Heil Quaker ICP 1184153 Blower Housing
The Heil Quaker ICP 1184153 Blower Housing is a critical structural component engineered for high-static pressure environments within residential and light commercial HVAC systems. This 9-inch blower housing assembly is designed to precisely encapsulate the blower wheel, optimizing airflow dynamics and ensuring maximum static efficiency during both heating and cooling cycles. Manufactured by International Comfort Products (ICP), this part serves as an authentic OEM HVAC replacement part for brands including Arcoaire, Comfortmaker, and Heil. Its heavy-gauge steel construction provides the necessary rigidity to dampen operational vibrations, which prevents premature mechanical wear on the indoor blower motor and mounting brackets.
For technicians performing a furnace blower repair, the 1184153 offers a direct-fit solution that maintains the original equipment?s factory specifications. Proper housing alignment is essential for maintaining the tight clearances required for efficient air movement and systemic pressure balance. This assembly is frequently utilized in packaged units and gas furnaces to house 5-5/8 inch diameter motors and associated blower wheels. Replacing a warped or corroded housing is vital to restoring system CFM output and preventing motor overheating due to obstructed air paths.
Key Benefits- Precision Airflow Management: The Heil Quaker 1184153 geometry is optimized to reduce turbulence, ensuring consistent cubic feet per minute (CFM) across the heat exchanger.
- Structural Integrity: Constructed from corrosion-resistant materials to withstand high-temperature fluctuations and humidity within the air handler.
- Vibration Reduction: Engineered to minimize harmonic resonance, protecting the blower motor bearings and increasing overall system quietness.
- OEM Compatibility: Guaranteed fit for specific ICP family models, eliminating the need for field modifications during installation.
- How do I know if the blower housing needs replacement versus just the motor? Inspect the scroll and discharge areas for physical deformation, heavy corrosion, or cracks. If the blower wheel is rubbing against the sides despite a balanced motor, the housing is likely warped.
- Does this housing include the blower wheel or motor? This part number typically refers to the blower housing assembly only. The blower wheel, motor, and run capacitor must be sourced separately unless specified as a complete blower deck.
- Is this compatible with 10 SEER packaged units? Yes, the 1184153 is a standard component in various 10 SEER and 13 SEER ICP packaged products. Always verify your specific model number on the rating plate before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $163.02
-65%$163.02
$57.06Heil Quaker ICP 1184153 Blower Housing
The Heil Quaker ICP 1184153 Blower Housing is a critical structural component engineered for high-static pressure environments within residential and light commercial HVAC systems. This 9-inch blower housing assembly is designed to precisely encapsulate the blower wheel, optimizing airflow dynamics and ensuring maximum static efficiency during both heating and cooling cycles. Manufactured by International Comfort Products (ICP), this part serves as an authentic OEM HVAC replacement part for brands including Arcoaire, Comfortmaker, and Heil. Its heavy-gauge steel construction provides the necessary rigidity to dampen operational vibrations, which prevents premature mechanical wear on the indoor blower motor and mounting brackets.
For technicians performing a furnace blower repair, the 1184153 offers a direct-fit solution that maintains the original equipment?s factory specifications. Proper housing alignment is essential for maintaining the tight clearances required for efficient air movement and systemic pressure balance. This assembly is frequently utilized in packaged units and gas furnaces to house 5-5/8 inch diameter motors and associated blower wheels. Replacing a warped or corroded housing is vital to restoring system CFM output and preventing motor overheating due to obstructed air paths.
Key Benefits- Precision Airflow Management: The Heil Quaker 1184153 geometry is optimized to reduce turbulence, ensuring consistent cubic feet per minute (CFM) across the heat exchanger.
- Structural Integrity: Constructed from corrosion-resistant materials to withstand high-temperature fluctuations and humidity within the air handler.
- Vibration Reduction: Engineered to minimize harmonic resonance, protecting the blower motor bearings and increasing overall system quietness.
- OEM Compatibility: Guaranteed fit for specific ICP family models, eliminating the need for field modifications during installation.
- How do I know if the blower housing needs replacement versus just the motor? Inspect the scroll and discharge areas for physical deformation, heavy corrosion, or cracks. If the blower wheel is rubbing against the sides despite a balanced motor, the housing is likely warped.
- Does this housing include the blower wheel or motor? This part number typically refers to the blower housing assembly only. The blower wheel, motor, and run capacitor must be sourced separately unless specified as a complete blower deck.
- Is this compatible with 10 SEER packaged units? Yes, the 1184153 is a standard component in various 10 SEER and 13 SEER ICP packaged products. Always verify your specific model number on the rating plate before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1184153 Blower Housing is a critical structural component engineered for high-static pressure environments within residential and light commercial HVAC systems. This 9-inch blower housing assembly is designed to precisely encapsulate the blower wheel, optimizing airflow dynamics and ensuring maximum static efficiency during both heating and cooling cycles. Manufactured by International Comfort Products (ICP), this part serves as an authentic OEM HVAC replacement part for brands including Arcoaire, Comfortmaker, and Heil. Its heavy-gauge steel construction provides the necessary rigidity to dampen operational vibrations, which prevents premature mechanical wear on the indoor blower motor and mounting brackets.
For technicians performing a furnace blower repair, the 1184153 offers a direct-fit solution that maintains the original equipment?s factory specifications. Proper housing alignment is essential for maintaining the tight clearances required for efficient air movement and systemic pressure balance. This assembly is frequently utilized in packaged units and gas furnaces to house 5-5/8 inch diameter motors and associated blower wheels. Replacing a warped or corroded housing is vital to restoring system CFM output and preventing motor overheating due to obstructed air paths.
Key Benefits- Precision Airflow Management: The Heil Quaker 1184153 geometry is optimized to reduce turbulence, ensuring consistent cubic feet per minute (CFM) across the heat exchanger.
- Structural Integrity: Constructed from corrosion-resistant materials to withstand high-temperature fluctuations and humidity within the air handler.
- Vibration Reduction: Engineered to minimize harmonic resonance, protecting the blower motor bearings and increasing overall system quietness.
- OEM Compatibility: Guaranteed fit for specific ICP family models, eliminating the need for field modifications during installation.
- How do I know if the blower housing needs replacement versus just the motor? Inspect the scroll and discharge areas for physical deformation, heavy corrosion, or cracks. If the blower wheel is rubbing against the sides despite a balanced motor, the housing is likely warped.
- Does this housing include the blower wheel or motor? This part number typically refers to the blower housing assembly only. The blower wheel, motor, and run capacitor must be sourced separately unless specified as a complete blower deck.
- Is this compatible with 10 SEER packaged units? Yes, the 1184153 is a standard component in various 10 SEER and 13 SEER ICP packaged products. Always verify your specific model number on the rating plate before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
