Schneider Electric (Erie) T201-FP Thermostat
For contractors managing residential or light commercial heating-only installations, the Schneider Electric (Erie) T201-FP Digital Thermostat offers a rugged, straightforward solution for single-stage 24VAC systems. This non-programmable unit is specifically engineered for high-reliability environments such as boilers, unit heaters, and hydronic heating where fan control or changeover is not required. It features a broad operating temperature range of 50°F to 86°F and a vertical mounting profile that simplifies field replacement. The integrated freeze protection provides a mechanical contact to latch the heat output at 40°F, ensuring critical system safety during equipment failure or extreme cold. With field-selectable 1°F or 2°F heating differentials and a 5-minute jumper-selectable short-cycle delay, technicians can fine-tune temperature control to prevent equipment wear and maintain steady comfort levels.
Key Benefits for the Contractor
- Freeze Protection Safety: Built-in mechanical contact triggers at 40°F to protect plumbing and HVAC components from freezing.
- Optimized Cycle Control: Selectable heating differentials and a legacy 5-minute short cycle delay extend the service life of burners and pumps.
- Contractor-Friendly Installation: Separate wall plate allows for simplified field wiring and includes a base adapter plate to cover previous footprints.
- Universal 24VAC Compatibility: Standard 2-wire RH/W terminal identification fits seamlessly into most heat-only thermostat wiring configurations.
- Durable Construction: Built with rigid vinyl and an off-white finish for longevity in utility rooms or commercial spaces.
Common Questions
Does this unit require a common wire?
Yes, this is a powered Schneider Electric HVAC thermostat that must receive at least 75mA of power at all times. A 250-ohm, 5-watt resistor may be required if the furnace or boiler control board does not provide sufficient current draw across the W and C terminals.
Can I use the T201-FP with a millivolt system?
This 24Vac digital thermostat cannot operate directly with 750mV or millivolt gas heating systems. An isolation relay and separate 24VAC transformer must be used for those specific legacy applications.
Will this work for a heat pump system?
The T201-FP is designed for single-stage heating only. It does not provide the O/B reversing valve terminals or compressor/fan logic required for heat pump operations.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $94.37
-65%$94.37
$33.03Schneider Electric (Erie) T201-FP Thermostat
For contractors managing residential or light commercial heating-only installations, the Schneider Electric (Erie) T201-FP Digital Thermostat offers a rugged, straightforward solution for single-stage 24VAC systems. This non-programmable unit is specifically engineered for high-reliability environments such as boilers, unit heaters, and hydronic heating where fan control or changeover is not required. It features a broad operating temperature range of 50°F to 86°F and a vertical mounting profile that simplifies field replacement. The integrated freeze protection provides a mechanical contact to latch the heat output at 40°F, ensuring critical system safety during equipment failure or extreme cold. With field-selectable 1°F or 2°F heating differentials and a 5-minute jumper-selectable short-cycle delay, technicians can fine-tune temperature control to prevent equipment wear and maintain steady comfort levels.
Key Benefits for the Contractor
- Freeze Protection Safety: Built-in mechanical contact triggers at 40°F to protect plumbing and HVAC components from freezing.
- Optimized Cycle Control: Selectable heating differentials and a legacy 5-minute short cycle delay extend the service life of burners and pumps.
- Contractor-Friendly Installation: Separate wall plate allows for simplified field wiring and includes a base adapter plate to cover previous footprints.
- Universal 24VAC Compatibility: Standard 2-wire RH/W terminal identification fits seamlessly into most heat-only thermostat wiring configurations.
- Durable Construction: Built with rigid vinyl and an off-white finish for longevity in utility rooms or commercial spaces.
Common Questions
Does this unit require a common wire?
Yes, this is a powered Schneider Electric HVAC thermostat that must receive at least 75mA of power at all times. A 250-ohm, 5-watt resistor may be required if the furnace or boiler control board does not provide sufficient current draw across the W and C terminals.
Can I use the T201-FP with a millivolt system?
This 24Vac digital thermostat cannot operate directly with 750mV or millivolt gas heating systems. An isolation relay and separate 24VAC transformer must be used for those specific legacy applications.
Will this work for a heat pump system?
The T201-FP is designed for single-stage heating only. It does not provide the O/B reversing valve terminals or compressor/fan logic required for heat pump operations.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For contractors managing residential or light commercial heating-only installations, the Schneider Electric (Erie) T201-FP Digital Thermostat offers a rugged, straightforward solution for single-stage 24VAC systems. This non-programmable unit is specifically engineered for high-reliability environments such as boilers, unit heaters, and hydronic heating where fan control or changeover is not required. It features a broad operating temperature range of 50°F to 86°F and a vertical mounting profile that simplifies field replacement. The integrated freeze protection provides a mechanical contact to latch the heat output at 40°F, ensuring critical system safety during equipment failure or extreme cold. With field-selectable 1°F or 2°F heating differentials and a 5-minute jumper-selectable short-cycle delay, technicians can fine-tune temperature control to prevent equipment wear and maintain steady comfort levels.
Key Benefits for the Contractor
- Freeze Protection Safety: Built-in mechanical contact triggers at 40°F to protect plumbing and HVAC components from freezing.
- Optimized Cycle Control: Selectable heating differentials and a legacy 5-minute short cycle delay extend the service life of burners and pumps.
- Contractor-Friendly Installation: Separate wall plate allows for simplified field wiring and includes a base adapter plate to cover previous footprints.
- Universal 24VAC Compatibility: Standard 2-wire RH/W terminal identification fits seamlessly into most heat-only thermostat wiring configurations.
- Durable Construction: Built with rigid vinyl and an off-white finish for longevity in utility rooms or commercial spaces.
Common Questions
Does this unit require a common wire?
Yes, this is a powered Schneider Electric HVAC thermostat that must receive at least 75mA of power at all times. A 250-ohm, 5-watt resistor may be required if the furnace or boiler control board does not provide sufficient current draw across the W and C terminals.
Can I use the T201-FP with a millivolt system?
This 24Vac digital thermostat cannot operate directly with 750mV or millivolt gas heating systems. An isolation relay and separate 24VAC transformer must be used for those specific legacy applications.
Will this work for a heat pump system?
The T201-FP is designed for single-stage heating only. It does not provide the O/B reversing valve terminals or compressor/fan logic required for heat pump operations.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
