Rotom Motor CP-R1354 Motor
The Rotom Motor CP-R1354 is a professional-grade circulator pump replacement motor designed for demanding hydronic heating and booster pump applications. Engineered as a direct aftermarket high-torque solution, this 1/4 HP 115V 1725 RPM motor features a robust 48-frame design with a rolled steel frame and an aluminum flange to ensure maximum heat dissipation and corrosion resistance in mechanical rooms. Operating at a 5A full-load current, it utilizes a split-phase electrical design and automatic overload protection to prevent winding failure during high-head pressure scenarios. This ODP (Open Drip Proof) enclosure motor is a primary cross-reference for the Bell & Gossett 111040 and Armstrong 817025-007, providing a seamless fit for hot water boiler pumps. With reversible rotation capabilities and a standard 1/2-inch shaft, this NEMA 48 frame motor allows contractors to maintain system flow rates and temperature regulation without the need for extensive piping modifications.
Key Benefits- Direct Cross-Compatibility: Exact dimensional match for Bell & Gossett 111040, Armstrong 831002-061, and M10532 models.
- Industrial-Grade Construction: Features sleeve bearings and a rolled steel body for quiet operation and long-term structural integrity.
- Enhanced Safety: Built-in auto-reset thermal overload protection prevents motor burnout during locked-rotor conditions.
- Versatile Mounting: Standard bracket mounting and a 5-inch bolt circle ensure rapid swap-outs on existing circulator pump assemblies.
- Efficient Fluid Circulation: Optimized for 1725 RPM to maintain consistent GPM flow in residential and light commercial HVAC loops.
Is the CP-R1354 compatible with variable speed controllers?
This is a single-speed split-phase motor designed for constant-duty cycles. For applications requiring modulation, verify that your controller is rated for single-phase induction motors to avoid harmonic overheating.
Can this motor be used in high-head booster pump applications?
Yes, the 1/4 HP rating and 5.0 Amp draw provide sufficient torque for standard hot water booster pumps and system circulators commonly found in hydronic configurations.
How do I change the rotation of the motor?
The Rotom CP-R1354 is electrically reversible. Always refer to the connection diagram on the motor nameplate to switch between CW and CCW lead configurations before finalizing the installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $314.09
-65%$314.09
$109.93Rotom Motor CP-R1354 Motor
The Rotom Motor CP-R1354 is a professional-grade circulator pump replacement motor designed for demanding hydronic heating and booster pump applications. Engineered as a direct aftermarket high-torque solution, this 1/4 HP 115V 1725 RPM motor features a robust 48-frame design with a rolled steel frame and an aluminum flange to ensure maximum heat dissipation and corrosion resistance in mechanical rooms. Operating at a 5A full-load current, it utilizes a split-phase electrical design and automatic overload protection to prevent winding failure during high-head pressure scenarios. This ODP (Open Drip Proof) enclosure motor is a primary cross-reference for the Bell & Gossett 111040 and Armstrong 817025-007, providing a seamless fit for hot water boiler pumps. With reversible rotation capabilities and a standard 1/2-inch shaft, this NEMA 48 frame motor allows contractors to maintain system flow rates and temperature regulation without the need for extensive piping modifications.
Key Benefits- Direct Cross-Compatibility: Exact dimensional match for Bell & Gossett 111040, Armstrong 831002-061, and M10532 models.
- Industrial-Grade Construction: Features sleeve bearings and a rolled steel body for quiet operation and long-term structural integrity.
- Enhanced Safety: Built-in auto-reset thermal overload protection prevents motor burnout during locked-rotor conditions.
- Versatile Mounting: Standard bracket mounting and a 5-inch bolt circle ensure rapid swap-outs on existing circulator pump assemblies.
- Efficient Fluid Circulation: Optimized for 1725 RPM to maintain consistent GPM flow in residential and light commercial HVAC loops.
Is the CP-R1354 compatible with variable speed controllers?
This is a single-speed split-phase motor designed for constant-duty cycles. For applications requiring modulation, verify that your controller is rated for single-phase induction motors to avoid harmonic overheating.
Can this motor be used in high-head booster pump applications?
Yes, the 1/4 HP rating and 5.0 Amp draw provide sufficient torque for standard hot water booster pumps and system circulators commonly found in hydronic configurations.
How do I change the rotation of the motor?
The Rotom CP-R1354 is electrically reversible. Always refer to the connection diagram on the motor nameplate to switch between CW and CCW lead configurations before finalizing the installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rotom Motor CP-R1354 is a professional-grade circulator pump replacement motor designed for demanding hydronic heating and booster pump applications. Engineered as a direct aftermarket high-torque solution, this 1/4 HP 115V 1725 RPM motor features a robust 48-frame design with a rolled steel frame and an aluminum flange to ensure maximum heat dissipation and corrosion resistance in mechanical rooms. Operating at a 5A full-load current, it utilizes a split-phase electrical design and automatic overload protection to prevent winding failure during high-head pressure scenarios. This ODP (Open Drip Proof) enclosure motor is a primary cross-reference for the Bell & Gossett 111040 and Armstrong 817025-007, providing a seamless fit for hot water boiler pumps. With reversible rotation capabilities and a standard 1/2-inch shaft, this NEMA 48 frame motor allows contractors to maintain system flow rates and temperature regulation without the need for extensive piping modifications.
Key Benefits- Direct Cross-Compatibility: Exact dimensional match for Bell & Gossett 111040, Armstrong 831002-061, and M10532 models.
- Industrial-Grade Construction: Features sleeve bearings and a rolled steel body for quiet operation and long-term structural integrity.
- Enhanced Safety: Built-in auto-reset thermal overload protection prevents motor burnout during locked-rotor conditions.
- Versatile Mounting: Standard bracket mounting and a 5-inch bolt circle ensure rapid swap-outs on existing circulator pump assemblies.
- Efficient Fluid Circulation: Optimized for 1725 RPM to maintain consistent GPM flow in residential and light commercial HVAC loops.
Is the CP-R1354 compatible with variable speed controllers?
This is a single-speed split-phase motor designed for constant-duty cycles. For applications requiring modulation, verify that your controller is rated for single-phase induction motors to avoid harmonic overheating.
Can this motor be used in high-head booster pump applications?
Yes, the 1/4 HP rating and 5.0 Amp draw provide sufficient torque for standard hot water booster pumps and system circulators commonly found in hydronic configurations.
How do I change the rotation of the motor?
The Rotom CP-R1354 is electrically reversible. Always refer to the connection diagram on the motor nameplate to switch between CW and CCW lead configurations before finalizing the installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
