Neptronic AM000 Actuator
The Neptronic AM000 Actuator is a non-spring return motor designed for precise control of dampers and valves in commercial HVAC systems. Operating on a 24Vac or 30Vdc power supply, this actuator provides a torque of 360 in-lb (40 Nm), making it suitable for large-scale air handling units and complex ductwork configurations. The unit supports multiple control signals, including 2-10Vdc and 4-20mA modulating control, allowing for seamless integration with high-end Building Automation Systems (BAS). Its IP54-rated housing ensures durability in mechanical rooms, while the manual override button facilitates effortless commissioning and emergency positioning. Technicians can rely on the brushless DC motor for consistent timing and reduced maintenance cycles compared to traditional brushed alternatives. This model is engineered for high-duty cycle applications where precise positioning and reliable feedback are critical for system balancing and energy efficiency.
Key Benefits
- Compatible with 24V HVAC control systems using standard analog input signals for versatile field installation.
- Delivers high torque performance capable of driving large dampers without the risk of stall or gear failure.
- Features a selectable direction of rotation (CW/CCW) via an internal switch to accommodate various mounting orientations.
- Equipped with an external clutch for manual positioning when power is disconnected or during initial setup.
- Designed with low power consumption electronics to minimize transformer sizing requirements across the job site.
Common Questions
How do I switch between 2-10Vdc and 4-20mA control on the Neptronic AM000?
Signal selection is typically managed via internal dip switches or jumpers. For 4-20mA operation, a 500-ohm resistor is often required across the input terminals if not natively integrated into the control board logic.
Can the AM000 be used in outdoor applications?
The unit features an IP54 enclosure, protecting against dust and splashing water. For direct exposure to harsh weather or heavy wash-down areas, a secondary NEMA 4 rated weather shield is recommended for long-term reliability.
What is the typical stroke timing for this actuator under full load?
The AM000 is engineered for a consistent travel speed, generally operating at 90 to 120 seconds for a full 90-degree rotation, ensuring smooth modulation and preventing static pressure spikes in the ductwork.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Neptronic AM000 Actuator
The Neptronic AM000 Actuator is a non-spring return motor designed for precise control of dampers and valves in commercial HVAC systems. Operating on a 24Vac or 30Vdc power supply, this actuator provides a torque of 360 in-lb (40 Nm), making it suitable for large-scale air handling units and complex ductwork configurations. The unit supports multiple control signals, including 2-10Vdc and 4-20mA modulating control, allowing for seamless integration with high-end Building Automation Systems (BAS). Its IP54-rated housing ensures durability in mechanical rooms, while the manual override button facilitates effortless commissioning and emergency positioning. Technicians can rely on the brushless DC motor for consistent timing and reduced maintenance cycles compared to traditional brushed alternatives. This model is engineered for high-duty cycle applications where precise positioning and reliable feedback are critical for system balancing and energy efficiency.
Key Benefits
- Compatible with 24V HVAC control systems using standard analog input signals for versatile field installation.
- Delivers high torque performance capable of driving large dampers without the risk of stall or gear failure.
- Features a selectable direction of rotation (CW/CCW) via an internal switch to accommodate various mounting orientations.
- Equipped with an external clutch for manual positioning when power is disconnected or during initial setup.
- Designed with low power consumption electronics to minimize transformer sizing requirements across the job site.
Common Questions
How do I switch between 2-10Vdc and 4-20mA control on the Neptronic AM000?
Signal selection is typically managed via internal dip switches or jumpers. For 4-20mA operation, a 500-ohm resistor is often required across the input terminals if not natively integrated into the control board logic.
Can the AM000 be used in outdoor applications?
The unit features an IP54 enclosure, protecting against dust and splashing water. For direct exposure to harsh weather or heavy wash-down areas, a secondary NEMA 4 rated weather shield is recommended for long-term reliability.
What is the typical stroke timing for this actuator under full load?
The AM000 is engineered for a consistent travel speed, generally operating at 90 to 120 seconds for a full 90-degree rotation, ensuring smooth modulation and preventing static pressure spikes in the ductwork.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Neptronic AM000 Actuator is a non-spring return motor designed for precise control of dampers and valves in commercial HVAC systems. Operating on a 24Vac or 30Vdc power supply, this actuator provides a torque of 360 in-lb (40 Nm), making it suitable for large-scale air handling units and complex ductwork configurations. The unit supports multiple control signals, including 2-10Vdc and 4-20mA modulating control, allowing for seamless integration with high-end Building Automation Systems (BAS). Its IP54-rated housing ensures durability in mechanical rooms, while the manual override button facilitates effortless commissioning and emergency positioning. Technicians can rely on the brushless DC motor for consistent timing and reduced maintenance cycles compared to traditional brushed alternatives. This model is engineered for high-duty cycle applications where precise positioning and reliable feedback are critical for system balancing and energy efficiency.
Key Benefits
- Compatible with 24V HVAC control systems using standard analog input signals for versatile field installation.
- Delivers high torque performance capable of driving large dampers without the risk of stall or gear failure.
- Features a selectable direction of rotation (CW/CCW) via an internal switch to accommodate various mounting orientations.
- Equipped with an external clutch for manual positioning when power is disconnected or during initial setup.
- Designed with low power consumption electronics to minimize transformer sizing requirements across the job site.
Common Questions
How do I switch between 2-10Vdc and 4-20mA control on the Neptronic AM000?
Signal selection is typically managed via internal dip switches or jumpers. For 4-20mA operation, a 500-ohm resistor is often required across the input terminals if not natively integrated into the control board logic.
Can the AM000 be used in outdoor applications?
The unit features an IP54 enclosure, protecting against dust and splashing water. For direct exposure to harsh weather or heavy wash-down areas, a secondary NEMA 4 rated weather shield is recommended for long-term reliability.
What is the typical stroke timing for this actuator under full load?
The AM000 is engineered for a consistent travel speed, generally operating at 90 to 120 seconds for a full 90-degree rotation, ensuring smooth modulation and preventing static pressure spikes in the ductwork.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
