Heil Quaker ICP 1185268 Control
The Heil Quaker ICP 1185268 ECM X-13 Motor Control is an essential OEM replacement module designed specifically for 1/3 HP constant torque motors. Engineered for high-efficiency performance in International Comfort Products (ICP) furnace and fan coil units, this ECM X-13 MTR CONTROL 1/3 HP manages the discrete speed taps to provide consistent airflow across varying static pressures. As a direct-fit component for brands including Heil, Tempstar, and Comfortmaker, this module replaces legacy ICP 1185268 blower controls, ensuring the motor operates within the factory-programmed torque parameters for heating and cooling cycles.
For field technicians, troubleshooting the 1185268 motor control involves verifying the 24V signals at the programmed speed taps (1-5) and ensuring the high-voltage line power is consistent. This module is sensitive to power quality; installing a surge protector or an inline ECM protector is a professional standard to prevent module failure due to transient voltage or lightning spikes. Always inspect the blower wheel for imbalances before installation, as excessive vibration is a primary cause of premature mechanical failure in the associated motor assembly.
Key Benefits for HVAC Contractors:
- Authentic OEM Compatibility: Verified for ICP 1185268 specifications, ensuring seamless communication with existing furnace control boards and thermostat demands.
- Optimized Energy Efficiency: Maintains constant torque performance, reducing electrical consumption compared to traditional PSC motors while providing quieter operation.
- Precision Speed Tap Logic: Supports up to five distinct speed tap configurations, allowing for precise adjustment of CFM based on system static pressure.
- Durable Electronics: Built to withstand the high-temperature environment of the blower deck with industrial-grade capacitors and power limiters.
Common Questions & Troubleshooting:
How do I verify if the ICP 1185268 module is defective?
Confirm the motor has proper high voltage at terminals L and N. Then, check for a 24VAC call between the Common (C) and the active speed tap. If 24V is present but the motor does not turn, the module has likely failed.
Is this control module pre-programmed for 1/3 HP motors?
Yes, the 1185268 is specifically programmed for 1/3 HP ECM X-13 applications. Using a module with incorrect horsepower or programming will result in improper torque and potential system limit trips.
Why is my blower motor rocking back and forth but not starting?
An ECM motor "rocking" at startup is normal as the 1185268 module senses the rotor position. However, if it fails to transition into a full rotation, it indicates a phase-to-phase short in the motor windings or a failure in the module's power inverter circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $295.57
-65%$295.57
$103.45Heil Quaker ICP 1185268 Control
The Heil Quaker ICP 1185268 ECM X-13 Motor Control is an essential OEM replacement module designed specifically for 1/3 HP constant torque motors. Engineered for high-efficiency performance in International Comfort Products (ICP) furnace and fan coil units, this ECM X-13 MTR CONTROL 1/3 HP manages the discrete speed taps to provide consistent airflow across varying static pressures. As a direct-fit component for brands including Heil, Tempstar, and Comfortmaker, this module replaces legacy ICP 1185268 blower controls, ensuring the motor operates within the factory-programmed torque parameters for heating and cooling cycles.
For field technicians, troubleshooting the 1185268 motor control involves verifying the 24V signals at the programmed speed taps (1-5) and ensuring the high-voltage line power is consistent. This module is sensitive to power quality; installing a surge protector or an inline ECM protector is a professional standard to prevent module failure due to transient voltage or lightning spikes. Always inspect the blower wheel for imbalances before installation, as excessive vibration is a primary cause of premature mechanical failure in the associated motor assembly.
Key Benefits for HVAC Contractors:
- Authentic OEM Compatibility: Verified for ICP 1185268 specifications, ensuring seamless communication with existing furnace control boards and thermostat demands.
- Optimized Energy Efficiency: Maintains constant torque performance, reducing electrical consumption compared to traditional PSC motors while providing quieter operation.
- Precision Speed Tap Logic: Supports up to five distinct speed tap configurations, allowing for precise adjustment of CFM based on system static pressure.
- Durable Electronics: Built to withstand the high-temperature environment of the blower deck with industrial-grade capacitors and power limiters.
Common Questions & Troubleshooting:
How do I verify if the ICP 1185268 module is defective?
Confirm the motor has proper high voltage at terminals L and N. Then, check for a 24VAC call between the Common (C) and the active speed tap. If 24V is present but the motor does not turn, the module has likely failed.
Is this control module pre-programmed for 1/3 HP motors?
Yes, the 1185268 is specifically programmed for 1/3 HP ECM X-13 applications. Using a module with incorrect horsepower or programming will result in improper torque and potential system limit trips.
Why is my blower motor rocking back and forth but not starting?
An ECM motor "rocking" at startup is normal as the 1185268 module senses the rotor position. However, if it fails to transition into a full rotation, it indicates a phase-to-phase short in the motor windings or a failure in the module's power inverter circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1185268 ECM X-13 Motor Control is an essential OEM replacement module designed specifically for 1/3 HP constant torque motors. Engineered for high-efficiency performance in International Comfort Products (ICP) furnace and fan coil units, this ECM X-13 MTR CONTROL 1/3 HP manages the discrete speed taps to provide consistent airflow across varying static pressures. As a direct-fit component for brands including Heil, Tempstar, and Comfortmaker, this module replaces legacy ICP 1185268 blower controls, ensuring the motor operates within the factory-programmed torque parameters for heating and cooling cycles.
For field technicians, troubleshooting the 1185268 motor control involves verifying the 24V signals at the programmed speed taps (1-5) and ensuring the high-voltage line power is consistent. This module is sensitive to power quality; installing a surge protector or an inline ECM protector is a professional standard to prevent module failure due to transient voltage or lightning spikes. Always inspect the blower wheel for imbalances before installation, as excessive vibration is a primary cause of premature mechanical failure in the associated motor assembly.
Key Benefits for HVAC Contractors:
- Authentic OEM Compatibility: Verified for ICP 1185268 specifications, ensuring seamless communication with existing furnace control boards and thermostat demands.
- Optimized Energy Efficiency: Maintains constant torque performance, reducing electrical consumption compared to traditional PSC motors while providing quieter operation.
- Precision Speed Tap Logic: Supports up to five distinct speed tap configurations, allowing for precise adjustment of CFM based on system static pressure.
- Durable Electronics: Built to withstand the high-temperature environment of the blower deck with industrial-grade capacitors and power limiters.
Common Questions & Troubleshooting:
How do I verify if the ICP 1185268 module is defective?
Confirm the motor has proper high voltage at terminals L and N. Then, check for a 24VAC call between the Common (C) and the active speed tap. If 24V is present but the motor does not turn, the module has likely failed.
Is this control module pre-programmed for 1/3 HP motors?
Yes, the 1185268 is specifically programmed for 1/3 HP ECM X-13 applications. Using a module with incorrect horsepower or programming will result in improper torque and potential system limit trips.
Why is my blower motor rocking back and forth but not starting?
An ECM motor "rocking" at startup is normal as the 1185268 module senses the rotor position. However, if it fails to transition into a full rotation, it indicates a phase-to-phase short in the motor windings or a failure in the module's power inverter circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
