Heil Quaker ICP 1179950 Motor
The Heil Quaker ICP 1179950 Motor is a high-performance, single-phase HVAC blower motor or condenser fan motor depending on specific system configurations. Operating at 208-230V, this 1/4 HP unit provides a steady 825 RPM, which is critical for maintaining correct CFM across the heat exchanger or coil. As a PSC (Permanent Split Capacitor) motor, it requires a precision-matched run capacitor to ensure optimal torque and thermal efficiency during high-demand cycles.
For contractors, this OEM replacement motor is a direct drop-in for various International Comfort Products (ICP) brands, including Heil, Tempstar, and Comfortmaker. The lower 825 RPM rating is specifically engineered for quiet operation and increased air-over cooling capacity in residential units. When performing a swap, verify that the fan blade or blower wheel is balanced and that the lead wire configuration matches your existing condenser motor or air handler harness to prevent premature bearing wear or field-induced failure.
- Precise 825 RPM: Optimized for specific air-flow requirements to prevent high-limit trips or coil freezing.
- 208-230V Single-Phase: Standardized voltage for seamless integration into most residential HVAC replacement parts setups.
- Professional Grade Durability: Engineered by Heil Quaker for long-term cycling in demanding exterior or attic environments.
- Broad ICP Compatibility: Fits a wide range of 1/4 HP applications within the ICP family of equipment.
Common Questions
What are the symptoms of a failing 1179950 motor?Technicians usually look for the motor drawing higher-than-rated amps, the external housing being too hot to touch, or the fan requiring a manual "nudge" to start, which often indicates a failed HVAC run capacitor or integrated thermal overload.
Can I use a higher RPM motor as a substitute?It is not recommended. Increasing the RPM can overload the motor windings by changing the static pressure load, potentially leading to immediate failure and improper heat transfer across the system.
How do I confirm this is the right part for my Heil/ICP unit?Check the data plate on your current motor for the 1179950 part number or cross-reference the 1/4 HP, 208-230V, and 825 RPM specs to ensure the physical frame size and rotation match your housing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Heil Quaker ICP 1179950 Motor
The Heil Quaker ICP 1179950 Motor is a high-performance, single-phase HVAC blower motor or condenser fan motor depending on specific system configurations. Operating at 208-230V, this 1/4 HP unit provides a steady 825 RPM, which is critical for maintaining correct CFM across the heat exchanger or coil. As a PSC (Permanent Split Capacitor) motor, it requires a precision-matched run capacitor to ensure optimal torque and thermal efficiency during high-demand cycles.
For contractors, this OEM replacement motor is a direct drop-in for various International Comfort Products (ICP) brands, including Heil, Tempstar, and Comfortmaker. The lower 825 RPM rating is specifically engineered for quiet operation and increased air-over cooling capacity in residential units. When performing a swap, verify that the fan blade or blower wheel is balanced and that the lead wire configuration matches your existing condenser motor or air handler harness to prevent premature bearing wear or field-induced failure.
- Precise 825 RPM: Optimized for specific air-flow requirements to prevent high-limit trips or coil freezing.
- 208-230V Single-Phase: Standardized voltage for seamless integration into most residential HVAC replacement parts setups.
- Professional Grade Durability: Engineered by Heil Quaker for long-term cycling in demanding exterior or attic environments.
- Broad ICP Compatibility: Fits a wide range of 1/4 HP applications within the ICP family of equipment.
Common Questions
What are the symptoms of a failing 1179950 motor?Technicians usually look for the motor drawing higher-than-rated amps, the external housing being too hot to touch, or the fan requiring a manual "nudge" to start, which often indicates a failed HVAC run capacitor or integrated thermal overload.
Can I use a higher RPM motor as a substitute?It is not recommended. Increasing the RPM can overload the motor windings by changing the static pressure load, potentially leading to immediate failure and improper heat transfer across the system.
How do I confirm this is the right part for my Heil/ICP unit?Check the data plate on your current motor for the 1179950 part number or cross-reference the 1/4 HP, 208-230V, and 825 RPM specs to ensure the physical frame size and rotation match your housing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1179950 Motor is a high-performance, single-phase HVAC blower motor or condenser fan motor depending on specific system configurations. Operating at 208-230V, this 1/4 HP unit provides a steady 825 RPM, which is critical for maintaining correct CFM across the heat exchanger or coil. As a PSC (Permanent Split Capacitor) motor, it requires a precision-matched run capacitor to ensure optimal torque and thermal efficiency during high-demand cycles.
For contractors, this OEM replacement motor is a direct drop-in for various International Comfort Products (ICP) brands, including Heil, Tempstar, and Comfortmaker. The lower 825 RPM rating is specifically engineered for quiet operation and increased air-over cooling capacity in residential units. When performing a swap, verify that the fan blade or blower wheel is balanced and that the lead wire configuration matches your existing condenser motor or air handler harness to prevent premature bearing wear or field-induced failure.
- Precise 825 RPM: Optimized for specific air-flow requirements to prevent high-limit trips or coil freezing.
- 208-230V Single-Phase: Standardized voltage for seamless integration into most residential HVAC replacement parts setups.
- Professional Grade Durability: Engineered by Heil Quaker for long-term cycling in demanding exterior or attic environments.
- Broad ICP Compatibility: Fits a wide range of 1/4 HP applications within the ICP family of equipment.
Common Questions
What are the symptoms of a failing 1179950 motor?Technicians usually look for the motor drawing higher-than-rated amps, the external housing being too hot to touch, or the fan requiring a manual "nudge" to start, which often indicates a failed HVAC run capacitor or integrated thermal overload.
Can I use a higher RPM motor as a substitute?It is not recommended. Increasing the RPM can overload the motor windings by changing the static pressure load, potentially leading to immediate failure and improper heat transfer across the system.
How do I confirm this is the right part for my Heil/ICP unit?Check the data plate on your current motor for the 1179950 part number or cross-reference the 1/4 HP, 208-230V, and 825 RPM specs to ensure the physical frame size and rotation match your housing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
