Heil Quaker ICP 85PS110C76 Capacitor
The Heil Quaker ICP 85PS110C76 Capacitor is a high-performance motor start capacitor engineered for intense induction loads in HVAC systems and commercial refrigeration. Rated at 243-292 MFD (microfarads) with a 110-125V capacity, this non-polarized electrolytic component provides the high-torque starting boost required for single-phase motors and compressors. Built with a moisture-resistant bakelite plastic case (phenolic resin) and operating at 50/60 Hz, it is designed to withstand the thermal stress of frequent cycling. This model often serves as a direct OEM replacement capacitor for Tecumseh, True Refrigeration, and International Comfort Products (ICP) equipment, ensuring precise timing and electrical alignment. The round start capacitor features standard 1/4-inch male quick-connect terminals, facilitating a secure fit in tight control boxes. For technicians servicing vintage Heil furnaces or modern condenser units, matching this 243-292 uF rating is essential to prevent winding damage and ensure reliable motor ignition under peak load conditions.
Key Benefit List- Optimized High-Torque Start: Provides consistent 243-292 MFD capacitance to ensure compressors and fan motors overcome inertia without stalling.
- Broad Compatibility: Functions as a primary cross-reference for Heil commercial HVAC parts, True 842007, and various 110V refrigeration motors.
- Durable Construction: The phenolic resin housing protects internal electrolytic elements from oil, moisture, and corridor heat up to 149?F (65?C).
- Universal Terminal Design: Dual or quad-blade quick-connect terminals allow for rapid field installation and steady electrical continuity.
- Reliable Motor Protection: Prevents motor overheating and humming by delivering the exact phase-shift voltage required for a clean start.
What are the signs that a 243-292 MFD capacitor has failed?
Technicians should look for a motor that "hums" but fails to spin, visible bulging or "mushrooming" of the plastic casing, or a capacitance reading below 243 uF when tested with a multimeter.
Can I use a 125V capacitor to replace a 110V unit?
Yes, as long as the MFD rating (243-292) is matched exactly. A higher voltage rating is safe and often preferred for durability, but a lower voltage rating will likely cause premature failure.
Is this a start capacitor or a run capacitor?
This is a start capacitor, designed for intermittent duty to provide an initial torque boost. It should not be used in applications requiring a continuous-duty run capacitor.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $29.64
-65%$29.64
$10.37Heil Quaker ICP 85PS110C76 Capacitor
The Heil Quaker ICP 85PS110C76 Capacitor is a high-performance motor start capacitor engineered for intense induction loads in HVAC systems and commercial refrigeration. Rated at 243-292 MFD (microfarads) with a 110-125V capacity, this non-polarized electrolytic component provides the high-torque starting boost required for single-phase motors and compressors. Built with a moisture-resistant bakelite plastic case (phenolic resin) and operating at 50/60 Hz, it is designed to withstand the thermal stress of frequent cycling. This model often serves as a direct OEM replacement capacitor for Tecumseh, True Refrigeration, and International Comfort Products (ICP) equipment, ensuring precise timing and electrical alignment. The round start capacitor features standard 1/4-inch male quick-connect terminals, facilitating a secure fit in tight control boxes. For technicians servicing vintage Heil furnaces or modern condenser units, matching this 243-292 uF rating is essential to prevent winding damage and ensure reliable motor ignition under peak load conditions.
Key Benefit List- Optimized High-Torque Start: Provides consistent 243-292 MFD capacitance to ensure compressors and fan motors overcome inertia without stalling.
- Broad Compatibility: Functions as a primary cross-reference for Heil commercial HVAC parts, True 842007, and various 110V refrigeration motors.
- Durable Construction: The phenolic resin housing protects internal electrolytic elements from oil, moisture, and corridor heat up to 149?F (65?C).
- Universal Terminal Design: Dual or quad-blade quick-connect terminals allow for rapid field installation and steady electrical continuity.
- Reliable Motor Protection: Prevents motor overheating and humming by delivering the exact phase-shift voltage required for a clean start.
What are the signs that a 243-292 MFD capacitor has failed?
Technicians should look for a motor that "hums" but fails to spin, visible bulging or "mushrooming" of the plastic casing, or a capacitance reading below 243 uF when tested with a multimeter.
Can I use a 125V capacitor to replace a 110V unit?
Yes, as long as the MFD rating (243-292) is matched exactly. A higher voltage rating is safe and often preferred for durability, but a lower voltage rating will likely cause premature failure.
Is this a start capacitor or a run capacitor?
This is a start capacitor, designed for intermittent duty to provide an initial torque boost. It should not be used in applications requiring a continuous-duty run capacitor.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 85PS110C76 Capacitor is a high-performance motor start capacitor engineered for intense induction loads in HVAC systems and commercial refrigeration. Rated at 243-292 MFD (microfarads) with a 110-125V capacity, this non-polarized electrolytic component provides the high-torque starting boost required for single-phase motors and compressors. Built with a moisture-resistant bakelite plastic case (phenolic resin) and operating at 50/60 Hz, it is designed to withstand the thermal stress of frequent cycling. This model often serves as a direct OEM replacement capacitor for Tecumseh, True Refrigeration, and International Comfort Products (ICP) equipment, ensuring precise timing and electrical alignment. The round start capacitor features standard 1/4-inch male quick-connect terminals, facilitating a secure fit in tight control boxes. For technicians servicing vintage Heil furnaces or modern condenser units, matching this 243-292 uF rating is essential to prevent winding damage and ensure reliable motor ignition under peak load conditions.
Key Benefit List- Optimized High-Torque Start: Provides consistent 243-292 MFD capacitance to ensure compressors and fan motors overcome inertia without stalling.
- Broad Compatibility: Functions as a primary cross-reference for Heil commercial HVAC parts, True 842007, and various 110V refrigeration motors.
- Durable Construction: The phenolic resin housing protects internal electrolytic elements from oil, moisture, and corridor heat up to 149?F (65?C).
- Universal Terminal Design: Dual or quad-blade quick-connect terminals allow for rapid field installation and steady electrical continuity.
- Reliable Motor Protection: Prevents motor overheating and humming by delivering the exact phase-shift voltage required for a clean start.
What are the signs that a 243-292 MFD capacitor has failed?
Technicians should look for a motor that "hums" but fails to spin, visible bulging or "mushrooming" of the plastic casing, or a capacitance reading below 243 uF when tested with a multimeter.
Can I use a 125V capacitor to replace a 110V unit?
Yes, as long as the MFD rating (243-292) is matched exactly. A higher voltage rating is safe and often preferred for durability, but a lower voltage rating will likely cause premature failure.
Is this a start capacitor or a run capacitor?
This is a start capacitor, designed for intermittent duty to provide an initial torque boost. It should not be used in applications requiring a continuous-duty run capacitor.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
