Heil Quaker ICP 1183455 Ignitor Bracket
As a veteran HVACR technician, you know that a misaligned or loose igniter is a common service call that leads to delayed ignition or premature element failure. The Heil Quaker ICP 1183455 Ignitor Bracket is the specific OEM furnace replacement part required to maintain the precise spatial geometry between the pilot assembly and the burner carryover. In high-efficiency gas furnaces, proper bracket positioning is critical for ensuring the hot surface igniter (HSI) stays out of the direct burner flame while effectively initiating the combustion cycle. This stamped-metal bracket is compatible with a wide range of intercity products (ICP), including Heil, Tempstar, Comfortmaker, and Snyder General units. When dealing with furnace ignition failure, replacing a compromised or corroded bracket with a genuine ICP 1183455 ensures the igniter mounting holes align perfectly with the burner support, protecting the fragile ceramic block from vibration and thermal stress. This is a non-cancelable and non-returnable part, so verify your Heil Quaker furnace model number before ordering to ensure the mounting screw pattern matches your heat exchanger configuration.
Key Benefits:- Precision Alignment: Engineered to the exact OEM specifications for Heil and ICP furnaces, ensuring the igniter element is positioned correctly relative to the gas flow.
- Durable Construction: Fabricated from high-temperature resistant treated steel to withstand the extreme thermal cycling within the burner compartment.
- Simplified Installation: Features pre-drilled mounting holes that match the ICP burner support bracket, allowing for a direct bolt-on swap during maintenance.
- Reliable Performance: Critical for preventing nuisance ignition lockouts by maintaining a stable, vibration-free platform for the sensitive HSI component.
- Broad Compatibility: Fits various 80% and 90%+ AFUE models, including series F8MTL, F8MVL, and N9MSE.
Is the 1183455 bracket compatible with all ICP furnace brands?
Yes, this ignitor bracket is a universal component across the Heil Quaker, Tempstar, Arcoaire, and KeepRite families, provided the part number matches your specific service manual.
Do I need to replace the igniter and bracket at the same time?
While not mandatory, technicians often find that if the original mounting bracket is warped or heavily oxidized, it can stress the igniter. Replacing both ensures a stable ignition sequence.
How can I confirm this is the correct bracket for my model?
Check the HVAC specifications plate on your furnace; if the parts list calls for Heil Quaker 1183455, this is the exact match. Note that this item is Non-Cancelable / Non-Returnable.
Item is Non-Cancelable / Non-Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $0.50
-66%$0.50
$0.17Heil Quaker ICP 1183455 Ignitor Bracket
As a veteran HVACR technician, you know that a misaligned or loose igniter is a common service call that leads to delayed ignition or premature element failure. The Heil Quaker ICP 1183455 Ignitor Bracket is the specific OEM furnace replacement part required to maintain the precise spatial geometry between the pilot assembly and the burner carryover. In high-efficiency gas furnaces, proper bracket positioning is critical for ensuring the hot surface igniter (HSI) stays out of the direct burner flame while effectively initiating the combustion cycle. This stamped-metal bracket is compatible with a wide range of intercity products (ICP), including Heil, Tempstar, Comfortmaker, and Snyder General units. When dealing with furnace ignition failure, replacing a compromised or corroded bracket with a genuine ICP 1183455 ensures the igniter mounting holes align perfectly with the burner support, protecting the fragile ceramic block from vibration and thermal stress. This is a non-cancelable and non-returnable part, so verify your Heil Quaker furnace model number before ordering to ensure the mounting screw pattern matches your heat exchanger configuration.
Key Benefits:- Precision Alignment: Engineered to the exact OEM specifications for Heil and ICP furnaces, ensuring the igniter element is positioned correctly relative to the gas flow.
- Durable Construction: Fabricated from high-temperature resistant treated steel to withstand the extreme thermal cycling within the burner compartment.
- Simplified Installation: Features pre-drilled mounting holes that match the ICP burner support bracket, allowing for a direct bolt-on swap during maintenance.
- Reliable Performance: Critical for preventing nuisance ignition lockouts by maintaining a stable, vibration-free platform for the sensitive HSI component.
- Broad Compatibility: Fits various 80% and 90%+ AFUE models, including series F8MTL, F8MVL, and N9MSE.
Is the 1183455 bracket compatible with all ICP furnace brands?
Yes, this ignitor bracket is a universal component across the Heil Quaker, Tempstar, Arcoaire, and KeepRite families, provided the part number matches your specific service manual.
Do I need to replace the igniter and bracket at the same time?
While not mandatory, technicians often find that if the original mounting bracket is warped or heavily oxidized, it can stress the igniter. Replacing both ensures a stable ignition sequence.
How can I confirm this is the correct bracket for my model?
Check the HVAC specifications plate on your furnace; if the parts list calls for Heil Quaker 1183455, this is the exact match. Note that this item is Non-Cancelable / Non-Returnable.
Item is Non-Cancelable / Non-Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
As a veteran HVACR technician, you know that a misaligned or loose igniter is a common service call that leads to delayed ignition or premature element failure. The Heil Quaker ICP 1183455 Ignitor Bracket is the specific OEM furnace replacement part required to maintain the precise spatial geometry between the pilot assembly and the burner carryover. In high-efficiency gas furnaces, proper bracket positioning is critical for ensuring the hot surface igniter (HSI) stays out of the direct burner flame while effectively initiating the combustion cycle. This stamped-metal bracket is compatible with a wide range of intercity products (ICP), including Heil, Tempstar, Comfortmaker, and Snyder General units. When dealing with furnace ignition failure, replacing a compromised or corroded bracket with a genuine ICP 1183455 ensures the igniter mounting holes align perfectly with the burner support, protecting the fragile ceramic block from vibration and thermal stress. This is a non-cancelable and non-returnable part, so verify your Heil Quaker furnace model number before ordering to ensure the mounting screw pattern matches your heat exchanger configuration.
Key Benefits:- Precision Alignment: Engineered to the exact OEM specifications for Heil and ICP furnaces, ensuring the igniter element is positioned correctly relative to the gas flow.
- Durable Construction: Fabricated from high-temperature resistant treated steel to withstand the extreme thermal cycling within the burner compartment.
- Simplified Installation: Features pre-drilled mounting holes that match the ICP burner support bracket, allowing for a direct bolt-on swap during maintenance.
- Reliable Performance: Critical for preventing nuisance ignition lockouts by maintaining a stable, vibration-free platform for the sensitive HSI component.
- Broad Compatibility: Fits various 80% and 90%+ AFUE models, including series F8MTL, F8MVL, and N9MSE.
Is the 1183455 bracket compatible with all ICP furnace brands?
Yes, this ignitor bracket is a universal component across the Heil Quaker, Tempstar, Arcoaire, and KeepRite families, provided the part number matches your specific service manual.
Do I need to replace the igniter and bracket at the same time?
While not mandatory, technicians often find that if the original mounting bracket is warped or heavily oxidized, it can stress the igniter. Replacing both ensures a stable ignition sequence.
How can I confirm this is the correct bracket for my model?
Check the HVAC specifications plate on your furnace; if the parts list calls for Heil Quaker 1183455, this is the exact match. Note that this item is Non-Cancelable / Non-Returnable.
Item is Non-Cancelable / Non-Returnable
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
