Heil Quaker ICP 1174848 Motor
The Heil Quaker ICP 1174848 Motor is a high-performance 1/8 HP condenser fan motor designed for direct integration into International Comfort Products (ICP) equipment, including Heil, Tempstar, and Comfortmaker condensing units. This single-speed, 208-230V 1PH motor operates at a nominal 1500 RPM, providing the high-static pressure capabilities required for efficient heat rejection in residential and light commercial AC and heat pump systems. Engineered to replace OEM part numbers such as HC35GE208 and 5KCP39BGR995S, this 48Y frame motor features a 5-5/8 inch diameter and a 1/2 inch shaft suitable for standard fan blade hubs. Its robust permanent split capacitor (PSC) design ensures reliable starting and thermal protection under demanding summer lift conditions. For service professionals, this motor offers a precise mechanical fit and electrical compatibility to restore factory-spec airflow and maintain critical system head pressures without the need for field modifications or generic bracketry.
Key Benefits- OEM Compatibility: Drops directly into ICP, Heil, and Tempstar chassis, ensuring correct shaft height and mounting bolt alignment.
- Optimized Heat Exchange: The 1500 RPM operation is calibrated to move the exact CFM required to keep compressor discharge temperatures within safe limits.
- Heavy-Duty Construction: Features a moisture-resistant 48 frame housing with internal thermal overload protection to prevent winding burnout during high-ambient operation.
- Standardized Electrical Specs: Matches the 208-230V single-phase power profiles of standard residential split systems for seamless wiring.
What capacitor is required for the ICP 1174848?
Standard PSC 1/8 HP motors of this class typically require a 5 MFD or 7.5 MFD / 370V run capacitor. Always verify the MFD rating on the new motor nameplate and replace the capacitor during installation to ensure motor longevity.
Can this motor replace a 1075 RPM unit?
No. While physical mounting may be similar, the 1500 RPM speed is significantly higher. Using a lower RPM motor will result in insufficient airflow and high head pressure, while using this to replace a lower speed motor may overload the circuit or damage the fan blade.
Is this motor reversible in the field?
This specific OEM replacement is typically fixed-rotation (Counter-Clockwise Lead End). Technicians should verify rotation direction against the existing fan blade pitch before mounting to ensure air is pulled through the coil and exhausted out the top.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Heil Quaker ICP 1174848 Motor
The Heil Quaker ICP 1174848 Motor is a high-performance 1/8 HP condenser fan motor designed for direct integration into International Comfort Products (ICP) equipment, including Heil, Tempstar, and Comfortmaker condensing units. This single-speed, 208-230V 1PH motor operates at a nominal 1500 RPM, providing the high-static pressure capabilities required for efficient heat rejection in residential and light commercial AC and heat pump systems. Engineered to replace OEM part numbers such as HC35GE208 and 5KCP39BGR995S, this 48Y frame motor features a 5-5/8 inch diameter and a 1/2 inch shaft suitable for standard fan blade hubs. Its robust permanent split capacitor (PSC) design ensures reliable starting and thermal protection under demanding summer lift conditions. For service professionals, this motor offers a precise mechanical fit and electrical compatibility to restore factory-spec airflow and maintain critical system head pressures without the need for field modifications or generic bracketry.
Key Benefits- OEM Compatibility: Drops directly into ICP, Heil, and Tempstar chassis, ensuring correct shaft height and mounting bolt alignment.
- Optimized Heat Exchange: The 1500 RPM operation is calibrated to move the exact CFM required to keep compressor discharge temperatures within safe limits.
- Heavy-Duty Construction: Features a moisture-resistant 48 frame housing with internal thermal overload protection to prevent winding burnout during high-ambient operation.
- Standardized Electrical Specs: Matches the 208-230V single-phase power profiles of standard residential split systems for seamless wiring.
What capacitor is required for the ICP 1174848?
Standard PSC 1/8 HP motors of this class typically require a 5 MFD or 7.5 MFD / 370V run capacitor. Always verify the MFD rating on the new motor nameplate and replace the capacitor during installation to ensure motor longevity.
Can this motor replace a 1075 RPM unit?
No. While physical mounting may be similar, the 1500 RPM speed is significantly higher. Using a lower RPM motor will result in insufficient airflow and high head pressure, while using this to replace a lower speed motor may overload the circuit or damage the fan blade.
Is this motor reversible in the field?
This specific OEM replacement is typically fixed-rotation (Counter-Clockwise Lead End). Technicians should verify rotation direction against the existing fan blade pitch before mounting to ensure air is pulled through the coil and exhausted out the top.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1174848 Motor is a high-performance 1/8 HP condenser fan motor designed for direct integration into International Comfort Products (ICP) equipment, including Heil, Tempstar, and Comfortmaker condensing units. This single-speed, 208-230V 1PH motor operates at a nominal 1500 RPM, providing the high-static pressure capabilities required for efficient heat rejection in residential and light commercial AC and heat pump systems. Engineered to replace OEM part numbers such as HC35GE208 and 5KCP39BGR995S, this 48Y frame motor features a 5-5/8 inch diameter and a 1/2 inch shaft suitable for standard fan blade hubs. Its robust permanent split capacitor (PSC) design ensures reliable starting and thermal protection under demanding summer lift conditions. For service professionals, this motor offers a precise mechanical fit and electrical compatibility to restore factory-spec airflow and maintain critical system head pressures without the need for field modifications or generic bracketry.
Key Benefits- OEM Compatibility: Drops directly into ICP, Heil, and Tempstar chassis, ensuring correct shaft height and mounting bolt alignment.
- Optimized Heat Exchange: The 1500 RPM operation is calibrated to move the exact CFM required to keep compressor discharge temperatures within safe limits.
- Heavy-Duty Construction: Features a moisture-resistant 48 frame housing with internal thermal overload protection to prevent winding burnout during high-ambient operation.
- Standardized Electrical Specs: Matches the 208-230V single-phase power profiles of standard residential split systems for seamless wiring.
What capacitor is required for the ICP 1174848?
Standard PSC 1/8 HP motors of this class typically require a 5 MFD or 7.5 MFD / 370V run capacitor. Always verify the MFD rating on the new motor nameplate and replace the capacitor during installation to ensure motor longevity.
Can this motor replace a 1075 RPM unit?
No. While physical mounting may be similar, the 1500 RPM speed is significantly higher. Using a lower RPM motor will result in insufficient airflow and high head pressure, while using this to replace a lower speed motor may overload the circuit or damage the fan blade.
Is this motor reversible in the field?
This specific OEM replacement is typically fixed-rotation (Counter-Clockwise Lead End). Technicians should verify rotation direction against the existing fan blade pitch before mounting to ensure air is pulled through the coil and exhausted out the top.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
