Laars Heating Systems L2012200 Burner Assembly
The Laars Heating Systems L2012200 Burner Assembly is a high-duty 3-burner assembly engineered for precise combustion in residential and commercial hydronic applications. Designed as a direct OEM replacement burner for Laars PNCP pool heaters and compatible boilers, this stainless steel component ensures a controlled, uniform flame pattern to maximize thermal transfer and minimize fuel consumption. For technicians performing scheduled maintenance or emergency repairs, replacing a warped or clogged manifold with a factory-spec L2012200 is critical for restoring system efficiency and preventing soot accumulation or delayed ignition cycles.
Built to withstand high-temperature environments, the replacement burner assembly features a three-element configuration that stabilizes the atmospheric flame, essential for maintaining the target manifold pressure. Whether you are servicing a Laars pool heater or a compatible Teledyne Laars boiler unit, this assembly provides the structural integrity required for long-term operational reliability. Professional installation is required to verify proper gas-to-air ratios and ensure the combustion process remains within the manufacturer’s specified micro-amp range for flame rectification. Integrating this genuine HVAC replacement part ensures the system meets its original BTU output ratings without the risk of premature component failure associated with aftermarket alternatives.
Key Benefits
- Direct OEM Compatibility: Specifically designed for Laars PNCP model pool heaters and associated Teledyne Laars hydronic equipment.
- Optimized Combustion: The 3-element stainless steel design ensures even heat distribution across the heat exchanger, improving overall energy efficiency.
- Enhanced Durability: Resists thermal stress and corrosion, preventing common issues like port clogging or burner plate warping.
- Precise Flame Control: Engineered to facilitate stable ignition and reliable flame sensing for safety-critical control modules.
Common Questions
Is the L2012200 compatible with both Natural Gas and Propane units?
Compatibility depends on the orifice size and manifold configuration of your specific Laars heating system. Always verify the gas type and input rating on the appliance data plate before installing the burner assembly.
When should I replace my burner assembly?
Technicians should inspect for physical degradation, such as heavy oxidation, cracked ports, or a "lazy" yellow flame that persists after cleaning. Persistent ignition lockout codes often indicate it is time for a replacement burner assembly.
Can I use this for a 4-burner configuration?
No, this is a dedicated 3 burner assembly. Using an incorrect burner count will lead to improper combustion and potential safety hazards. For 4-port systems, utilize part number L2012500.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Laars Heating Systems L2012200 Burner Assembly
The Laars Heating Systems L2012200 Burner Assembly is a high-duty 3-burner assembly engineered for precise combustion in residential and commercial hydronic applications. Designed as a direct OEM replacement burner for Laars PNCP pool heaters and compatible boilers, this stainless steel component ensures a controlled, uniform flame pattern to maximize thermal transfer and minimize fuel consumption. For technicians performing scheduled maintenance or emergency repairs, replacing a warped or clogged manifold with a factory-spec L2012200 is critical for restoring system efficiency and preventing soot accumulation or delayed ignition cycles.
Built to withstand high-temperature environments, the replacement burner assembly features a three-element configuration that stabilizes the atmospheric flame, essential for maintaining the target manifold pressure. Whether you are servicing a Laars pool heater or a compatible Teledyne Laars boiler unit, this assembly provides the structural integrity required for long-term operational reliability. Professional installation is required to verify proper gas-to-air ratios and ensure the combustion process remains within the manufacturer’s specified micro-amp range for flame rectification. Integrating this genuine HVAC replacement part ensures the system meets its original BTU output ratings without the risk of premature component failure associated with aftermarket alternatives.
Key Benefits
- Direct OEM Compatibility: Specifically designed for Laars PNCP model pool heaters and associated Teledyne Laars hydronic equipment.
- Optimized Combustion: The 3-element stainless steel design ensures even heat distribution across the heat exchanger, improving overall energy efficiency.
- Enhanced Durability: Resists thermal stress and corrosion, preventing common issues like port clogging or burner plate warping.
- Precise Flame Control: Engineered to facilitate stable ignition and reliable flame sensing for safety-critical control modules.
Common Questions
Is the L2012200 compatible with both Natural Gas and Propane units?
Compatibility depends on the orifice size and manifold configuration of your specific Laars heating system. Always verify the gas type and input rating on the appliance data plate before installing the burner assembly.
When should I replace my burner assembly?
Technicians should inspect for physical degradation, such as heavy oxidation, cracked ports, or a "lazy" yellow flame that persists after cleaning. Persistent ignition lockout codes often indicate it is time for a replacement burner assembly.
Can I use this for a 4-burner configuration?
No, this is a dedicated 3 burner assembly. Using an incorrect burner count will lead to improper combustion and potential safety hazards. For 4-port systems, utilize part number L2012500.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Laars Heating Systems L2012200 Burner Assembly is a high-duty 3-burner assembly engineered for precise combustion in residential and commercial hydronic applications. Designed as a direct OEM replacement burner for Laars PNCP pool heaters and compatible boilers, this stainless steel component ensures a controlled, uniform flame pattern to maximize thermal transfer and minimize fuel consumption. For technicians performing scheduled maintenance or emergency repairs, replacing a warped or clogged manifold with a factory-spec L2012200 is critical for restoring system efficiency and preventing soot accumulation or delayed ignition cycles.
Built to withstand high-temperature environments, the replacement burner assembly features a three-element configuration that stabilizes the atmospheric flame, essential for maintaining the target manifold pressure. Whether you are servicing a Laars pool heater or a compatible Teledyne Laars boiler unit, this assembly provides the structural integrity required for long-term operational reliability. Professional installation is required to verify proper gas-to-air ratios and ensure the combustion process remains within the manufacturer’s specified micro-amp range for flame rectification. Integrating this genuine HVAC replacement part ensures the system meets its original BTU output ratings without the risk of premature component failure associated with aftermarket alternatives.
Key Benefits
- Direct OEM Compatibility: Specifically designed for Laars PNCP model pool heaters and associated Teledyne Laars hydronic equipment.
- Optimized Combustion: The 3-element stainless steel design ensures even heat distribution across the heat exchanger, improving overall energy efficiency.
- Enhanced Durability: Resists thermal stress and corrosion, preventing common issues like port clogging or burner plate warping.
- Precise Flame Control: Engineered to facilitate stable ignition and reliable flame sensing for safety-critical control modules.
Common Questions
Is the L2012200 compatible with both Natural Gas and Propane units?
Compatibility depends on the orifice size and manifold configuration of your specific Laars heating system. Always verify the gas type and input rating on the appliance data plate before installing the burner assembly.
When should I replace my burner assembly?
Technicians should inspect for physical degradation, such as heavy oxidation, cracked ports, or a "lazy" yellow flame that persists after cleaning. Persistent ignition lockout codes often indicate it is time for a replacement burner assembly.
Can I use this for a 4-burner configuration?
No, this is a dedicated 3 burner assembly. Using an incorrect burner count will lead to improper combustion and potential safety hazards. For 4-port systems, utilize part number L2012500.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
