Heil Quaker ICP 1186438 Motor
The Heil Quaker ICP 1186438 Motor is a heavy-duty 3/4 HP blower motor designed for high-static pressure applications in residential and light commercial HVAC systems. This OEM replacement motor eliminates the mounting issues and performance discrepancies common with universal alternatives. Operating at 1075 RPM with multi-speed capability, it allows for precise airflow tuning to optimize furnace blower motor efficiency across heating and cooling cycles. This direct drive blower motor features a resilient mount and utilizes a permanent split capacitor (PSC) design, requiring a specific MFD capacitor for stable torque and thermal protection. For technicians performing ICP furnace motor replacement, the 1186438 provides the correct shaft diameter and frame size to ensure perfect alignment with the blower wheel, preventing vibration and premature bearing failure. This motor is compatible with various Heil, Tempstar, and Comfortmaker units, serving as a reliable pick for restoring system CFM to original manufacturer specifications.
Key Technical Benefits
- 3/4 HP Power Rating: Delivers high-torque performance for demanding ductwork configurations.
- Multi-Speed Flexibility: Allows for field-adjustable airflow rates to match specific heat gain/loss requirements.
- OEM Fitment: Eliminates the need for bracket modifications or shaft cutting during installation.
- Thermal Overload Protection: Sustains motor integrity during high-load conditions or restricted airflow scenarios.
- PSC Design: Provides a balance of starting torque and operational efficiency for reduced electrical draw.
Common Installation Questions
What capacitor is required for the ICP 1186438 motor?
This motor requires a specific microfarad (MFD) capacitor, typically rated for 370V or 440V. Always verify the MFD rating on the new motor's nameplate, as it may differ from the failed motor if an older revision was used.
Can I use this 3/4 HP motor to replace a 1/2 HP motor?
While it is physically possible, it is not recommended unless the blower wheel and duct system are rated for the increased airflow. Over-motoring can lead to high static pressure issues and noise.
Is this motor reversible in the field?
This motor is typically set for a specific rotation (CCW or CW) from the factory. Technicians should verify the lead wire configuration for rotation reversal if the application requires it.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $710.05
-65%$710.05
$248.52Heil Quaker ICP 1186438 Motor
The Heil Quaker ICP 1186438 Motor is a heavy-duty 3/4 HP blower motor designed for high-static pressure applications in residential and light commercial HVAC systems. This OEM replacement motor eliminates the mounting issues and performance discrepancies common with universal alternatives. Operating at 1075 RPM with multi-speed capability, it allows for precise airflow tuning to optimize furnace blower motor efficiency across heating and cooling cycles. This direct drive blower motor features a resilient mount and utilizes a permanent split capacitor (PSC) design, requiring a specific MFD capacitor for stable torque and thermal protection. For technicians performing ICP furnace motor replacement, the 1186438 provides the correct shaft diameter and frame size to ensure perfect alignment with the blower wheel, preventing vibration and premature bearing failure. This motor is compatible with various Heil, Tempstar, and Comfortmaker units, serving as a reliable pick for restoring system CFM to original manufacturer specifications.
Key Technical Benefits
- 3/4 HP Power Rating: Delivers high-torque performance for demanding ductwork configurations.
- Multi-Speed Flexibility: Allows for field-adjustable airflow rates to match specific heat gain/loss requirements.
- OEM Fitment: Eliminates the need for bracket modifications or shaft cutting during installation.
- Thermal Overload Protection: Sustains motor integrity during high-load conditions or restricted airflow scenarios.
- PSC Design: Provides a balance of starting torque and operational efficiency for reduced electrical draw.
Common Installation Questions
What capacitor is required for the ICP 1186438 motor?
This motor requires a specific microfarad (MFD) capacitor, typically rated for 370V or 440V. Always verify the MFD rating on the new motor's nameplate, as it may differ from the failed motor if an older revision was used.
Can I use this 3/4 HP motor to replace a 1/2 HP motor?
While it is physically possible, it is not recommended unless the blower wheel and duct system are rated for the increased airflow. Over-motoring can lead to high static pressure issues and noise.
Is this motor reversible in the field?
This motor is typically set for a specific rotation (CCW or CW) from the factory. Technicians should verify the lead wire configuration for rotation reversal if the application requires it.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1186438 Motor is a heavy-duty 3/4 HP blower motor designed for high-static pressure applications in residential and light commercial HVAC systems. This OEM replacement motor eliminates the mounting issues and performance discrepancies common with universal alternatives. Operating at 1075 RPM with multi-speed capability, it allows for precise airflow tuning to optimize furnace blower motor efficiency across heating and cooling cycles. This direct drive blower motor features a resilient mount and utilizes a permanent split capacitor (PSC) design, requiring a specific MFD capacitor for stable torque and thermal protection. For technicians performing ICP furnace motor replacement, the 1186438 provides the correct shaft diameter and frame size to ensure perfect alignment with the blower wheel, preventing vibration and premature bearing failure. This motor is compatible with various Heil, Tempstar, and Comfortmaker units, serving as a reliable pick for restoring system CFM to original manufacturer specifications.
Key Technical Benefits
- 3/4 HP Power Rating: Delivers high-torque performance for demanding ductwork configurations.
- Multi-Speed Flexibility: Allows for field-adjustable airflow rates to match specific heat gain/loss requirements.
- OEM Fitment: Eliminates the need for bracket modifications or shaft cutting during installation.
- Thermal Overload Protection: Sustains motor integrity during high-load conditions or restricted airflow scenarios.
- PSC Design: Provides a balance of starting torque and operational efficiency for reduced electrical draw.
Common Installation Questions
What capacitor is required for the ICP 1186438 motor?
This motor requires a specific microfarad (MFD) capacitor, typically rated for 370V or 440V. Always verify the MFD rating on the new motor's nameplate, as it may differ from the failed motor if an older revision was used.
Can I use this 3/4 HP motor to replace a 1/2 HP motor?
While it is physically possible, it is not recommended unless the blower wheel and duct system are rated for the increased airflow. Over-motoring can lead to high static pressure issues and noise.
Is this motor reversible in the field?
This motor is typically set for a specific rotation (CCW or CW) from the factory. Technicians should verify the lead wire configuration for rotation reversal if the application requires it.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
