Heil Quaker ICP 1179081 Inducer Kit
The Heil Quaker ICP 1179081 Inducer Kit is a direct OEM-spec replacement for gas furnace exhaust systems requiring a 2-speed 115V draft inducer assembly. This kit is designed to maintain the precise air-to-fuel ratio necessary for optimal combustion and to effectively purge flue gases through the heat exchanger. Built with a high-efficiency PSC motor and featuring ball bearings for reduced friction, this assembly replaces several legacy parts, including the 320725-756 and HC27CB115. As a critical safety component, the 1179081 ensures that the furnace pressure switch is properly satisfied, preventing the hazardous buildup of combustion byproducts. The assembly is rated for 1.02 Amps at 3300 RPM and comes pre-fitted with the necessary blower wheel and 3-prong Molex plug for a seamless field installation. When diagnosing a Heil 90% gas furnace, this inducer kit provides the exact mechanical tolerances needed to restore original factory performance in 40K to 100K BTU units.
Key Benefits- Precision Exhaust Flow: Restores the necessary negative pressure draft to safely move hot flue gases through the heat exchanger.
- Direct OEM Compatibility: Engineered specifically for ICP, Heil, Tempstar, and Comfortmaker furnaces; replaces part numbers 1179081, 320725-756, and 320725756.
- Heavy-Duty Construction: Features high-temperature housing materials and ball bearings to withstand corrosive condensate and heat fatigue.
- Quiet Operation: The balanced blower wheel and PSC motor design minimize vibration and common rattling sounds associated with worn inducer bearings.
- Field-Ready Assembly: Includes the 2-speed plug, cooling fan, and mounting grommets to reduce downtime during emergency repairs.
- What are the signs that my ICP inducer motor is failing? Technicians usually look for seized bearings that prevent the shaft from spinning, a humming sound without movement, or a "pressure switch stuck open" error code on the control board.
- Is this 1179081 kit compatible with 2-speed furnaces? Yes, this assembly is designed for 115V systems and includes the 2-speed wiring harness characteristic of high-efficiency Heil and Tempstar units.
- Why is there water in my draft inducer housing? On 90% efficiency furnaces, condensate can back up if the drain lines are clogged or if the furnace is not pitched correctly, which may eventually lead to motor failure or pressure switch trips.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Heil Quaker ICP 1179081 Inducer Kit
The Heil Quaker ICP 1179081 Inducer Kit is a direct OEM-spec replacement for gas furnace exhaust systems requiring a 2-speed 115V draft inducer assembly. This kit is designed to maintain the precise air-to-fuel ratio necessary for optimal combustion and to effectively purge flue gases through the heat exchanger. Built with a high-efficiency PSC motor and featuring ball bearings for reduced friction, this assembly replaces several legacy parts, including the 320725-756 and HC27CB115. As a critical safety component, the 1179081 ensures that the furnace pressure switch is properly satisfied, preventing the hazardous buildup of combustion byproducts. The assembly is rated for 1.02 Amps at 3300 RPM and comes pre-fitted with the necessary blower wheel and 3-prong Molex plug for a seamless field installation. When diagnosing a Heil 90% gas furnace, this inducer kit provides the exact mechanical tolerances needed to restore original factory performance in 40K to 100K BTU units.
Key Benefits- Precision Exhaust Flow: Restores the necessary negative pressure draft to safely move hot flue gases through the heat exchanger.
- Direct OEM Compatibility: Engineered specifically for ICP, Heil, Tempstar, and Comfortmaker furnaces; replaces part numbers 1179081, 320725-756, and 320725756.
- Heavy-Duty Construction: Features high-temperature housing materials and ball bearings to withstand corrosive condensate and heat fatigue.
- Quiet Operation: The balanced blower wheel and PSC motor design minimize vibration and common rattling sounds associated with worn inducer bearings.
- Field-Ready Assembly: Includes the 2-speed plug, cooling fan, and mounting grommets to reduce downtime during emergency repairs.
- What are the signs that my ICP inducer motor is failing? Technicians usually look for seized bearings that prevent the shaft from spinning, a humming sound without movement, or a "pressure switch stuck open" error code on the control board.
- Is this 1179081 kit compatible with 2-speed furnaces? Yes, this assembly is designed for 115V systems and includes the 2-speed wiring harness characteristic of high-efficiency Heil and Tempstar units.
- Why is there water in my draft inducer housing? On 90% efficiency furnaces, condensate can back up if the drain lines are clogged or if the furnace is not pitched correctly, which may eventually lead to motor failure or pressure switch trips.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1179081 Inducer Kit is a direct OEM-spec replacement for gas furnace exhaust systems requiring a 2-speed 115V draft inducer assembly. This kit is designed to maintain the precise air-to-fuel ratio necessary for optimal combustion and to effectively purge flue gases through the heat exchanger. Built with a high-efficiency PSC motor and featuring ball bearings for reduced friction, this assembly replaces several legacy parts, including the 320725-756 and HC27CB115. As a critical safety component, the 1179081 ensures that the furnace pressure switch is properly satisfied, preventing the hazardous buildup of combustion byproducts. The assembly is rated for 1.02 Amps at 3300 RPM and comes pre-fitted with the necessary blower wheel and 3-prong Molex plug for a seamless field installation. When diagnosing a Heil 90% gas furnace, this inducer kit provides the exact mechanical tolerances needed to restore original factory performance in 40K to 100K BTU units.
Key Benefits- Precision Exhaust Flow: Restores the necessary negative pressure draft to safely move hot flue gases through the heat exchanger.
- Direct OEM Compatibility: Engineered specifically for ICP, Heil, Tempstar, and Comfortmaker furnaces; replaces part numbers 1179081, 320725-756, and 320725756.
- Heavy-Duty Construction: Features high-temperature housing materials and ball bearings to withstand corrosive condensate and heat fatigue.
- Quiet Operation: The balanced blower wheel and PSC motor design minimize vibration and common rattling sounds associated with worn inducer bearings.
- Field-Ready Assembly: Includes the 2-speed plug, cooling fan, and mounting grommets to reduce downtime during emergency repairs.
- What are the signs that my ICP inducer motor is failing? Technicians usually look for seized bearings that prevent the shaft from spinning, a humming sound without movement, or a "pressure switch stuck open" error code on the control board.
- Is this 1179081 kit compatible with 2-speed furnaces? Yes, this assembly is designed for 115V systems and includes the 2-speed wiring harness characteristic of high-efficiency Heil and Tempstar units.
- Why is there water in my draft inducer housing? On 90% efficiency furnaces, condensate can back up if the drain lines are clogged or if the furnace is not pitched correctly, which may eventually lead to motor failure or pressure switch trips.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
