Laars Heating Systems 2400-526 Ignitor/Flame Sensor & Gasket
The Laars Heating Systems 2400-526 Ignitor/Flame Sensor & Gasket is a critical replacement component for maintaining the ignition sequence and flame rectifying circuit in Laars Endurance EBP and ED series boilers. This integrated assembly serves a dual purpose: providing high-energy ignition and monitoring the burner flame to ensure safe operation. As a hot surface ignitor, it eliminates the inefficiencies of standing pilots, while the included high-temperature gasket ensures a combustion-tight seal against the mounting plate to prevent flue gas leakage. When troubleshooting Laars boiler lockout codes or intermittent firing issues, replacing this assembly is often the first step in restoring system reliability.
For service technicians, the Laars 2400-526 is the standard OEM replacement part for EBP110 and other Endurance hydronic boiler models. The sensor rod is engineered to withstand the thermal stress of constant cycling, sending a microamp signal back to the ignition control module once the flame is established. Replacing the gasket during every ignitor service is industry best practice to avoid bypass air that can lead to poor combustion or sensor fouling. This wire ignitor flame sensor kit provides everything needed for a standard field replacement, ensuring the burner ignites reliably during every 40-second warm-up cycle.
Key Benefits:- OEM Compatibility: Specifically engineered for Laars Endurance EBP and ED series residential and commercial boilers.
- Dual-Function Design: Consolidates the hot surface ignitor and flame sensor into a single mounting point for streamlined replacement.
- Combustion Integrity: Includes a replacement gasket to maintain a vacuum-tight seal, preventing carbon monoxide leaks and ensuring stable flame detection.
- Direct Drop-In Fit: Standardized wiring harness and mounting holes allow for a 10-minute field swap without internal modifications.
- Will this fix a 'LO' Lockout code on my Laars boiler? Yes, a faulty 2400-526 is a common cause of Ignition Failure (LO) lockouts when the system cannot sense a flame after the trial for ignition.
- Is the gasket necessary for installation? Absolutely. Using the 2400-526 gasket is vital to prevent heat damage to the wire leads and ensure proper manifold pressure isn't compromised.
- Can I use this for the Laars Lite 2 pool heater? While similar, this specific part number is optimized for the Endurance series. Always verify the part number in your specific equipment manual before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $197.60
-65%$197.60
$69.16Laars Heating Systems 2400-526 Ignitor/Flame Sensor & Gasket
The Laars Heating Systems 2400-526 Ignitor/Flame Sensor & Gasket is a critical replacement component for maintaining the ignition sequence and flame rectifying circuit in Laars Endurance EBP and ED series boilers. This integrated assembly serves a dual purpose: providing high-energy ignition and monitoring the burner flame to ensure safe operation. As a hot surface ignitor, it eliminates the inefficiencies of standing pilots, while the included high-temperature gasket ensures a combustion-tight seal against the mounting plate to prevent flue gas leakage. When troubleshooting Laars boiler lockout codes or intermittent firing issues, replacing this assembly is often the first step in restoring system reliability.
For service technicians, the Laars 2400-526 is the standard OEM replacement part for EBP110 and other Endurance hydronic boiler models. The sensor rod is engineered to withstand the thermal stress of constant cycling, sending a microamp signal back to the ignition control module once the flame is established. Replacing the gasket during every ignitor service is industry best practice to avoid bypass air that can lead to poor combustion or sensor fouling. This wire ignitor flame sensor kit provides everything needed for a standard field replacement, ensuring the burner ignites reliably during every 40-second warm-up cycle.
Key Benefits:- OEM Compatibility: Specifically engineered for Laars Endurance EBP and ED series residential and commercial boilers.
- Dual-Function Design: Consolidates the hot surface ignitor and flame sensor into a single mounting point for streamlined replacement.
- Combustion Integrity: Includes a replacement gasket to maintain a vacuum-tight seal, preventing carbon monoxide leaks and ensuring stable flame detection.
- Direct Drop-In Fit: Standardized wiring harness and mounting holes allow for a 10-minute field swap without internal modifications.
- Will this fix a 'LO' Lockout code on my Laars boiler? Yes, a faulty 2400-526 is a common cause of Ignition Failure (LO) lockouts when the system cannot sense a flame after the trial for ignition.
- Is the gasket necessary for installation? Absolutely. Using the 2400-526 gasket is vital to prevent heat damage to the wire leads and ensure proper manifold pressure isn't compromised.
- Can I use this for the Laars Lite 2 pool heater? While similar, this specific part number is optimized for the Endurance series. Always verify the part number in your specific equipment manual before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Laars Heating Systems 2400-526 Ignitor/Flame Sensor & Gasket is a critical replacement component for maintaining the ignition sequence and flame rectifying circuit in Laars Endurance EBP and ED series boilers. This integrated assembly serves a dual purpose: providing high-energy ignition and monitoring the burner flame to ensure safe operation. As a hot surface ignitor, it eliminates the inefficiencies of standing pilots, while the included high-temperature gasket ensures a combustion-tight seal against the mounting plate to prevent flue gas leakage. When troubleshooting Laars boiler lockout codes or intermittent firing issues, replacing this assembly is often the first step in restoring system reliability.
For service technicians, the Laars 2400-526 is the standard OEM replacement part for EBP110 and other Endurance hydronic boiler models. The sensor rod is engineered to withstand the thermal stress of constant cycling, sending a microamp signal back to the ignition control module once the flame is established. Replacing the gasket during every ignitor service is industry best practice to avoid bypass air that can lead to poor combustion or sensor fouling. This wire ignitor flame sensor kit provides everything needed for a standard field replacement, ensuring the burner ignites reliably during every 40-second warm-up cycle.
Key Benefits:- OEM Compatibility: Specifically engineered for Laars Endurance EBP and ED series residential and commercial boilers.
- Dual-Function Design: Consolidates the hot surface ignitor and flame sensor into a single mounting point for streamlined replacement.
- Combustion Integrity: Includes a replacement gasket to maintain a vacuum-tight seal, preventing carbon monoxide leaks and ensuring stable flame detection.
- Direct Drop-In Fit: Standardized wiring harness and mounting holes allow for a 10-minute field swap without internal modifications.
- Will this fix a 'LO' Lockout code on my Laars boiler? Yes, a faulty 2400-526 is a common cause of Ignition Failure (LO) lockouts when the system cannot sense a flame after the trial for ignition.
- Is the gasket necessary for installation? Absolutely. Using the 2400-526 gasket is vital to prevent heat damage to the wire leads and ensure proper manifold pressure isn't compromised.
- Can I use this for the Laars Lite 2 pool heater? While similar, this specific part number is optimized for the Endurance series. Always verify the part number in your specific equipment manual before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
