Resideo THX321WFS2001W Thermostat
When you're out in the field servicing a Trane air handler or furnace, you need a high-performance direct drive motor that matches the factory specifications exactly to maintain system static pressure and airflow ratings. The Trane SFX2703 Blower Motor is an OEM motor designed for 115V/60Hz applications, delivering a robust 1/2 HP output to ensure consistent CFM across the ductwork. As a veteran technician, you know that using anything other than an OEM Trane replacement motor can lead to mounting issues or incorrect fan speed profiles that compromise efficiency.
This motor features a standard 48-frame design with a 1/2" shaft, making it a drop-in replacement for failed blower units in many residential split systems. The 1075 RPM rating is critical for matching the original blower wheel balance and performance curve. Integrating this HVAC blower motor eliminates the guesswork of universal cross-referencing, providing the correct electrical lead lengths and connector plugs for a fast, "one-and-done" service call. Field-tested for high-demand environments, this condenser fan and blower motor solution preserves the integrity of the original air conditioning or heating system without the risk of common aftermarket vibration issues.
Key Benefits for the Contractor:- Matches OEM HVAC replacement part specifications for a seamless mechanical and electrical fit.
- Operates at 115 Volts with a high-torque 1/2 Horsepower rating to handle system-specific static loads.
- Maintains factory 1075 RPM speed for precise airflow and noise attenuation within the cabinet.
- Durable 48-frame construction ensures compatibility with standard Trane motor mounts and brackets.
- Direct-drive design reduces mechanical energy loss and simplifies the installation process.
Is the capacitor included with the Trane SFX2703?
Standard field practice dictates replacing the run capacitor whenever a new motor is installed. Always check the nameplate on the SFX2703 for the required MFD rating (typically 5uF or 10uF at 370V) to ensure the motor starts and runs within the correct amperage range.
Can I use this as a replacement for a 230V system?
No. The Trane SFX2703 is rated strictly for 115V single-phase power. Connecting this unit to a 230V line will result in immediate winding failure. Always verify the incoming voltage at the motor leads before installation.
What are the signs of a failing Trane blower motor?
Contractors often encounter furnace motor humming but not spinning or a distinct electrical burning smell. If the blower motor bearings are worn, you will notice increased noise or a locked rotor condition that trips the circuit breaker.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $314.58
-65%$314.58
$110.10Resideo THX321WFS2001W Thermostat
When you're out in the field servicing a Trane air handler or furnace, you need a high-performance direct drive motor that matches the factory specifications exactly to maintain system static pressure and airflow ratings. The Trane SFX2703 Blower Motor is an OEM motor designed for 115V/60Hz applications, delivering a robust 1/2 HP output to ensure consistent CFM across the ductwork. As a veteran technician, you know that using anything other than an OEM Trane replacement motor can lead to mounting issues or incorrect fan speed profiles that compromise efficiency.
This motor features a standard 48-frame design with a 1/2" shaft, making it a drop-in replacement for failed blower units in many residential split systems. The 1075 RPM rating is critical for matching the original blower wheel balance and performance curve. Integrating this HVAC blower motor eliminates the guesswork of universal cross-referencing, providing the correct electrical lead lengths and connector plugs for a fast, "one-and-done" service call. Field-tested for high-demand environments, this condenser fan and blower motor solution preserves the integrity of the original air conditioning or heating system without the risk of common aftermarket vibration issues.
Key Benefits for the Contractor:- Matches OEM HVAC replacement part specifications for a seamless mechanical and electrical fit.
- Operates at 115 Volts with a high-torque 1/2 Horsepower rating to handle system-specific static loads.
- Maintains factory 1075 RPM speed for precise airflow and noise attenuation within the cabinet.
- Durable 48-frame construction ensures compatibility with standard Trane motor mounts and brackets.
- Direct-drive design reduces mechanical energy loss and simplifies the installation process.
Is the capacitor included with the Trane SFX2703?
Standard field practice dictates replacing the run capacitor whenever a new motor is installed. Always check the nameplate on the SFX2703 for the required MFD rating (typically 5uF or 10uF at 370V) to ensure the motor starts and runs within the correct amperage range.
Can I use this as a replacement for a 230V system?
No. The Trane SFX2703 is rated strictly for 115V single-phase power. Connecting this unit to a 230V line will result in immediate winding failure. Always verify the incoming voltage at the motor leads before installation.
What are the signs of a failing Trane blower motor?
Contractors often encounter furnace motor humming but not spinning or a distinct electrical burning smell. If the blower motor bearings are worn, you will notice increased noise or a locked rotor condition that trips the circuit breaker.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're out in the field servicing a Trane air handler or furnace, you need a high-performance direct drive motor that matches the factory specifications exactly to maintain system static pressure and airflow ratings. The Trane SFX2703 Blower Motor is an OEM motor designed for 115V/60Hz applications, delivering a robust 1/2 HP output to ensure consistent CFM across the ductwork. As a veteran technician, you know that using anything other than an OEM Trane replacement motor can lead to mounting issues or incorrect fan speed profiles that compromise efficiency.
This motor features a standard 48-frame design with a 1/2" shaft, making it a drop-in replacement for failed blower units in many residential split systems. The 1075 RPM rating is critical for matching the original blower wheel balance and performance curve. Integrating this HVAC blower motor eliminates the guesswork of universal cross-referencing, providing the correct electrical lead lengths and connector plugs for a fast, "one-and-done" service call. Field-tested for high-demand environments, this condenser fan and blower motor solution preserves the integrity of the original air conditioning or heating system without the risk of common aftermarket vibration issues.
Key Benefits for the Contractor:- Matches OEM HVAC replacement part specifications for a seamless mechanical and electrical fit.
- Operates at 115 Volts with a high-torque 1/2 Horsepower rating to handle system-specific static loads.
- Maintains factory 1075 RPM speed for precise airflow and noise attenuation within the cabinet.
- Durable 48-frame construction ensures compatibility with standard Trane motor mounts and brackets.
- Direct-drive design reduces mechanical energy loss and simplifies the installation process.
Is the capacitor included with the Trane SFX2703?
Standard field practice dictates replacing the run capacitor whenever a new motor is installed. Always check the nameplate on the SFX2703 for the required MFD rating (typically 5uF or 10uF at 370V) to ensure the motor starts and runs within the correct amperage range.
Can I use this as a replacement for a 230V system?
No. The Trane SFX2703 is rated strictly for 115V single-phase power. Connecting this unit to a 230V line will result in immediate winding failure. Always verify the incoming voltage at the motor leads before installation.
What are the signs of a failing Trane blower motor?
Contractors often encounter furnace motor humming but not spinning or a distinct electrical burning smell. If the blower motor bearings are worn, you will notice increased noise or a locked rotor condition that trips the circuit breaker.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
