Heil Quaker ICP 1162930 Orifice
When you are dealing with fluctuating manifold pressure or inconsistent gas-to-air ratios, the Heil Quaker ICP 1162930 Orifice is the exact OEM specification required to restore factory-standard performance. This Main Burner Orifice #44 10pk is machined for International Comfort Products (ICP) systems, specifically engineered to meter gas flow with #44 drill size precision. In the field, using high-quality ICP burner orifices is the only way to ensure the combustion efficiency of the furnace matches the original data plate specs, particularly when resolving "yellow flame" issues or weak heat output caused by clogged or reamed-out parts.
Replacing these components in a full set ensures thermal efficiency across the entire burner assembly, preventing the uneven heat exchanger stress associated with mismatched BTU inputs. These orifices are critical for maintaining the correct gas flow regulation required to pull the proper vacuum through the venturi, ensuring a stable, blue flame. Whether you are performing a seasonal tune-up or a full manifold rebuild, these #44 gas orifices provide the reliability needed for professional-grade HVAC service.
Key Benefits
- Precision Metering: Machined to a #44 drill size for exact gas delivery, preventing over-firing or under-firing of the burner.
- OEM Compatibility: Designed specifically for Heil, Quaker, and other ICP-branded gas-fired heating systems to maintain certified system safety.
- Bulk Inventory: Sold as a 10-pack, providing technicians with ready replacements for residential or commercial multi-burner manifold service.
- Material Durability: High-grade construction resists the corrosive effects of natural gas and high-temperature environments near the burner port.
Common Questions
How do I know if I need a #44 orifice?
Always verify the drill size stamped on the side of the existing orifice or reference the furnace’s technical manual. A #44 size is common for specific BTU ratings at sea level; higher elevations may require a different specification.
Can I clean a clogged orifice instead of replacing it?
While superficial dust can be cleared with air, any internal blockage or carbon buildup should result in a replacement. Never use a drill bit or wire to ream out a 1162930 orifice, as even a microscopic change in diameter will compromise the combustion ratio and system safety.
Does this kit work for LP conversions?
This #44 orifice is typically sized for natural gas applications. For liquid propane (LP) conversions, always refer to the manufacturer’s conversion kit instructions, as LP usually requires a significantly smaller drill size due to its higher energy density.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $10.96
-65%$10.96
$3.84Heil Quaker ICP 1162930 Orifice
When you are dealing with fluctuating manifold pressure or inconsistent gas-to-air ratios, the Heil Quaker ICP 1162930 Orifice is the exact OEM specification required to restore factory-standard performance. This Main Burner Orifice #44 10pk is machined for International Comfort Products (ICP) systems, specifically engineered to meter gas flow with #44 drill size precision. In the field, using high-quality ICP burner orifices is the only way to ensure the combustion efficiency of the furnace matches the original data plate specs, particularly when resolving "yellow flame" issues or weak heat output caused by clogged or reamed-out parts.
Replacing these components in a full set ensures thermal efficiency across the entire burner assembly, preventing the uneven heat exchanger stress associated with mismatched BTU inputs. These orifices are critical for maintaining the correct gas flow regulation required to pull the proper vacuum through the venturi, ensuring a stable, blue flame. Whether you are performing a seasonal tune-up or a full manifold rebuild, these #44 gas orifices provide the reliability needed for professional-grade HVAC service.
Key Benefits
- Precision Metering: Machined to a #44 drill size for exact gas delivery, preventing over-firing or under-firing of the burner.
- OEM Compatibility: Designed specifically for Heil, Quaker, and other ICP-branded gas-fired heating systems to maintain certified system safety.
- Bulk Inventory: Sold as a 10-pack, providing technicians with ready replacements for residential or commercial multi-burner manifold service.
- Material Durability: High-grade construction resists the corrosive effects of natural gas and high-temperature environments near the burner port.
Common Questions
How do I know if I need a #44 orifice?
Always verify the drill size stamped on the side of the existing orifice or reference the furnace’s technical manual. A #44 size is common for specific BTU ratings at sea level; higher elevations may require a different specification.
Can I clean a clogged orifice instead of replacing it?
While superficial dust can be cleared with air, any internal blockage or carbon buildup should result in a replacement. Never use a drill bit or wire to ream out a 1162930 orifice, as even a microscopic change in diameter will compromise the combustion ratio and system safety.
Does this kit work for LP conversions?
This #44 orifice is typically sized for natural gas applications. For liquid propane (LP) conversions, always refer to the manufacturer’s conversion kit instructions, as LP usually requires a significantly smaller drill size due to its higher energy density.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you are dealing with fluctuating manifold pressure or inconsistent gas-to-air ratios, the Heil Quaker ICP 1162930 Orifice is the exact OEM specification required to restore factory-standard performance. This Main Burner Orifice #44 10pk is machined for International Comfort Products (ICP) systems, specifically engineered to meter gas flow with #44 drill size precision. In the field, using high-quality ICP burner orifices is the only way to ensure the combustion efficiency of the furnace matches the original data plate specs, particularly when resolving "yellow flame" issues or weak heat output caused by clogged or reamed-out parts.
Replacing these components in a full set ensures thermal efficiency across the entire burner assembly, preventing the uneven heat exchanger stress associated with mismatched BTU inputs. These orifices are critical for maintaining the correct gas flow regulation required to pull the proper vacuum through the venturi, ensuring a stable, blue flame. Whether you are performing a seasonal tune-up or a full manifold rebuild, these #44 gas orifices provide the reliability needed for professional-grade HVAC service.
Key Benefits
- Precision Metering: Machined to a #44 drill size for exact gas delivery, preventing over-firing or under-firing of the burner.
- OEM Compatibility: Designed specifically for Heil, Quaker, and other ICP-branded gas-fired heating systems to maintain certified system safety.
- Bulk Inventory: Sold as a 10-pack, providing technicians with ready replacements for residential or commercial multi-burner manifold service.
- Material Durability: High-grade construction resists the corrosive effects of natural gas and high-temperature environments near the burner port.
Common Questions
How do I know if I need a #44 orifice?
Always verify the drill size stamped on the side of the existing orifice or reference the furnace’s technical manual. A #44 size is common for specific BTU ratings at sea level; higher elevations may require a different specification.
Can I clean a clogged orifice instead of replacing it?
While superficial dust can be cleared with air, any internal blockage or carbon buildup should result in a replacement. Never use a drill bit or wire to ream out a 1162930 orifice, as even a microscopic change in diameter will compromise the combustion ratio and system safety.
Does this kit work for LP conversions?
This #44 orifice is typically sized for natural gas applications. For liquid propane (LP) conversions, always refer to the manufacturer’s conversion kit instructions, as LP usually requires a significantly smaller drill size due to its higher energy density.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
