Heil Quaker ICP 96839 Blower Wheel
The Heil Quaker ICP 96839 Blower Wheel is a high-performance direct drive blower wheel engineered specifically for technical compatibility within International Comfort Products (ICP) and Heil HVAC assemblies. For contractors managing residential or light commercial furnace repairs, maintaining precise airflow specs is non-negotiable to prevent heat exchanger overheating or evaporator coil icing. This 10" x 9" x 1/2" CW blower wheel features a clockwise rotation (viewed from the hub) and a 1/2-inch bore for seamless integration with compatible PSC or ECM blower motors. Constructed with a double-inlet, concave blade design, it ensures optimal static pressure handling and reduced decibel output across the ventilation cycle. When a technician identifies a damaged "squirrel cage" causing vibration or high amp draw on the motor, replacing it with the OEM Heil 96839 restores the equilibrium and efficiency required for forced-air systems. Proper alignment of the set-screw on the motor shaft flat is critical for long-term operational stability.
Key Benefits
- OEM-Grade Balancing: Precision-balanced at the factory to eliminate mechanical vibration and extend the service life of motor bearings.
- Optimized Airflow Geometry: The 10x9 blower wheel sizing and blade pitch are calibrated for maximum CFM output in ICP-specific blower housings.
- Robust Galvanized Construction: Resists corrosion and structural deformation under the high thermal stresses of heat exchanger operation.
- Interchangeable Compatibility: Directly replaces multiple ICP blower wheel part numbers, including 1172129 and 1149106, for streamlined inventory management.
Common Questions
How do I verify the rotation direction before installation?
Rotation is determined by looking at the wheel from the hub side. This unit is clockwise (CW) rotation; installing a CCW wheel in a CW housing will cause a significant drop in static pressure and potential motor failure.
What are the signs of a failing blower wheel?
Common indicators include rhythmic thumping or rattling, reduced airflow at the registers, and increased energy consumption as the motor struggles against an imbalanced or "loaded" wheel.
Does this wheel include the hub set-screw?
Yes, this wheel typically comes equipped with a pre-installed set-screw designed for a standard 1/2-inch motor shaft.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $122.54
-65%$122.54
$42.89Heil Quaker ICP 96839 Blower Wheel
The Heil Quaker ICP 96839 Blower Wheel is a high-performance direct drive blower wheel engineered specifically for technical compatibility within International Comfort Products (ICP) and Heil HVAC assemblies. For contractors managing residential or light commercial furnace repairs, maintaining precise airflow specs is non-negotiable to prevent heat exchanger overheating or evaporator coil icing. This 10" x 9" x 1/2" CW blower wheel features a clockwise rotation (viewed from the hub) and a 1/2-inch bore for seamless integration with compatible PSC or ECM blower motors. Constructed with a double-inlet, concave blade design, it ensures optimal static pressure handling and reduced decibel output across the ventilation cycle. When a technician identifies a damaged "squirrel cage" causing vibration or high amp draw on the motor, replacing it with the OEM Heil 96839 restores the equilibrium and efficiency required for forced-air systems. Proper alignment of the set-screw on the motor shaft flat is critical for long-term operational stability.
Key Benefits
- OEM-Grade Balancing: Precision-balanced at the factory to eliminate mechanical vibration and extend the service life of motor bearings.
- Optimized Airflow Geometry: The 10x9 blower wheel sizing and blade pitch are calibrated for maximum CFM output in ICP-specific blower housings.
- Robust Galvanized Construction: Resists corrosion and structural deformation under the high thermal stresses of heat exchanger operation.
- Interchangeable Compatibility: Directly replaces multiple ICP blower wheel part numbers, including 1172129 and 1149106, for streamlined inventory management.
Common Questions
How do I verify the rotation direction before installation?
Rotation is determined by looking at the wheel from the hub side. This unit is clockwise (CW) rotation; installing a CCW wheel in a CW housing will cause a significant drop in static pressure and potential motor failure.
What are the signs of a failing blower wheel?
Common indicators include rhythmic thumping or rattling, reduced airflow at the registers, and increased energy consumption as the motor struggles against an imbalanced or "loaded" wheel.
Does this wheel include the hub set-screw?
Yes, this wheel typically comes equipped with a pre-installed set-screw designed for a standard 1/2-inch motor shaft.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 96839 Blower Wheel is a high-performance direct drive blower wheel engineered specifically for technical compatibility within International Comfort Products (ICP) and Heil HVAC assemblies. For contractors managing residential or light commercial furnace repairs, maintaining precise airflow specs is non-negotiable to prevent heat exchanger overheating or evaporator coil icing. This 10" x 9" x 1/2" CW blower wheel features a clockwise rotation (viewed from the hub) and a 1/2-inch bore for seamless integration with compatible PSC or ECM blower motors. Constructed with a double-inlet, concave blade design, it ensures optimal static pressure handling and reduced decibel output across the ventilation cycle. When a technician identifies a damaged "squirrel cage" causing vibration or high amp draw on the motor, replacing it with the OEM Heil 96839 restores the equilibrium and efficiency required for forced-air systems. Proper alignment of the set-screw on the motor shaft flat is critical for long-term operational stability.
Key Benefits
- OEM-Grade Balancing: Precision-balanced at the factory to eliminate mechanical vibration and extend the service life of motor bearings.
- Optimized Airflow Geometry: The 10x9 blower wheel sizing and blade pitch are calibrated for maximum CFM output in ICP-specific blower housings.
- Robust Galvanized Construction: Resists corrosion and structural deformation under the high thermal stresses of heat exchanger operation.
- Interchangeable Compatibility: Directly replaces multiple ICP blower wheel part numbers, including 1172129 and 1149106, for streamlined inventory management.
Common Questions
How do I verify the rotation direction before installation?
Rotation is determined by looking at the wheel from the hub side. This unit is clockwise (CW) rotation; installing a CCW wheel in a CW housing will cause a significant drop in static pressure and potential motor failure.
What are the signs of a failing blower wheel?
Common indicators include rhythmic thumping or rattling, reduced airflow at the registers, and increased energy consumption as the motor struggles against an imbalanced or "loaded" wheel.
Does this wheel include the hub set-screw?
Yes, this wheel typically comes equipped with a pre-installed set-screw designed for a standard 1/2-inch motor shaft.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
