Heil Quaker ICP 1191554 Switch
The Heil Quaker ICP 1191554 Switch Vent Pressure is a critical safety component engineered for precision monitoring of combustion airflow in high-efficiency furnaces and HVAC systems. As a genuine ICP OEM replacement part, this vent pressure switch ensures the draft inducer motor is generating the correct static pressure before allowing the ignition sequence to proceed. A common diagnostic point for technicians, this switch prevents the furnace from firing if it detects a blocked flue, failed inducer, or compromised venting path, thereby protecting the heat exchanger from dangerous combustion conditions. Built to exact Heil furnace parts specifications, the 1191554 is designed for high-cycle reliability and a perfect fit on compatible Comfortmaker, Tempstar, and Heil Quaker units. Utilizing this furnace pressure switch rather than universal alternatives maintains the specific manifold pressure tolerances required by the original manufacturer, effectively eliminating nuisance trips caused by improper calibration. This 1191554 pressure switch is essential for restoring system operation when the control board flashes airflow-related error codes.
Key Benefits:
- OEM Integrity: Direct replacement for Heil Quaker ICP 1191554, ensuring matched activation thresholds for safe combustion.
- System Protection: Critical safety vent pressure monitoring prevents furnace operation during venting failures or blockages.
- Precision Calibration: Factory-set for specific inducer motor vacuum requirements to prevent short-cycling.
- Wide Compatibility: Standardized for multiple International Comfort Products brands including Tempstar and Comfortmaker.
Common Questions:
What are the signs that my ICP 1191554 vent pressure switch has failed?
Usually, the inducer motor will run, but the ignitor will not glow, and the system will eventually time out with a pressure switch stay-open error code. You should also check for a cracked pressure switch hose or water in the lines before replacing the switch.
Does the 1191554 replace other ICP pressure switch part numbers?
Yes, this 1191554 switch is a standard OEM part for many mid-to-high efficiency models. Always verify the part number on the existing switch's label or the unit's technical data sheet to ensure a match for the pressure rating (measured in inches of water column).
Can I test this switch with a multimeter?
Yes, a qualified technician can test for continuity across the terminals once the inducer motor creates sufficient vacuum to close the internal diaphragm. If the switch remains open while the system is under proper vacuum, the 1191554 needs to be replaced.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $50.59
-65%$50.59
$17.71Heil Quaker ICP 1191554 Switch
The Heil Quaker ICP 1191554 Switch Vent Pressure is a critical safety component engineered for precision monitoring of combustion airflow in high-efficiency furnaces and HVAC systems. As a genuine ICP OEM replacement part, this vent pressure switch ensures the draft inducer motor is generating the correct static pressure before allowing the ignition sequence to proceed. A common diagnostic point for technicians, this switch prevents the furnace from firing if it detects a blocked flue, failed inducer, or compromised venting path, thereby protecting the heat exchanger from dangerous combustion conditions. Built to exact Heil furnace parts specifications, the 1191554 is designed for high-cycle reliability and a perfect fit on compatible Comfortmaker, Tempstar, and Heil Quaker units. Utilizing this furnace pressure switch rather than universal alternatives maintains the specific manifold pressure tolerances required by the original manufacturer, effectively eliminating nuisance trips caused by improper calibration. This 1191554 pressure switch is essential for restoring system operation when the control board flashes airflow-related error codes.
Key Benefits:
- OEM Integrity: Direct replacement for Heil Quaker ICP 1191554, ensuring matched activation thresholds for safe combustion.
- System Protection: Critical safety vent pressure monitoring prevents furnace operation during venting failures or blockages.
- Precision Calibration: Factory-set for specific inducer motor vacuum requirements to prevent short-cycling.
- Wide Compatibility: Standardized for multiple International Comfort Products brands including Tempstar and Comfortmaker.
Common Questions:
What are the signs that my ICP 1191554 vent pressure switch has failed?
Usually, the inducer motor will run, but the ignitor will not glow, and the system will eventually time out with a pressure switch stay-open error code. You should also check for a cracked pressure switch hose or water in the lines before replacing the switch.
Does the 1191554 replace other ICP pressure switch part numbers?
Yes, this 1191554 switch is a standard OEM part for many mid-to-high efficiency models. Always verify the part number on the existing switch's label or the unit's technical data sheet to ensure a match for the pressure rating (measured in inches of water column).
Can I test this switch with a multimeter?
Yes, a qualified technician can test for continuity across the terminals once the inducer motor creates sufficient vacuum to close the internal diaphragm. If the switch remains open while the system is under proper vacuum, the 1191554 needs to be replaced.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1191554 Switch Vent Pressure is a critical safety component engineered for precision monitoring of combustion airflow in high-efficiency furnaces and HVAC systems. As a genuine ICP OEM replacement part, this vent pressure switch ensures the draft inducer motor is generating the correct static pressure before allowing the ignition sequence to proceed. A common diagnostic point for technicians, this switch prevents the furnace from firing if it detects a blocked flue, failed inducer, or compromised venting path, thereby protecting the heat exchanger from dangerous combustion conditions. Built to exact Heil furnace parts specifications, the 1191554 is designed for high-cycle reliability and a perfect fit on compatible Comfortmaker, Tempstar, and Heil Quaker units. Utilizing this furnace pressure switch rather than universal alternatives maintains the specific manifold pressure tolerances required by the original manufacturer, effectively eliminating nuisance trips caused by improper calibration. This 1191554 pressure switch is essential for restoring system operation when the control board flashes airflow-related error codes.
Key Benefits:
- OEM Integrity: Direct replacement for Heil Quaker ICP 1191554, ensuring matched activation thresholds for safe combustion.
- System Protection: Critical safety vent pressure monitoring prevents furnace operation during venting failures or blockages.
- Precision Calibration: Factory-set for specific inducer motor vacuum requirements to prevent short-cycling.
- Wide Compatibility: Standardized for multiple International Comfort Products brands including Tempstar and Comfortmaker.
Common Questions:
What are the signs that my ICP 1191554 vent pressure switch has failed?
Usually, the inducer motor will run, but the ignitor will not glow, and the system will eventually time out with a pressure switch stay-open error code. You should also check for a cracked pressure switch hose or water in the lines before replacing the switch.
Does the 1191554 replace other ICP pressure switch part numbers?
Yes, this 1191554 switch is a standard OEM part for many mid-to-high efficiency models. Always verify the part number on the existing switch's label or the unit's technical data sheet to ensure a match for the pressure rating (measured in inches of water column).
Can I test this switch with a multimeter?
Yes, a qualified technician can test for continuity across the terminals once the inducer motor creates sufficient vacuum to close the internal diaphragm. If the switch remains open while the system is under proper vacuum, the 1191554 needs to be replaced.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
