Heil Quaker ICP 1173689 Capacitor
The Heil Quaker ICP 1173689 Capacitor is a high-performance electrical component engineered for demanding HVACR applications, specifically within contactor circuits and single-phase AC motor starters. When you are out in the field dealing with a non-responsive compressor or a failing blower motor, having an OEM ICP replacement part ensures the component meets the precise capacitance and 24V voltage rating required for the low-voltage control side of the system. This unit is designed for reliable energy management, providing the phase shift necessary to cycle high-draw loads without premature failure. Technical details confirm a 25A current rating, making it a robust choice for 1-pole contactor interfaces where efficiency and heat dissipation are critical. Verified for 50/60Hz systems, this capacitor withstands the rigorous duty cycles typical of commercial and residential condensers. Ensure you verify the microfarad (MFD) rating against the existing motor label before installation to maintain proper torque and operating speeds.
Key Benefits:- Ensures precise phase displacement for optimal motor starting torque and efficiency.
- Rated for 25 Amperes at 24 Volts, providing high-reliability performance in control circuits.
- Compatible with a wide range of ICP, Heil, and Tempstar condensing units and furnace systems.
- Built for industrial-grade durability to withstand thermal stress and frequent start/stop cycles.
- Facilitates low-voltage control of 1P contactors, reducing wear on electrical contact points.
Is this capacitor compatible with 440V applications?
This specific 1173689 component is optimized for 24V control circuits and 25A 1-pole contactors. Always match the voltage and MFD rating of your original Heil Quaker parts to avoid damaging the motor windings.
What are the signs that my ICP capacitor needs replacement?
Technicians should look for physical signs like bulging or fluid leakage, or use a multimeter to check if the reading is within the ?10% capacitance tolerance. If the compressor hums but won't start, the capacitor is likely the culprit.
Can I use this for both fan and compressor motors?
This part is a single-run electrical component often paired with a 1P contactor. For systems requiring simultaneous fan and compressor support, verify if a dual-run capacitor is needed instead.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $62.94
-65%$62.94
$22.03Heil Quaker ICP 1173689 Capacitor
The Heil Quaker ICP 1173689 Capacitor is a high-performance electrical component engineered for demanding HVACR applications, specifically within contactor circuits and single-phase AC motor starters. When you are out in the field dealing with a non-responsive compressor or a failing blower motor, having an OEM ICP replacement part ensures the component meets the precise capacitance and 24V voltage rating required for the low-voltage control side of the system. This unit is designed for reliable energy management, providing the phase shift necessary to cycle high-draw loads without premature failure. Technical details confirm a 25A current rating, making it a robust choice for 1-pole contactor interfaces where efficiency and heat dissipation are critical. Verified for 50/60Hz systems, this capacitor withstands the rigorous duty cycles typical of commercial and residential condensers. Ensure you verify the microfarad (MFD) rating against the existing motor label before installation to maintain proper torque and operating speeds.
Key Benefits:- Ensures precise phase displacement for optimal motor starting torque and efficiency.
- Rated for 25 Amperes at 24 Volts, providing high-reliability performance in control circuits.
- Compatible with a wide range of ICP, Heil, and Tempstar condensing units and furnace systems.
- Built for industrial-grade durability to withstand thermal stress and frequent start/stop cycles.
- Facilitates low-voltage control of 1P contactors, reducing wear on electrical contact points.
Is this capacitor compatible with 440V applications?
This specific 1173689 component is optimized for 24V control circuits and 25A 1-pole contactors. Always match the voltage and MFD rating of your original Heil Quaker parts to avoid damaging the motor windings.
What are the signs that my ICP capacitor needs replacement?
Technicians should look for physical signs like bulging or fluid leakage, or use a multimeter to check if the reading is within the ?10% capacitance tolerance. If the compressor hums but won't start, the capacitor is likely the culprit.
Can I use this for both fan and compressor motors?
This part is a single-run electrical component often paired with a 1P contactor. For systems requiring simultaneous fan and compressor support, verify if a dual-run capacitor is needed instead.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1173689 Capacitor is a high-performance electrical component engineered for demanding HVACR applications, specifically within contactor circuits and single-phase AC motor starters. When you are out in the field dealing with a non-responsive compressor or a failing blower motor, having an OEM ICP replacement part ensures the component meets the precise capacitance and 24V voltage rating required for the low-voltage control side of the system. This unit is designed for reliable energy management, providing the phase shift necessary to cycle high-draw loads without premature failure. Technical details confirm a 25A current rating, making it a robust choice for 1-pole contactor interfaces where efficiency and heat dissipation are critical. Verified for 50/60Hz systems, this capacitor withstands the rigorous duty cycles typical of commercial and residential condensers. Ensure you verify the microfarad (MFD) rating against the existing motor label before installation to maintain proper torque and operating speeds.
Key Benefits:- Ensures precise phase displacement for optimal motor starting torque and efficiency.
- Rated for 25 Amperes at 24 Volts, providing high-reliability performance in control circuits.
- Compatible with a wide range of ICP, Heil, and Tempstar condensing units and furnace systems.
- Built for industrial-grade durability to withstand thermal stress and frequent start/stop cycles.
- Facilitates low-voltage control of 1P contactors, reducing wear on electrical contact points.
Is this capacitor compatible with 440V applications?
This specific 1173689 component is optimized for 24V control circuits and 25A 1-pole contactors. Always match the voltage and MFD rating of your original Heil Quaker parts to avoid damaging the motor windings.
What are the signs that my ICP capacitor needs replacement?
Technicians should look for physical signs like bulging or fluid leakage, or use a multimeter to check if the reading is within the ?10% capacitance tolerance. If the compressor hums but won't start, the capacitor is likely the culprit.
Can I use this for both fan and compressor motors?
This part is a single-run electrical component often paired with a 1P contactor. For systems requiring simultaneous fan and compressor support, verify if a dual-run capacitor is needed instead.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
