configure setpoints, deadbands, and occupancy parameters directly through the backlit LCD. The 24 Vac low-voltage hardware is housed in a rugged plastic enclosure, making it a reliable choice for commercial HVAC zoning retrofits and new construction where 10k NTC thermistor accuracy is critical.
- Native LonWorks Integration: Facilitates high-speed network communication via Echelon protocol for centralized building management.
- Integrated PIR Occupancy: Optimized for energy savings with built-in occupancy sensing for automated setback.
- Advanced Control Logic: Uses a PI algorithm to maintain strict environmental tolerances in induction units and fan coils.
- Contractor-Friendly Setup: Local configuration utility eliminates the need for a laptop or proprietary commissioning tools.
Common Questions
Is the VT7200C5531E compatible with pressure-independent VAV boxes?
No, this specific model is optimized for pressure-dependent VAV box control. For pressure-independent systems requiring an integrated airflow sensor, alternate Viconics families should be specified.
How do I wire the floating outputs for a reheat valve?
The unit utilizes triac outputs rated for 30 Vac at 1 Amp. Ensure your floating point actuator is correctly phased to the common terminal to prevent short-cycling or timing errors.
Can I use this for both lighting and temperature control?
Yes, the included auxiliary contact can be configured to toggle lighting systems based on the occupancy status detected by the onboard PIR sensor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $475.85
-65%$475.85
$166.55Schneider Electric (Viconics) VT7200C5531E Control
The Schneider Electric (Viconics) VT7200C5531E Control is a purpose-built VAV zone controller engineered for precise performance in pressure-dependent applications. Delivering high-resolution PI proportional control, this device eliminates the temperature hunting typical of standard differential thermostats, stabilizing reheat and perimeter radiation systems. This vertical-mount unit features a factory-installed Passive Infrared (PIR) sensor, streamlining demand-based occupancy sequences without the need for external hardware. Designed for LonWorks network integration through Echelon technology, it allows for seamless communication within a larger building automation system (BAS) architecture.
For field deployment, this controller provides 2 on/off or floating outputs and a dedicated auxiliary contact for lighting control or supplemental heat. Its logic-embedded interface requires no specialized software, allowing technicians to configure setpoints, deadbands, and occupancy parameters directly through the backlit LCD. The 24 Vac low-voltage hardware is housed in a rugged plastic enclosure, making it a reliable choice for commercial HVAC zoning retrofits and new construction where 10k NTC thermistor accuracy is critical.
- Native LonWorks Integration: Facilitates high-speed network communication via Echelon protocol for centralized building management.
- Integrated PIR Occupancy: Optimized for energy savings with built-in occupancy sensing for automated setback.
- Advanced Control Logic: Uses a PI algorithm to maintain strict environmental tolerances in induction units and fan coils.
- Contractor-Friendly Setup: Local configuration utility eliminates the need for a laptop or proprietary commissioning tools.
Common Questions
Is the VT7200C5531E compatible with pressure-independent VAV boxes?
No, this specific model is optimized for pressure-dependent VAV box control. For pressure-independent systems requiring an integrated airflow sensor, alternate Viconics families should be specified.
How do I wire the floating outputs for a reheat valve?
The unit utilizes triac outputs rated for 30 Vac at 1 Amp. Ensure your floating point actuator is correctly phased to the common terminal to prevent short-cycling or timing errors.
Can I use this for both lighting and temperature control?
Yes, the included auxiliary contact can be configured to toggle lighting systems based on the occupancy status detected by the onboard PIR sensor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Schneider Electric (Viconics) VT7200C5531E Control is a purpose-built VAV zone controller engineered for precise performance in pressure-dependent applications. Delivering high-resolution PI proportional control, this device eliminates the temperature hunting typical of standard differential thermostats, stabilizing reheat and perimeter radiation systems. This vertical-mount unit features a factory-installed Passive Infrared (PIR) sensor, streamlining demand-based occupancy sequences without the need for external hardware. Designed for LonWorks network integration through Echelon technology, it allows for seamless communication within a larger building automation system (BAS) architecture.
For field deployment, this controller provides 2 on/off or floating outputs and a dedicated auxiliary contact for lighting control or supplemental heat. Its logic-embedded interface requires no specialized software, allowing technicians to configure setpoints, deadbands, and occupancy parameters directly through the backlit LCD. The 24 Vac low-voltage hardware is housed in a rugged plastic enclosure, making it a reliable choice for commercial HVAC zoning retrofits and new construction where 10k NTC thermistor accuracy is critical.
- Native LonWorks Integration: Facilitates high-speed network communication via Echelon protocol for centralized building management.
- Integrated PIR Occupancy: Optimized for energy savings with built-in occupancy sensing for automated setback.
- Advanced Control Logic: Uses a PI algorithm to maintain strict environmental tolerances in induction units and fan coils.
- Contractor-Friendly Setup: Local configuration utility eliminates the need for a laptop or proprietary commissioning tools.
Common Questions
Is the VT7200C5531E compatible with pressure-independent VAV boxes?
No, this specific model is optimized for pressure-dependent VAV box control. For pressure-independent systems requiring an integrated airflow sensor, alternate Viconics families should be specified.
How do I wire the floating outputs for a reheat valve?
The unit utilizes triac outputs rated for 30 Vac at 1 Amp. Ensure your floating point actuator is correctly phased to the common terminal to prevent short-cycling or timing errors.
Can I use this for both lighting and temperature control?
Yes, the included auxiliary contact can be configured to toggle lighting systems based on the occupancy status detected by the onboard PIR sensor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
