Laars Heating Systems 30-190 Ignitor
The Laars Heating Systems 30-190 Ignitor is a heavy-duty 120V hot surface ignitor designed for precision ignition in gas-fired commercial and residential heating equipment. Engineered to replace worn or cracked HSI components, this direct-fit ignitor ensures consistent lighting of the burner assembly, eliminating the need for a standing pilot and reducing fuel consumption across the duty cycle. The 30-190 ignitor is built with high-density materials to withstand the thermal shock of rapid heating cycles and the intense operating temperatures found in high-efficiency Laars boilers and water heaters.
For service technicians, the Laars 30-190 serves as a critical OEM replacement part that restores the ignition sequence to factory specifications. This hot surface igniter is compatible with various Laars Pennant and Mighty Therm series units where a 120-volt power supply is utilized for the ignition module. Replacing a failing or high-resistance ignitor with the 30-190 prevents common ignition failure lockout codes (such as the 3-flash or 4-flash status on integrated controls) and ensures the unit reaches flame rectification within the specified trial-for-ignition window, maintaining high uptime for critical hydronic systems.
Key Benefits:- Direct 120V HSI Replacement: Designed for seamless integration with Laars Heating Systems controls without requiring harness modifications.
- High-Temperature Durability: Constructed to resist oxidation and carbon buildup, extending the functional life of the heating element in demanding HVACR environments.
- Optimized Ignition Timing: Provides rapid heat-up to ensure reliable fuel ignition, reducing unburned gas accumulation and "hard starts."
- HVAC Contractor Grade: Meets OEM specifications for resistance and amp draw, ensuring compatibility with flame-sensing circuits and ignition modules.
- What are the symptoms of a failing 30-190 ignitor? Common signs include a "No Flame" lockout, the igniter glowing but failing to light the gas, or visible hairline cracks on the silicon carbide/nitride element.
- Can I test the resistance of this ignitor? Yes, a veteran tech should check for continuity and resistance. A reading of "open" or significantly out-of-range resistance indicates the element has reached the end of its service life.
- Is this compatible with 24V systems? No, the 30-190 is a 120V ignitor. Always verify the voltage output of your ignition control board before installation to prevent immediate component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $108.86
-65%$108.86
$38.10Laars Heating Systems 30-190 Ignitor
The Laars Heating Systems 30-190 Ignitor is a heavy-duty 120V hot surface ignitor designed for precision ignition in gas-fired commercial and residential heating equipment. Engineered to replace worn or cracked HSI components, this direct-fit ignitor ensures consistent lighting of the burner assembly, eliminating the need for a standing pilot and reducing fuel consumption across the duty cycle. The 30-190 ignitor is built with high-density materials to withstand the thermal shock of rapid heating cycles and the intense operating temperatures found in high-efficiency Laars boilers and water heaters.
For service technicians, the Laars 30-190 serves as a critical OEM replacement part that restores the ignition sequence to factory specifications. This hot surface igniter is compatible with various Laars Pennant and Mighty Therm series units where a 120-volt power supply is utilized for the ignition module. Replacing a failing or high-resistance ignitor with the 30-190 prevents common ignition failure lockout codes (such as the 3-flash or 4-flash status on integrated controls) and ensures the unit reaches flame rectification within the specified trial-for-ignition window, maintaining high uptime for critical hydronic systems.
Key Benefits:- Direct 120V HSI Replacement: Designed for seamless integration with Laars Heating Systems controls without requiring harness modifications.
- High-Temperature Durability: Constructed to resist oxidation and carbon buildup, extending the functional life of the heating element in demanding HVACR environments.
- Optimized Ignition Timing: Provides rapid heat-up to ensure reliable fuel ignition, reducing unburned gas accumulation and "hard starts."
- HVAC Contractor Grade: Meets OEM specifications for resistance and amp draw, ensuring compatibility with flame-sensing circuits and ignition modules.
- What are the symptoms of a failing 30-190 ignitor? Common signs include a "No Flame" lockout, the igniter glowing but failing to light the gas, or visible hairline cracks on the silicon carbide/nitride element.
- Can I test the resistance of this ignitor? Yes, a veteran tech should check for continuity and resistance. A reading of "open" or significantly out-of-range resistance indicates the element has reached the end of its service life.
- Is this compatible with 24V systems? No, the 30-190 is a 120V ignitor. Always verify the voltage output of your ignition control board before installation to prevent immediate component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Laars Heating Systems 30-190 Ignitor is a heavy-duty 120V hot surface ignitor designed for precision ignition in gas-fired commercial and residential heating equipment. Engineered to replace worn or cracked HSI components, this direct-fit ignitor ensures consistent lighting of the burner assembly, eliminating the need for a standing pilot and reducing fuel consumption across the duty cycle. The 30-190 ignitor is built with high-density materials to withstand the thermal shock of rapid heating cycles and the intense operating temperatures found in high-efficiency Laars boilers and water heaters.
For service technicians, the Laars 30-190 serves as a critical OEM replacement part that restores the ignition sequence to factory specifications. This hot surface igniter is compatible with various Laars Pennant and Mighty Therm series units where a 120-volt power supply is utilized for the ignition module. Replacing a failing or high-resistance ignitor with the 30-190 prevents common ignition failure lockout codes (such as the 3-flash or 4-flash status on integrated controls) and ensures the unit reaches flame rectification within the specified trial-for-ignition window, maintaining high uptime for critical hydronic systems.
Key Benefits:- Direct 120V HSI Replacement: Designed for seamless integration with Laars Heating Systems controls without requiring harness modifications.
- High-Temperature Durability: Constructed to resist oxidation and carbon buildup, extending the functional life of the heating element in demanding HVACR environments.
- Optimized Ignition Timing: Provides rapid heat-up to ensure reliable fuel ignition, reducing unburned gas accumulation and "hard starts."
- HVAC Contractor Grade: Meets OEM specifications for resistance and amp draw, ensuring compatibility with flame-sensing circuits and ignition modules.
- What are the symptoms of a failing 30-190 ignitor? Common signs include a "No Flame" lockout, the igniter glowing but failing to light the gas, or visible hairline cracks on the silicon carbide/nitride element.
- Can I test the resistance of this ignitor? Yes, a veteran tech should check for continuity and resistance. A reading of "open" or significantly out-of-range resistance indicates the element has reached the end of its service life.
- Is this compatible with 24V systems? No, the 30-190 is a 120V ignitor. Always verify the voltage output of your ignition control board before installation to prevent immediate component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
