Laars Heating Systems FT1316 Ignitor Gasket
For veteran technicians maintaining Laars FT series boilers, the Laars Heating Systems FT1316 Ignitor Gasket is a critical component for ensuring a gas-tight seal at the combustion chamber interface. This genuine OEM replacement part (also replacing the FT1663 gasket) is engineered specifically for the Laars Mascot FT and FT series wall-mount and floor-mount units, including the 140 and 199 models. When executing a boiler burner service, replacing a brittle or degraded gasket is non-negotiable to prevent gas leaks and intermittent ignition failure (Error Code 11). Fabricated to withstand high-temperature cycles, this ignitor mounting gasket ensures the hot surface ignitor remains securely positioned, facilitating efficient flame rectification and stable combustion performance. Integrating this high-tolerance heating system component during routine HVAC repair prevents the "hard lockout" scenarios often caused by air bypass or vacuum loss in the fire tube heat exchanger assembly.
Key Benefits- OEM Compatibility: Exact fit for Laars FT1316 and legacy FT1663 part numbers, ensuring zero-gap seating.
- High-Temp Durability: Engineered to hold its structural integrity under extreme combustion chamber thermal loads.
- Leak Prevention: Vital for maintaining the pressure differential required by air pressure sensors to avoid E40 or E44 error codes.
- System Efficiency: Supports stable ignition and consistent flame detection by preventing flue gas recirculation.
Which Laars models use the FT1316 gasket?
This gasket is primarily utilized in the Laars FT Series and Mascot FT combination and heat-only boilers, including the 80, 100, 120, 140, and 199 model sizes.
When should the ignitor gasket be replaced?
Standard protocol for commercial heating maintenance requires gasket replacement whenever the ignitor assembly or burner plate is removed for inspection, or if there is visible evidence of carbon tracking or heat degradation.
Does this part resolve E11 ignition lockout codes?
While E11 can indicate several issues, a compromised ignitor gasket causing air leaks at the seal is a frequent culprit for failed ignition sequences and should be inspected immediately.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Laars Heating Systems FT1316 Ignitor Gasket
For veteran technicians maintaining Laars FT series boilers, the Laars Heating Systems FT1316 Ignitor Gasket is a critical component for ensuring a gas-tight seal at the combustion chamber interface. This genuine OEM replacement part (also replacing the FT1663 gasket) is engineered specifically for the Laars Mascot FT and FT series wall-mount and floor-mount units, including the 140 and 199 models. When executing a boiler burner service, replacing a brittle or degraded gasket is non-negotiable to prevent gas leaks and intermittent ignition failure (Error Code 11). Fabricated to withstand high-temperature cycles, this ignitor mounting gasket ensures the hot surface ignitor remains securely positioned, facilitating efficient flame rectification and stable combustion performance. Integrating this high-tolerance heating system component during routine HVAC repair prevents the "hard lockout" scenarios often caused by air bypass or vacuum loss in the fire tube heat exchanger assembly.
Key Benefits- OEM Compatibility: Exact fit for Laars FT1316 and legacy FT1663 part numbers, ensuring zero-gap seating.
- High-Temp Durability: Engineered to hold its structural integrity under extreme combustion chamber thermal loads.
- Leak Prevention: Vital for maintaining the pressure differential required by air pressure sensors to avoid E40 or E44 error codes.
- System Efficiency: Supports stable ignition and consistent flame detection by preventing flue gas recirculation.
Which Laars models use the FT1316 gasket?
This gasket is primarily utilized in the Laars FT Series and Mascot FT combination and heat-only boilers, including the 80, 100, 120, 140, and 199 model sizes.
When should the ignitor gasket be replaced?
Standard protocol for commercial heating maintenance requires gasket replacement whenever the ignitor assembly or burner plate is removed for inspection, or if there is visible evidence of carbon tracking or heat degradation.
Does this part resolve E11 ignition lockout codes?
While E11 can indicate several issues, a compromised ignitor gasket causing air leaks at the seal is a frequent culprit for failed ignition sequences and should be inspected immediately.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For veteran technicians maintaining Laars FT series boilers, the Laars Heating Systems FT1316 Ignitor Gasket is a critical component for ensuring a gas-tight seal at the combustion chamber interface. This genuine OEM replacement part (also replacing the FT1663 gasket) is engineered specifically for the Laars Mascot FT and FT series wall-mount and floor-mount units, including the 140 and 199 models. When executing a boiler burner service, replacing a brittle or degraded gasket is non-negotiable to prevent gas leaks and intermittent ignition failure (Error Code 11). Fabricated to withstand high-temperature cycles, this ignitor mounting gasket ensures the hot surface ignitor remains securely positioned, facilitating efficient flame rectification and stable combustion performance. Integrating this high-tolerance heating system component during routine HVAC repair prevents the "hard lockout" scenarios often caused by air bypass or vacuum loss in the fire tube heat exchanger assembly.
Key Benefits- OEM Compatibility: Exact fit for Laars FT1316 and legacy FT1663 part numbers, ensuring zero-gap seating.
- High-Temp Durability: Engineered to hold its structural integrity under extreme combustion chamber thermal loads.
- Leak Prevention: Vital for maintaining the pressure differential required by air pressure sensors to avoid E40 or E44 error codes.
- System Efficiency: Supports stable ignition and consistent flame detection by preventing flue gas recirculation.
Which Laars models use the FT1316 gasket?
This gasket is primarily utilized in the Laars FT Series and Mascot FT combination and heat-only boilers, including the 80, 100, 120, 140, and 199 model sizes.
When should the ignitor gasket be replaced?
Standard protocol for commercial heating maintenance requires gasket replacement whenever the ignitor assembly or burner plate is removed for inspection, or if there is visible evidence of carbon tracking or heat degradation.
Does this part resolve E11 ignition lockout codes?
While E11 can indicate several issues, a compromised ignitor gasket causing air leaks at the seal is a frequent culprit for failed ignition sequences and should be inspected immediately.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
