Rotom Motor FB-RFB501 Inducer
The Rotom Motor FB-RFB501 Inducer is a rugged, single-speed replacement solution engineered for high-demand residential heating applications. This 1/16HP 115V 1SPD draft inducer is built with a shaded pole motor design, operating at approximately 3000 RPM to facilitate critical combustion air movement. Designed specifically as a direct cross-reference for widespread Goodman furnace parts (including OEM numbers 22307501 and 0171M00001S), this unit features a ball bearing construction to ensure lower friction and superior thermal management compared to sleeve-bearing alternatives. Technicians should note that this specific flue exhaust blower housing is optimized for installations where the discharge is positioned lower than the motor to facilitate proper condensate drainage. Integrating a furnace draft inducer motor like the FB-RFB501 ensures precise static pressure levels are met, preventing pressure switch tripping and maintaining safe flue gas ventilation. This aftermarket assembly delivers 2.80 Amps and utilizes a CCW shaft-end rotation for seamless integration into HVAC inducer replacement workflows.
Key Benefits- Broad Compatibility: Efficiently replaces multiple OEM part numbers, including 7058-2108, J238-150-15293, and Packard 66071.
- Enhanced Durability: Equipped with dual ball bearings for extended service life in high-temperature flue environments.
- Precision Airflow: High-speed 3000 RPM operation ensures consistent combustion blower performance and reliable ignition cycles.
- Streamlined Installation: Direct-fit mechanical footprint reduces field-modification time during emergency service calls.
Is the mounting gasket included with this motor?
Standard packaging for the FB-RFB501 usually does not include a gasket. It is recommended to use a new high-temp silicone or fiberglass gasket during installation to maintain an airtight seal at the furnace collector box.
Will this work for vertical discharge configurations?
The current housing design for this HVAC draft inducer is best suited for applications where moisture can drain away from the motor. For vertical-up discharge where a drain port is required, verify if the Fasco A180 is a more compatible match for your specific drainage layout.
Can I use this to replace a different horsepower rating?
This 1/16 HP motor is specifically calibrated for systems requiring this exact torque and RPM. Replacing a lower-rated (e.g., 1/20 HP) or higher-rated motor should only be done if the specific furnace model cross-references directly to the FB-RFB501 to avoid over-amping or pressure switch issues.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $163.71
-65%$163.71
$57.30Rotom Motor FB-RFB501 Inducer
The Rotom Motor FB-RFB501 Inducer is a rugged, single-speed replacement solution engineered for high-demand residential heating applications. This 1/16HP 115V 1SPD draft inducer is built with a shaded pole motor design, operating at approximately 3000 RPM to facilitate critical combustion air movement. Designed specifically as a direct cross-reference for widespread Goodman furnace parts (including OEM numbers 22307501 and 0171M00001S), this unit features a ball bearing construction to ensure lower friction and superior thermal management compared to sleeve-bearing alternatives. Technicians should note that this specific flue exhaust blower housing is optimized for installations where the discharge is positioned lower than the motor to facilitate proper condensate drainage. Integrating a furnace draft inducer motor like the FB-RFB501 ensures precise static pressure levels are met, preventing pressure switch tripping and maintaining safe flue gas ventilation. This aftermarket assembly delivers 2.80 Amps and utilizes a CCW shaft-end rotation for seamless integration into HVAC inducer replacement workflows.
Key Benefits- Broad Compatibility: Efficiently replaces multiple OEM part numbers, including 7058-2108, J238-150-15293, and Packard 66071.
- Enhanced Durability: Equipped with dual ball bearings for extended service life in high-temperature flue environments.
- Precision Airflow: High-speed 3000 RPM operation ensures consistent combustion blower performance and reliable ignition cycles.
- Streamlined Installation: Direct-fit mechanical footprint reduces field-modification time during emergency service calls.
Is the mounting gasket included with this motor?
Standard packaging for the FB-RFB501 usually does not include a gasket. It is recommended to use a new high-temp silicone or fiberglass gasket during installation to maintain an airtight seal at the furnace collector box.
Will this work for vertical discharge configurations?
The current housing design for this HVAC draft inducer is best suited for applications where moisture can drain away from the motor. For vertical-up discharge where a drain port is required, verify if the Fasco A180 is a more compatible match for your specific drainage layout.
Can I use this to replace a different horsepower rating?
This 1/16 HP motor is specifically calibrated for systems requiring this exact torque and RPM. Replacing a lower-rated (e.g., 1/20 HP) or higher-rated motor should only be done if the specific furnace model cross-references directly to the FB-RFB501 to avoid over-amping or pressure switch issues.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rotom Motor FB-RFB501 Inducer is a rugged, single-speed replacement solution engineered for high-demand residential heating applications. This 1/16HP 115V 1SPD draft inducer is built with a shaded pole motor design, operating at approximately 3000 RPM to facilitate critical combustion air movement. Designed specifically as a direct cross-reference for widespread Goodman furnace parts (including OEM numbers 22307501 and 0171M00001S), this unit features a ball bearing construction to ensure lower friction and superior thermal management compared to sleeve-bearing alternatives. Technicians should note that this specific flue exhaust blower housing is optimized for installations where the discharge is positioned lower than the motor to facilitate proper condensate drainage. Integrating a furnace draft inducer motor like the FB-RFB501 ensures precise static pressure levels are met, preventing pressure switch tripping and maintaining safe flue gas ventilation. This aftermarket assembly delivers 2.80 Amps and utilizes a CCW shaft-end rotation for seamless integration into HVAC inducer replacement workflows.
Key Benefits- Broad Compatibility: Efficiently replaces multiple OEM part numbers, including 7058-2108, J238-150-15293, and Packard 66071.
- Enhanced Durability: Equipped with dual ball bearings for extended service life in high-temperature flue environments.
- Precision Airflow: High-speed 3000 RPM operation ensures consistent combustion blower performance and reliable ignition cycles.
- Streamlined Installation: Direct-fit mechanical footprint reduces field-modification time during emergency service calls.
Is the mounting gasket included with this motor?
Standard packaging for the FB-RFB501 usually does not include a gasket. It is recommended to use a new high-temp silicone or fiberglass gasket during installation to maintain an airtight seal at the furnace collector box.
Will this work for vertical discharge configurations?
The current housing design for this HVAC draft inducer is best suited for applications where moisture can drain away from the motor. For vertical-up discharge where a drain port is required, verify if the Fasco A180 is a more compatible match for your specific drainage layout.
Can I use this to replace a different horsepower rating?
This 1/16 HP motor is specifically calibrated for systems requiring this exact torque and RPM. Replacing a lower-rated (e.g., 1/20 HP) or higher-rated motor should only be done if the specific furnace model cross-references directly to the FB-RFB501 to avoid over-amping or pressure switch issues.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
