Heil Quaker ICP 1184481 Rubber Parts Kit
The Heil Quaker ICP 1184481 Rubber Parts Kit is a critical OEM maintenance component designed to restore structural integrity and vibration dampening to your furnace's blower or inducer motor assembly. As a Genuine ICP Replacement Part, this kit is engineered for precision fitment across Heil, Tempstar, Comfortmaker, and Arcoaire HVAC systems. Over time, original rubber grommets and seals degrade due to constant thermal cycling and mechanical stress, leading to increased harmonic noise and potential component misalignment. By utilizing this HVAC Rubber Grommet Kit, contractors can ensure a secure, isolated mount that prevents metal-to-metal contact and minimizes resonant vibration within the 40-inch furnace cabinet. This ICP 1184481 Maintenance Kit includes high-grade, self-adhesive foam and rubber seals required for a professional seal between the motor plate and the inducer housing. Whether you are performing a full motor swap or a preventative maintenance overhaul, using authentic International Comfort Products parts ensures the unit maintains factory-spec clearances, protecting the blower wheel and motor shaft from premature wear caused by excessive movement.
Key Benefits- Dampens Harmonic Vibration: High-density rubber components absorb mechanical energy, reducing operational noise and preventing "cabinet rattle" in residential furnaces.
- Ensures Proper Component Alignment: Maintains the critical spacing required between the motor shaft and housing to prevent inducer wheel interference.
- OEM-Spec Seal Integrity: Includes self-adhesive foam seals designed to withstand the high-temperature environment of the combustion assembly.
- Broad Brand Compatibility: Directly replaces worn parts in Heil Quaker, KeepRite, and Day & Night units, ensuring an exact fit without field modifications.
When should this kit be replaced during a service call?
Technicians should inspect the 1184481 rubber parts whenever the inducer motor is pulled for inspection. If the rubber shows signs of "cracking," "dry rot," or has become compressed and brittle, it will no longer provide adequate dampening and should be replaced to avoid call-backs related to noise.
Are these parts compatible with non-condensing furnace models?
Yes, the ICP 1184481 is widely used in both mid-efficiency and non-condensing Heil Quaker induced-draft furnaces. Always verify the specific model number in the parts list to confirm this kit matches the motor plate configuration.
Does this kit include the mounting screws?
This kit focuses on the rubber seals and grommets. While some larger motor mount kits include hardware, the 1184481 specifically provides the rubber isolation components. It is recommended to reuse the original factory screws unless they are stripped or corroded.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $34.15
-65%$34.15
$11.95Heil Quaker ICP 1184481 Rubber Parts Kit
The Heil Quaker ICP 1184481 Rubber Parts Kit is a critical OEM maintenance component designed to restore structural integrity and vibration dampening to your furnace's blower or inducer motor assembly. As a Genuine ICP Replacement Part, this kit is engineered for precision fitment across Heil, Tempstar, Comfortmaker, and Arcoaire HVAC systems. Over time, original rubber grommets and seals degrade due to constant thermal cycling and mechanical stress, leading to increased harmonic noise and potential component misalignment. By utilizing this HVAC Rubber Grommet Kit, contractors can ensure a secure, isolated mount that prevents metal-to-metal contact and minimizes resonant vibration within the 40-inch furnace cabinet. This ICP 1184481 Maintenance Kit includes high-grade, self-adhesive foam and rubber seals required for a professional seal between the motor plate and the inducer housing. Whether you are performing a full motor swap or a preventative maintenance overhaul, using authentic International Comfort Products parts ensures the unit maintains factory-spec clearances, protecting the blower wheel and motor shaft from premature wear caused by excessive movement.
Key Benefits- Dampens Harmonic Vibration: High-density rubber components absorb mechanical energy, reducing operational noise and preventing "cabinet rattle" in residential furnaces.
- Ensures Proper Component Alignment: Maintains the critical spacing required between the motor shaft and housing to prevent inducer wheel interference.
- OEM-Spec Seal Integrity: Includes self-adhesive foam seals designed to withstand the high-temperature environment of the combustion assembly.
- Broad Brand Compatibility: Directly replaces worn parts in Heil Quaker, KeepRite, and Day & Night units, ensuring an exact fit without field modifications.
When should this kit be replaced during a service call?
Technicians should inspect the 1184481 rubber parts whenever the inducer motor is pulled for inspection. If the rubber shows signs of "cracking," "dry rot," or has become compressed and brittle, it will no longer provide adequate dampening and should be replaced to avoid call-backs related to noise.
Are these parts compatible with non-condensing furnace models?
Yes, the ICP 1184481 is widely used in both mid-efficiency and non-condensing Heil Quaker induced-draft furnaces. Always verify the specific model number in the parts list to confirm this kit matches the motor plate configuration.
Does this kit include the mounting screws?
This kit focuses on the rubber seals and grommets. While some larger motor mount kits include hardware, the 1184481 specifically provides the rubber isolation components. It is recommended to reuse the original factory screws unless they are stripped or corroded.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1184481 Rubber Parts Kit is a critical OEM maintenance component designed to restore structural integrity and vibration dampening to your furnace's blower or inducer motor assembly. As a Genuine ICP Replacement Part, this kit is engineered for precision fitment across Heil, Tempstar, Comfortmaker, and Arcoaire HVAC systems. Over time, original rubber grommets and seals degrade due to constant thermal cycling and mechanical stress, leading to increased harmonic noise and potential component misalignment. By utilizing this HVAC Rubber Grommet Kit, contractors can ensure a secure, isolated mount that prevents metal-to-metal contact and minimizes resonant vibration within the 40-inch furnace cabinet. This ICP 1184481 Maintenance Kit includes high-grade, self-adhesive foam and rubber seals required for a professional seal between the motor plate and the inducer housing. Whether you are performing a full motor swap or a preventative maintenance overhaul, using authentic International Comfort Products parts ensures the unit maintains factory-spec clearances, protecting the blower wheel and motor shaft from premature wear caused by excessive movement.
Key Benefits- Dampens Harmonic Vibration: High-density rubber components absorb mechanical energy, reducing operational noise and preventing "cabinet rattle" in residential furnaces.
- Ensures Proper Component Alignment: Maintains the critical spacing required between the motor shaft and housing to prevent inducer wheel interference.
- OEM-Spec Seal Integrity: Includes self-adhesive foam seals designed to withstand the high-temperature environment of the combustion assembly.
- Broad Brand Compatibility: Directly replaces worn parts in Heil Quaker, KeepRite, and Day & Night units, ensuring an exact fit without field modifications.
When should this kit be replaced during a service call?
Technicians should inspect the 1184481 rubber parts whenever the inducer motor is pulled for inspection. If the rubber shows signs of "cracking," "dry rot," or has become compressed and brittle, it will no longer provide adequate dampening and should be replaced to avoid call-backs related to noise.
Are these parts compatible with non-condensing furnace models?
Yes, the ICP 1184481 is widely used in both mid-efficiency and non-condensing Heil Quaker induced-draft furnaces. Always verify the specific model number in the parts list to confirm this kit matches the motor plate configuration.
Does this kit include the mounting screws?
This kit focuses on the rubber seals and grommets. While some larger motor mount kits include hardware, the 1184481 specifically provides the rubber isolation components. It is recommended to reuse the original factory screws unless they are stripped or corroded.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
