Schneider Electric (Erie) T201 Thermostat
The Schneider Electric (Erie) T201 Thermostat is a high-performance 24V digital heat-only thermostat engineered for precise temperature regulation in residential and light commercial hydronic or forced-air systems. This non-programmable HVAC control features a single-stage heating interface with a dedicated Heat/Off system switch, making it a reliable solution for boiler systems, unit heaters, and single-stage furnaces where fan control or changeover is not required. Designed for vertical mounting, the T201 offers a wide temperature range of 50°F to 86°F and is powered by a 20-32 VAC input, functioning as a power-stealing thermostat with a 75 mA minimum draw. For contractors, the T201 simplifies installation with a separate wall plate and provides stable thermal control through its field-selectable heating differential of 1°F or 2°F.
Key Benefits for Professional Installations
- Advanced System Protection: Includes integrated short cycle protection and a 5-minute jumper-selectable time delay to prevent equipment strain and extend the lifespan of heating components.
- Digital Accuracy: The large LCD window displays current room temperature in increments of 1/5th of a degree using a unique 5-dash indicator system for high-resolution monitoring.
- Selectable Control Logic: Technicians can configure the unit for Fahrenheit or Celsius display and adjust the operating differential to suit the thermal mass of the specific heating application.
- Maintenance-Free Reliability: Uses a setpoint backup battery (typically Energizer 357) to preserve settings during power interruptions without complex programming menus.
- Universal Retrofit Compatibility: The vertical mount design and included base adapter plate make it a direct replacement for older mechanical stats or modern digital units in heat-only configurations.
Common Questions
Does this thermostat support fan-on-demand?No, the Erie T201 is designed specifically for heating-only applications without fan control. It is commonly used for hydronic baseboards and boilers where the fan is not controlled by the thermostat terminal.
What prevents the system from cycling too frequently?This unit features a selectable 1°F or 2°F differential. Increasing the differential to 2°F is recommended for systems with higher thermal lag to prevent short cycling and reduce mechanical wear.
Is a C-wire required for operation?The T201 is a power-stealing digital thermostat that requires at least 75 mA at all times. In some cases with high-efficiency relays, a 250-ohm, 5-watt resistor may be necessary across the load if the current draw is insufficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $83.19
-65%$83.19
$29.12Schneider Electric (Erie) T201 Thermostat
The Schneider Electric (Erie) T201 Thermostat is a high-performance 24V digital heat-only thermostat engineered for precise temperature regulation in residential and light commercial hydronic or forced-air systems. This non-programmable HVAC control features a single-stage heating interface with a dedicated Heat/Off system switch, making it a reliable solution for boiler systems, unit heaters, and single-stage furnaces where fan control or changeover is not required. Designed for vertical mounting, the T201 offers a wide temperature range of 50°F to 86°F and is powered by a 20-32 VAC input, functioning as a power-stealing thermostat with a 75 mA minimum draw. For contractors, the T201 simplifies installation with a separate wall plate and provides stable thermal control through its field-selectable heating differential of 1°F or 2°F.
Key Benefits for Professional Installations
- Advanced System Protection: Includes integrated short cycle protection and a 5-minute jumper-selectable time delay to prevent equipment strain and extend the lifespan of heating components.
- Digital Accuracy: The large LCD window displays current room temperature in increments of 1/5th of a degree using a unique 5-dash indicator system for high-resolution monitoring.
- Selectable Control Logic: Technicians can configure the unit for Fahrenheit or Celsius display and adjust the operating differential to suit the thermal mass of the specific heating application.
- Maintenance-Free Reliability: Uses a setpoint backup battery (typically Energizer 357) to preserve settings during power interruptions without complex programming menus.
- Universal Retrofit Compatibility: The vertical mount design and included base adapter plate make it a direct replacement for older mechanical stats or modern digital units in heat-only configurations.
Common Questions
Does this thermostat support fan-on-demand?No, the Erie T201 is designed specifically for heating-only applications without fan control. It is commonly used for hydronic baseboards and boilers where the fan is not controlled by the thermostat terminal.
What prevents the system from cycling too frequently?This unit features a selectable 1°F or 2°F differential. Increasing the differential to 2°F is recommended for systems with higher thermal lag to prevent short cycling and reduce mechanical wear.
Is a C-wire required for operation?The T201 is a power-stealing digital thermostat that requires at least 75 mA at all times. In some cases with high-efficiency relays, a 250-ohm, 5-watt resistor may be necessary across the load if the current draw is insufficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Schneider Electric (Erie) T201 Thermostat is a high-performance 24V digital heat-only thermostat engineered for precise temperature regulation in residential and light commercial hydronic or forced-air systems. This non-programmable HVAC control features a single-stage heating interface with a dedicated Heat/Off system switch, making it a reliable solution for boiler systems, unit heaters, and single-stage furnaces where fan control or changeover is not required. Designed for vertical mounting, the T201 offers a wide temperature range of 50°F to 86°F and is powered by a 20-32 VAC input, functioning as a power-stealing thermostat with a 75 mA minimum draw. For contractors, the T201 simplifies installation with a separate wall plate and provides stable thermal control through its field-selectable heating differential of 1°F or 2°F.
Key Benefits for Professional Installations
- Advanced System Protection: Includes integrated short cycle protection and a 5-minute jumper-selectable time delay to prevent equipment strain and extend the lifespan of heating components.
- Digital Accuracy: The large LCD window displays current room temperature in increments of 1/5th of a degree using a unique 5-dash indicator system for high-resolution monitoring.
- Selectable Control Logic: Technicians can configure the unit for Fahrenheit or Celsius display and adjust the operating differential to suit the thermal mass of the specific heating application.
- Maintenance-Free Reliability: Uses a setpoint backup battery (typically Energizer 357) to preserve settings during power interruptions without complex programming menus.
- Universal Retrofit Compatibility: The vertical mount design and included base adapter plate make it a direct replacement for older mechanical stats or modern digital units in heat-only configurations.
Common Questions
Does this thermostat support fan-on-demand?No, the Erie T201 is designed specifically for heating-only applications without fan control. It is commonly used for hydronic baseboards and boilers where the fan is not controlled by the thermostat terminal.
What prevents the system from cycling too frequently?This unit features a selectable 1°F or 2°F differential. Increasing the differential to 2°F is recommended for systems with higher thermal lag to prevent short cycling and reduce mechanical wear.
Is a C-wire required for operation?The T201 is a power-stealing digital thermostat that requires at least 75 mA at all times. In some cases with high-efficiency relays, a 250-ohm, 5-watt resistor may be necessary across the load if the current draw is insufficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
