Schneider Electric (Viconics) SE7200C5045B Zoning Controller
The Schneider Electric (Viconics) SE7200C5045B Zoning Controller is a high-performance, low-voltage terminal equipment controller engineered specifically for pressure-dependent VAV box control, baseboard heat, and radiant panel applications. Built on the SE7000 Series architecture, this unit provides precise environmental management via floating or on/off digital control outputs, making it a staple for commercial mechanical contractors upgrading legacy pneumatic systems or installing modern BACnet MS/TP networks. Its native BACnet MS/TP communication protocol ensures seamless integration into building automation systems (BAS), allowing for remote monitoring of over 70 configurable properties without the need for complex external software or high-cost DDC programming tools.
Designed for immediate field reliability, the SE7200C5045B is PIR ready, featuring a diagnostic LED and connector for quick installation of an optional passive infrared occupancy sensor cover. This allows for advanced occupancy strategies, such as switching from "Occupied" to "Stand-By" to reduce energy consumption in vacant zones. The interface is highly intuitive, featuring a two-line backlit LCD display and adjustable deadbands to maintain tight setpoint accuracy. This zoning thermostat effectively bridges the gap between stand-alone operation and fully integrated smart building management, delivering a scalable solution that accelerates project delivery times for commercial retrofits and new construction alike.
Key Benefits- Native BACnet MS/TP Integration: Facilitates standard open-protocol communication for simplified building management system connectivity.
- Versatile Output Control: Supports floating or on-off digital control, optimized for terminal unit actuators and reheat valves.
- Energy Optimization: PIR ready design enables demand-based occupancy sequences to lower operational costs in unoccupied spaces.
- Contractor-Friendly Setup: Menu-driven programming through the local keypad eliminates the requirement for specialized commissioning tools.
- Application Flexibility: Features three configurable binary inputs for remote room sensors, door switches, or night setback overrides.
Is the PIR occupancy sensor included with this model?
The SE7200C5045B is PIR ready, meaning it contains the necessary onboard circuitry and connectors, but the physical PIR sensor cover is sold separately for field installation.
What type of HVAC equipment is this controller compatible with?
It is primarily used for zoning applications involving 1-heat/1-cool sequences, specifically pressure-dependent VAV boxes, unit heaters, and hydronic reheat systems.
Does this unit function as a stand-alone controller if the network fails?
Yes, all Schneider Electric SE7200 series controllers are designed for stand-alone operation, maintaining local control logic even if BACnet communication is lost.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $297.12
-65%$297.12
$103.99Schneider Electric (Viconics) SE7200C5045B Zoning Controller
The Schneider Electric (Viconics) SE7200C5045B Zoning Controller is a high-performance, low-voltage terminal equipment controller engineered specifically for pressure-dependent VAV box control, baseboard heat, and radiant panel applications. Built on the SE7000 Series architecture, this unit provides precise environmental management via floating or on/off digital control outputs, making it a staple for commercial mechanical contractors upgrading legacy pneumatic systems or installing modern BACnet MS/TP networks. Its native BACnet MS/TP communication protocol ensures seamless integration into building automation systems (BAS), allowing for remote monitoring of over 70 configurable properties without the need for complex external software or high-cost DDC programming tools.
Designed for immediate field reliability, the SE7200C5045B is PIR ready, featuring a diagnostic LED and connector for quick installation of an optional passive infrared occupancy sensor cover. This allows for advanced occupancy strategies, such as switching from "Occupied" to "Stand-By" to reduce energy consumption in vacant zones. The interface is highly intuitive, featuring a two-line backlit LCD display and adjustable deadbands to maintain tight setpoint accuracy. This zoning thermostat effectively bridges the gap between stand-alone operation and fully integrated smart building management, delivering a scalable solution that accelerates project delivery times for commercial retrofits and new construction alike.
Key Benefits- Native BACnet MS/TP Integration: Facilitates standard open-protocol communication for simplified building management system connectivity.
- Versatile Output Control: Supports floating or on-off digital control, optimized for terminal unit actuators and reheat valves.
- Energy Optimization: PIR ready design enables demand-based occupancy sequences to lower operational costs in unoccupied spaces.
- Contractor-Friendly Setup: Menu-driven programming through the local keypad eliminates the requirement for specialized commissioning tools.
- Application Flexibility: Features three configurable binary inputs for remote room sensors, door switches, or night setback overrides.
Is the PIR occupancy sensor included with this model?
The SE7200C5045B is PIR ready, meaning it contains the necessary onboard circuitry and connectors, but the physical PIR sensor cover is sold separately for field installation.
What type of HVAC equipment is this controller compatible with?
It is primarily used for zoning applications involving 1-heat/1-cool sequences, specifically pressure-dependent VAV boxes, unit heaters, and hydronic reheat systems.
Does this unit function as a stand-alone controller if the network fails?
Yes, all Schneider Electric SE7200 series controllers are designed for stand-alone operation, maintaining local control logic even if BACnet communication is lost.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Schneider Electric (Viconics) SE7200C5045B Zoning Controller is a high-performance, low-voltage terminal equipment controller engineered specifically for pressure-dependent VAV box control, baseboard heat, and radiant panel applications. Built on the SE7000 Series architecture, this unit provides precise environmental management via floating or on/off digital control outputs, making it a staple for commercial mechanical contractors upgrading legacy pneumatic systems or installing modern BACnet MS/TP networks. Its native BACnet MS/TP communication protocol ensures seamless integration into building automation systems (BAS), allowing for remote monitoring of over 70 configurable properties without the need for complex external software or high-cost DDC programming tools.
Designed for immediate field reliability, the SE7200C5045B is PIR ready, featuring a diagnostic LED and connector for quick installation of an optional passive infrared occupancy sensor cover. This allows for advanced occupancy strategies, such as switching from "Occupied" to "Stand-By" to reduce energy consumption in vacant zones. The interface is highly intuitive, featuring a two-line backlit LCD display and adjustable deadbands to maintain tight setpoint accuracy. This zoning thermostat effectively bridges the gap between stand-alone operation and fully integrated smart building management, delivering a scalable solution that accelerates project delivery times for commercial retrofits and new construction alike.
Key Benefits- Native BACnet MS/TP Integration: Facilitates standard open-protocol communication for simplified building management system connectivity.
- Versatile Output Control: Supports floating or on-off digital control, optimized for terminal unit actuators and reheat valves.
- Energy Optimization: PIR ready design enables demand-based occupancy sequences to lower operational costs in unoccupied spaces.
- Contractor-Friendly Setup: Menu-driven programming through the local keypad eliminates the requirement for specialized commissioning tools.
- Application Flexibility: Features three configurable binary inputs for remote room sensors, door switches, or night setback overrides.
Is the PIR occupancy sensor included with this model?
The SE7200C5045B is PIR ready, meaning it contains the necessary onboard circuitry and connectors, but the physical PIR sensor cover is sold separately for field installation.
What type of HVAC equipment is this controller compatible with?
It is primarily used for zoning applications involving 1-heat/1-cool sequences, specifically pressure-dependent VAV boxes, unit heaters, and hydronic reheat systems.
Does this unit function as a stand-alone controller if the network fails?
Yes, all Schneider Electric SE7200 series controllers are designed for stand-alone operation, maintaining local control logic even if BACnet communication is lost.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
