Laars Heating Systems RE2076500 Low Water Cut-out
The Laars RE2076500 Low Water Cut-out is a critical safety component engineered to prevent dry firing and catastrophic heat exchanger failure in high-efficiency hydronic systems. As a genuine Laars replacement part, this LWCO switch monitors internal water levels and immediately interrupts the burner circuit if levels drop below the safe threshold. This boiler safety device is essential for maintaining the operational integrity of Laars NeoTherm, Mascot LX, and Mascot FT series boilers, as well as Mini-Therm and Mega-Therm models. Designed for professional integration, the low water cutoff features a robust sensor probe or float mechanism (depending on the specific series application) to ensure reliable continuity or break-on-fall performance under demanding commercial and residential conditions.
When performing boiler maintenance or responding to a system lockout, replacing a fouled or unresponsive water level sensor is the standard procedure to avoid dry-fire damage. The RE2076500 provides precise low water detection, protecting the cast iron or stainless steel heat exchangers from warping or cracking. This part is a direct OEM replacement for Laars heating systems, ensuring the electrical leads and mounting points align perfectly with the original equipment manufacturer specifications for NeoTherm LC and other compatible hydronic units.
Key Benefits- System Protection: Effectively prevents dry firing, which can lead to expensive heat exchanger replacements or total system failure.
- OEM Compatibility: Specifically designed for the Laars NeoTherm, Mascot, and Mini-Therm boiler lines, ensuring accurate electrical signaling.
- Safety Compliance: Meets strict safety standards for hydronic heating systems requiring a primary or secondary low water cut-off.
- Durable Construction: Built with high-grade components to resist scale buildup and corrosion common in hydronic loops.
Which Laars boiler models is the RE2076500 compatible with?
This low water cut-out is compatible with Laars NeoTherm (NTH/NTV), Mascot LX, Mascot FT, Mini-Therm (JVS/JVT), and Mega-Therm models. Always check your specific manual to confirm the part number matches the series and size of your unit.
How do I know if my LWCO needs to be replaced?
Common indicators include persistent low-water lockouts despite adequate system pressure, visible corrosion on the probe, or a failure to trip during a periodic "slow drain" test. SCALE buildup on the sensing element is a frequent cause of failure in older systems.
Is this a probe-style or float-style cut-out?
The RE2076500 is typically utilized as an electronic probe-style sensor in modern NeoTherm units, though its specific mechanical action depends on the legacy or current model of the Laars heating system it is replacing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $520.90
-65%$520.90
$182.31Laars Heating Systems RE2076500 Low Water Cut-out
The Laars RE2076500 Low Water Cut-out is a critical safety component engineered to prevent dry firing and catastrophic heat exchanger failure in high-efficiency hydronic systems. As a genuine Laars replacement part, this LWCO switch monitors internal water levels and immediately interrupts the burner circuit if levels drop below the safe threshold. This boiler safety device is essential for maintaining the operational integrity of Laars NeoTherm, Mascot LX, and Mascot FT series boilers, as well as Mini-Therm and Mega-Therm models. Designed for professional integration, the low water cutoff features a robust sensor probe or float mechanism (depending on the specific series application) to ensure reliable continuity or break-on-fall performance under demanding commercial and residential conditions.
When performing boiler maintenance or responding to a system lockout, replacing a fouled or unresponsive water level sensor is the standard procedure to avoid dry-fire damage. The RE2076500 provides precise low water detection, protecting the cast iron or stainless steel heat exchangers from warping or cracking. This part is a direct OEM replacement for Laars heating systems, ensuring the electrical leads and mounting points align perfectly with the original equipment manufacturer specifications for NeoTherm LC and other compatible hydronic units.
Key Benefits- System Protection: Effectively prevents dry firing, which can lead to expensive heat exchanger replacements or total system failure.
- OEM Compatibility: Specifically designed for the Laars NeoTherm, Mascot, and Mini-Therm boiler lines, ensuring accurate electrical signaling.
- Safety Compliance: Meets strict safety standards for hydronic heating systems requiring a primary or secondary low water cut-off.
- Durable Construction: Built with high-grade components to resist scale buildup and corrosion common in hydronic loops.
Which Laars boiler models is the RE2076500 compatible with?
This low water cut-out is compatible with Laars NeoTherm (NTH/NTV), Mascot LX, Mascot FT, Mini-Therm (JVS/JVT), and Mega-Therm models. Always check your specific manual to confirm the part number matches the series and size of your unit.
How do I know if my LWCO needs to be replaced?
Common indicators include persistent low-water lockouts despite adequate system pressure, visible corrosion on the probe, or a failure to trip during a periodic "slow drain" test. SCALE buildup on the sensing element is a frequent cause of failure in older systems.
Is this a probe-style or float-style cut-out?
The RE2076500 is typically utilized as an electronic probe-style sensor in modern NeoTherm units, though its specific mechanical action depends on the legacy or current model of the Laars heating system it is replacing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Laars RE2076500 Low Water Cut-out is a critical safety component engineered to prevent dry firing and catastrophic heat exchanger failure in high-efficiency hydronic systems. As a genuine Laars replacement part, this LWCO switch monitors internal water levels and immediately interrupts the burner circuit if levels drop below the safe threshold. This boiler safety device is essential for maintaining the operational integrity of Laars NeoTherm, Mascot LX, and Mascot FT series boilers, as well as Mini-Therm and Mega-Therm models. Designed for professional integration, the low water cutoff features a robust sensor probe or float mechanism (depending on the specific series application) to ensure reliable continuity or break-on-fall performance under demanding commercial and residential conditions.
When performing boiler maintenance or responding to a system lockout, replacing a fouled or unresponsive water level sensor is the standard procedure to avoid dry-fire damage. The RE2076500 provides precise low water detection, protecting the cast iron or stainless steel heat exchangers from warping or cracking. This part is a direct OEM replacement for Laars heating systems, ensuring the electrical leads and mounting points align perfectly with the original equipment manufacturer specifications for NeoTherm LC and other compatible hydronic units.
Key Benefits- System Protection: Effectively prevents dry firing, which can lead to expensive heat exchanger replacements or total system failure.
- OEM Compatibility: Specifically designed for the Laars NeoTherm, Mascot, and Mini-Therm boiler lines, ensuring accurate electrical signaling.
- Safety Compliance: Meets strict safety standards for hydronic heating systems requiring a primary or secondary low water cut-off.
- Durable Construction: Built with high-grade components to resist scale buildup and corrosion common in hydronic loops.
Which Laars boiler models is the RE2076500 compatible with?
This low water cut-out is compatible with Laars NeoTherm (NTH/NTV), Mascot LX, Mascot FT, Mini-Therm (JVS/JVT), and Mega-Therm models. Always check your specific manual to confirm the part number matches the series and size of your unit.
How do I know if my LWCO needs to be replaced?
Common indicators include persistent low-water lockouts despite adequate system pressure, visible corrosion on the probe, or a failure to trip during a periodic "slow drain" test. SCALE buildup on the sensing element is a frequent cause of failure in older systems.
Is this a probe-style or float-style cut-out?
The RE2076500 is typically utilized as an electronic probe-style sensor in modern NeoTherm units, though its specific mechanical action depends on the legacy or current model of the Laars heating system it is replacing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
