Heil Quaker ICP 1171299 Housing
When dealing with draft inducer issues in Heil Quaker, Comfortmaker, or Tempstar furnaces, the Heil Quaker ICP 1171299 Housing is a critical structural component for maintaining proper flue gas velocity and pressure switch calibration. As a vent motor housing, this part is engineered to exacting OEM tolerances, ensuring a gas-tight seal and rigid support for the blower wheel and motor assembly. A direct replacement for ICP 1171299, this housing prevents the vibration and premature bearing wear often caused by warped or lower-grade aftermarket alternatives. For any furnace draft inducer repair, using a genuine ICP HVAC replacement part is non-negotiable for system safety and high-efficiency furnace maintenance. This draft inducer assembly enclosure is built to withstand the high-temperature corrosive condensate typical of induced-draft heating cycles, providing long-term reliability in the field. Contractors should always verify the specific vent motor housing cross-reference on the furnace rating plate to confirm this is the correct exhaust motor housing for the specific cabinet size and vent configuration.
Key Benefits for the Contractor- Precision OEM Alignment: Designed specifically for Heil Quaker and ICP units to ensure the inducer motor and wheel remain perfectly centered, preventing rubbing and noise.
- High-Temperature Durability: Constructed from reinforced materials that resist thermal stress and corrosion from flue gas byproducts.
- Vibration Dampening: The rigid housing structure absorbs operational harmonics, protecting the venter motor from mechanical fatigue.
- Seamless Fitment: Pre-drilled mounting points match the existing furnace collector box, reducing installation time and ensuring a reliable seal.
What are the signs that I need to replace the 1171299 housing rather than just the motor?
Inspect the internal walls for "scouring" marks from the blower wheel or visible cracks. If the housing is warped or the mounting ears are brittle, the entire ICP 1171299 unit must be replaced to prevent pressure switch trip-outs.
Which HVAC brands are compatible with this ICP housing?
This part is a standard component for many International Comfort Products (ICP) brands, including Heil, Quaker, KeepRite, Arcoaire, and Tempstar. Always cross-reference the part number with the specific furnace model.
Does this housing include the motor and blower wheel?
No, the 1171299 is the vent motor housing only. You will need to transfer your existing motor and wheel or purchase them separately to complete the draft inducer assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $162.84
-65%$162.84
$56.99Heil Quaker ICP 1171299 Housing
When dealing with draft inducer issues in Heil Quaker, Comfortmaker, or Tempstar furnaces, the Heil Quaker ICP 1171299 Housing is a critical structural component for maintaining proper flue gas velocity and pressure switch calibration. As a vent motor housing, this part is engineered to exacting OEM tolerances, ensuring a gas-tight seal and rigid support for the blower wheel and motor assembly. A direct replacement for ICP 1171299, this housing prevents the vibration and premature bearing wear often caused by warped or lower-grade aftermarket alternatives. For any furnace draft inducer repair, using a genuine ICP HVAC replacement part is non-negotiable for system safety and high-efficiency furnace maintenance. This draft inducer assembly enclosure is built to withstand the high-temperature corrosive condensate typical of induced-draft heating cycles, providing long-term reliability in the field. Contractors should always verify the specific vent motor housing cross-reference on the furnace rating plate to confirm this is the correct exhaust motor housing for the specific cabinet size and vent configuration.
Key Benefits for the Contractor- Precision OEM Alignment: Designed specifically for Heil Quaker and ICP units to ensure the inducer motor and wheel remain perfectly centered, preventing rubbing and noise.
- High-Temperature Durability: Constructed from reinforced materials that resist thermal stress and corrosion from flue gas byproducts.
- Vibration Dampening: The rigid housing structure absorbs operational harmonics, protecting the venter motor from mechanical fatigue.
- Seamless Fitment: Pre-drilled mounting points match the existing furnace collector box, reducing installation time and ensuring a reliable seal.
What are the signs that I need to replace the 1171299 housing rather than just the motor?
Inspect the internal walls for "scouring" marks from the blower wheel or visible cracks. If the housing is warped or the mounting ears are brittle, the entire ICP 1171299 unit must be replaced to prevent pressure switch trip-outs.
Which HVAC brands are compatible with this ICP housing?
This part is a standard component for many International Comfort Products (ICP) brands, including Heil, Quaker, KeepRite, Arcoaire, and Tempstar. Always cross-reference the part number with the specific furnace model.
Does this housing include the motor and blower wheel?
No, the 1171299 is the vent motor housing only. You will need to transfer your existing motor and wheel or purchase them separately to complete the draft inducer assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When dealing with draft inducer issues in Heil Quaker, Comfortmaker, or Tempstar furnaces, the Heil Quaker ICP 1171299 Housing is a critical structural component for maintaining proper flue gas velocity and pressure switch calibration. As a vent motor housing, this part is engineered to exacting OEM tolerances, ensuring a gas-tight seal and rigid support for the blower wheel and motor assembly. A direct replacement for ICP 1171299, this housing prevents the vibration and premature bearing wear often caused by warped or lower-grade aftermarket alternatives. For any furnace draft inducer repair, using a genuine ICP HVAC replacement part is non-negotiable for system safety and high-efficiency furnace maintenance. This draft inducer assembly enclosure is built to withstand the high-temperature corrosive condensate typical of induced-draft heating cycles, providing long-term reliability in the field. Contractors should always verify the specific vent motor housing cross-reference on the furnace rating plate to confirm this is the correct exhaust motor housing for the specific cabinet size and vent configuration.
Key Benefits for the Contractor- Precision OEM Alignment: Designed specifically for Heil Quaker and ICP units to ensure the inducer motor and wheel remain perfectly centered, preventing rubbing and noise.
- High-Temperature Durability: Constructed from reinforced materials that resist thermal stress and corrosion from flue gas byproducts.
- Vibration Dampening: The rigid housing structure absorbs operational harmonics, protecting the venter motor from mechanical fatigue.
- Seamless Fitment: Pre-drilled mounting points match the existing furnace collector box, reducing installation time and ensuring a reliable seal.
What are the signs that I need to replace the 1171299 housing rather than just the motor?
Inspect the internal walls for "scouring" marks from the blower wheel or visible cracks. If the housing is warped or the mounting ears are brittle, the entire ICP 1171299 unit must be replaced to prevent pressure switch trip-outs.
Which HVAC brands are compatible with this ICP housing?
This part is a standard component for many International Comfort Products (ICP) brands, including Heil, Quaker, KeepRite, Arcoaire, and Tempstar. Always cross-reference the part number with the specific furnace model.
Does this housing include the motor and blower wheel?
No, the 1171299 is the vent motor housing only. You will need to transfer your existing motor and wheel or purchase them separately to complete the draft inducer assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
